My experience :
use this option to prevent the box to switch video card :
boot net video=atyfb:off
But display problems make it difficult to continue installation.
I tried with another option :
boot net video=atyfb:off DEBIAN_FRONTEND=text
but the installation hangs on hardware detection
So
Didrik Madheden wrote:
I also had problems getting the kernel to load correctly over network.
My solution to this was to connect the sparc over a serial console to
some other box. Provided that the terminal on the other side is
working correctly, the installation menus will work ok, although
they
I also had problems getting the kernel to load correctly over network.
My solution to this was to connect the sparc over a serial console to
some other box. Provided that the terminal on the other side is
working correctly, the installation menus will work ok, although
they'll be a bit sluggish at
Hi,
I try to install etch on a sunblade 150, I reached the stage
where I can see the first installer menu. For those who
encountered the same problems as me, I used the boot command:
boot net video=atyfb:off
My problem is that the menu isn't displayed correctly,
instead of colors on the bo
4 matches
Mail list logo
