Oh wise ones,
I am having problems with my modem. The modem is a PnP modem so I
have to initialize it with a dos PnP driver and then use loadlin to
boot. This is the time line and scenarios:
1) Had 0.93 w/ 1.2.13 minicom/pppd/chat all worked great, ppp/slhc as
modules. Modem is /dev/cua1
Hi all,
I have decided to assume that my ipfwadm/diald configuration works, and
will connect it to the internal network.
Now onto another subject, I need to set up mail services. My internal
network will have an eventual (dial-up) connection, so all mailboxes will
be handled by my ISP
In article [EMAIL PROTECTED] you write:
I have installed Debian 1.1.9 and xbase, xlib, xserver-svga, and fvwm
packages. I chose during xbase to use xdm to start x.. and during boot-up
I see the message starting xdm.. however typing xdm at a root prompt
doesn't do anything. I tried xinit and got
On Sun, 6 Oct 1996, Karl Ferguson wrote:
BTW, how do you pronounce Debian? Deb-E-an or Deb-I-an?
Debian was named around Debra and Ian Murdock (Ian being the founder).
Hence I can only pronounce it Deb-e-an - I've heard lots of people
pronounce it Dee-bee-an which makes my hair on the back
Yup no worries. Just installed the package from CD after Xfroms was
installed! This seemed to be important. Have you found the lyx list?
/dlh
On Fri, 4 Oct 1996 [EMAIL PROTECTED] wrote:
Has anyone got the word processor 'lyx' up and running? It depends, amongst
other things, on 'xforms'. What
On Sat, 5 Oct 1996, Joey Hess wrote:
joeyI installed this dosemu package, and just installing it locked my system
joeyup. I had to hit reset, and clean up all the errors on my filesystem that
joeycropped up.
What kernel version are you running and what version of the standard
library?
Has anyone got the word processor 'lyx' up and running? It
depends, amongst other things, on 'xforms'. What is xforms, and
where is it located?
I have. I got xforms off the Debian ftp site int the contrib directory.
Nathan
$ dpkg -s xforms
Package: xforms
Status: install ok
Anyone using the sbpcd driver? Until last night my server at home here
(a 386/40/8) was running some mess vaguely resembling Slackware 2.3
and 3.0, and I upgraded it to Debian last night. sbpcd was compiled
in to the kernel before, but with Debian it's a module. When I go
insmod sbpcd
On Fri, 4 Oct 1996, Lars Wirzenius wrote:
Lawrence Chim:
when install info2www and dwww, they said that they cannot
find the httpd. I think it is because I am using apache
and http daemon name is apache rather than httpd.
Is is a install script problem? or a file dependancy
Lars Wirzenius wrote:
changed with 1.1.1. The Debian package I have (1.1.1-5) does
not install cleanly and does not work, and I haven't been able
to test my fixes for dwww and info2www. I'm working on it.
I have 1.1.1-5 and it works and installed fine.
--
Daniel
==
Dear Sir or Madam,
I'm having difficulty getting debian linux installed on my computer.
It boots alright, partitions the disk, initializes the swap and root
partitions, and mounts '/' on the root partition. Then, when I insert
the first base disk (when prompted) it comes up with a
In your email to me, [EMAIL PROTECTED], you wrote:
Hello all ...
I have a strange problem that consistently comes up upon a reboot of
two Debian nodes of mine.
After these nodes reboot (cold or warm) no one can telnet to, or
ping ... to them.
I installed this dosemu package, and just installing it locked my system
up. I had to hit reset, and clean up all the errors on my filesystem that
cropped up.
Now dpkg reports dosemu as:
Status: install ok half-configured
What I saw on my screen was that dpkg installed the package, and ran the
jhspies == jhspies [EMAIL PROTECTED] writes:
jhspies Thank you to everyone who responded to my previous
jhspies questions on smail. I have a dialup-ppp connection with
jhspies an Internet Service Provider. My usename at the ISP is
jhspies jhspies while I use js as a username
For an easier installation dselect needs a major rewrite IMHO. From all
Linux distributions i installed until now Debian was the most
counterintuitive i've stumbled over so far. I used the german distribution
I installed Debian 1.1.5 about 1 1/2 months ago. I don't know what all the
fuss about
I am using Latex and it is working fine. I used the stable tex packages
and then picked up mfbasfnt_1.0-5.deb and mfdcfnt_1.0-1_all.deb from the
ftp site. (They are in rex and non-free I believe.)
Or as previous discussions indicated you could install the tetex or
ntex packages into
The web site archives seem to have disappeared - probably being
digested. So this may have been answered.
I just installed Debian 1.1.4 on a new hard drive and can't get
ppp going. I have kernel support and asked that the module be
loaded as well. I am missing something simple.
I have built
On Fri, 4 Oct 1996, Marcel Burggraeve wrote:
I know you can use your .bash_profile to let you see the current
directory and a prompt ( like in dos or os/2 )
I do have a profile which does this but was wondering if some people
could post their profiles so maybe I can choose another which I
I wrote:
The names of the Apache server executable file and the default
locations of the server's HTML directory and cgi-bin directory
changed with 1.1.1. The Debian package I have (1.1.1-5) does
not install cleanly and does not work, and I haven't been able
to test my fixes for dwww and
Kevin Traas wrote:
I've tried enabling the port by adding the proper entry to inittab
(working from memory at the moment) as follows:
S1:234:respawn:/etc/getty ttyS1 DT9600 vt100
Note that executables have been banished from /etc by FSSTND for a
long time. Try /sbin/getty, and you may
I've tried enabling the port by adding the proper entry to inittab
(working from memory at the moment) as follows:
S1:234:respawn:/etc/getty ttyS1 DT9600 vt100
long time. Try /sbin/getty, and you may get sufficient functionality
without having to install mgetty.
Most everone
Is there any particular reason why neither buzz nor rex has recent
kernels? I got the impression that 2.0.21 was pretty rock solid.
Dermot
--
Dermot BradleyEmail: [EMAIL PROTECTED]
Communications Director Tel: +44 1232 572003
Genesis
Craig Sanders:
The bug is actually a typo. In the apache section of your .postinst
scripts you had foundhttp=yes instead of foundhttpd=yes. I.E. you
missed the final d.
That was part of the problem. 1.1.1-5 also moves the ServerRoot
and cgi-bin directories.
Anyway, fixed in dwww 1.1-2 and
Anyone using the sbpcd driver? Until last night my server at home here
(a 386/40/8) was running some mess vaguely resembling Slackware 2.3
and 3.0, and I upgraded it to Debian last night. sbpcd was compiled
in to the kernel before, but with Debian it's a module. When I go
insmod sbpcd
Christian Watts wrote:
Dear Sir or Madam,
I'm having difficulty getting debian linux installed on my computer.
It boots alright, partitions the disk, initializes the swap and root
partitions, and mounts '/' on the root partition. Then, when I insert
the first base disk (when
On Sun, 6 Oct 1996, Bill Roman wrote:
I've tried enabling the port by adding the proper entry to inittab
(working from memory at the moment) as follows:
S1:234:respawn:/etc/getty ttyS1 DT9600 vt100
Note that executables have been banished from /etc by FSSTND for a
long time. Try
Is there any possibility of someone making a deb file of the most
recent beta of SVGA Server for X (beta G). The reason I ask is that I
have a TGUI9440AGi that is not supported at all except in the recent
betas...
If someone would tell me how, I would be willing to do it.
Erv
27 matches
Mail list logo
