On Fri, Oct 24, 1997 at 07:24:12PM +, Avid El Fasih Santalla wrote:
Saludos listeros y gracias por la rapida respuesta, pero
ya he revisado que el kernel está bien seleccionado, pero no me va.
Tengo el kernel 2.2.10.
Para probarlo como tengo instaldo el kde multimedia selecciono el
Hola,
On Sun, Oct 24, 1999 at 09:25:28PM +0200, Manuel Fonseca wrote:
Hola, hace tiempo creo redordar que se iva a formar una lista de correo para
el mutt, me interesaria saber varias cosas sobre el mutt y de paso enterarme
de otras interesantes que seguramente no se que existen, sabe alguien
Hola a todos
Sabeis si ha cambiado algo en el soporte para raid en el /dev/md* ?
Es que tengo un raid 0 como particion raiz que uso sin problemas con los
kernels = 2.2.12 y con este no se logra montar.
--
Deica logo
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
BSD
Hola gente disculpen la molestia alguien tiene por alli alguna direccion para
agregar a mi source.list para bajarme el gnome, estube en la pagina de gnome
pero no encontre nada solo encontre para caldera, rh, suse y los sources
desde ya muchas
Buenas.
Puede que por la temática del emilio me tildeis de oftopiquero, pero
correré el riesgo para preguntaros:
- ¿Realmente viene Linus Torvalds al II Congreso Hispalinux?
- De aquí (Terrassa -Barna-), vamos tres personas. ¿Nos vamos a ver por el
Simo o el Congreso? ¿Sería factible hacer una
El Wed,20/Oct/1999 a las 15:46:44+0200, Lucky escribió:
Al intentar ejecutar el XAWTV me da este error:
This is xawtv-2.32, running on Linux/i586 (2.2.5-15)
sh: v4l-conf: command not found
En la distribución slink a mi me pasaba lo mismo. Me traje el original de
Hola a todos,
Me bajo de sunsite.rediris.es programas, y cuando intento hacer un cdrom no
sólo para que me lo lea Linux o BSD sino tambien Solaris, me ocurre que
todos los nombres a partir de 8 letras se cortan. Eg:
Emacs-2.4.tar.gz
Emacs-2.
Cuando lo hago, entre otras opciones pongo -R -l
Hola a todos,
Es posible que tenga que ver un servidor de correo cuya IP fija sufre un
enrutado por parte del servidor de internet. Este cada 15 minutos le intenta
lanzar el correo. Para ello, me comentan dos cosas. En el named debo poner
un registro mx con la IP fija. Y luego Sendmail con la
Hola a todos
He bajado los fuentes que he encontrado relativos a ALSA, para leer
documentacion, pero tengo muchas dudas.
La pregunta es:
si tengo el kernel 2.2.12 y una tarjeta Crystal CS 4232, ¿deberia instalar
todas estas cosas?
Realmente es que no se que es ALSA
La verdad es que las
SUSCRIBE
On lun, oct 25, 1999 at 12:55:54 -0300, [EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
BSD
Hola gente disculpen la molestia alguien tiene por alli alguna direccion para
agregar a mi source.list para bajarme el gnome, estube en la pagina de gnome
pero no encontre
On lun, oct 25, 1999 at 03:24:17 +0200, Ángel Carrasco wrote:
Me bajo de sunsite.rediris.es programas, y cuando intento hacer un cdrom no
sólo para que me lo lea Linux o BSD sino tambien Solaris, me ocurre que
todos los nombres a partir de 8 letras se cortan. Eg:
Igual digo una estupidez pero
On lun, oct 25, 1999 at 12:56:23 +0200, TooMany wrote:
Puede que por la temática del emilio me tildeis de oftopiquero, pero
correré el riesgo para preguntaros:
No pasa nada, buen rollo :)
- ¿Realmente viene Linus Torvalds al II Congreso Hispalinux?
Me alegro mucho que me hagas esa
no uso x. Ya lo siento
-Mensaje original-
De: Javier Viñuales Gutiérrez [mailto:[EMAIL PROTECTED]
Enviado el: lunes, 25 de octubre de 1999 15:41
Para: DEBIAN
Asunto: Re: MKISOFS Y LOS UNIX EN GENERAL
On lun, oct 25, 1999 at 03:24:17 +0200, Ángel Carrasco wrote:
Me bajo de
Hola, como veran sigo con el problema de asignacion de mi direccion cuando
lanzo para tratar de hacer el enlaze con mi isp. tiro aca lo que logeo el
syslog.
p.d.: eh probado lo que me han dicho de ponerle una dire local por si
este no asigna una (en el options del pppd ponerle :direccion)
Oct 25
TooMany writes:
[...]
- De aquí (Terrassa -Barna-), vamos tres personas. ¿Nos vamos a ver por el
Simo o el Congreso? ¿Sería factible hacer una quedada de debianeros?
Ya sé que durante el Congreso se van ha realizar una jornadas debianeras,
para desarrolladores, etc. Pero yo pensaba en
Oi Pessoal,
On Sat, 23 Oct 1999, [ISO-8859-1] Hélio Alexandre Lopes Loureiro wrote:
Salve Lista,
Para aumentar a divulgação da Debian-br/Debian-pt, criei os domínios
debian-br.engnux.ufsc.br e www.debian-br.engnux.ufsc.br e coloquei como
página principal a que
Eu acho a ideia boa, mas porque nao se faz esforco para se montar
um mirror Oficial da Debian? Ou entao, outro mirror oficial das Paginas da
Debian? Eu soh conheco o LinUSP no Brasil, e eu acho que ele estah ateh
sobrecarregado... Por isso, eu acho que a ideia de se fazer mais mirrors
Para entrar na lista va no site da Debian: http://www.debian.org e va na
parte de mailing list e assine a debian-user-portuguese.
Abracos,PH
Quoting Carlos ([EMAIL PROTECTED]):
Olá, pessoal,
Pequei o endereço desta lista em um site(esqueci de
jh wrote:
As you may know I have been having trouble getting my monitor set up under
x. Because of not having any documentation on the used computer that I
have, as well as not finding any info on the net about horiz and vert sync
settings for my monitor, I have been shooting in the dark
Hi, the toolbar and frame around netscape 4.71 is black and white although
the pages I view are in color. This has actually being happening for some
time starting a few netscape verions back in time. I am not exhuasting any
colormaps as all other programs started before or after are in color. Has
Well, before I left for the weekend, I had my sound working. When I
returned, my machine had apparently lost power and was sitting there at
invalid system disk because I hada floppy in the drive. Anyway, my main
partition was hosed, so I had to run fsck manually.
Next, I fired up xmms to make
Hi folks,
I wonder if such an engine (in GNU/GPL) exists?
JY
--
Jean-Yves F. Barbier [EMAIL PROTECTED]
FORTRAN is for pipe stress freaks and crystallography weenies.
Hugo van der Merwe [EMAIL PROTECTED] writes:
What is the difference between the
locales_2.1.2-5_all.deb
package file and the
locales_2.1.2-5.deb
package file? I assume packages with a _i386 extention are specifically
for the i386 architecture. That makes me think the _all
On Sun, Oct 24, 1999 at 09:28:44PM +0100, Patrick Kirk wrote:
Hi all,
Just upgraded from slink to potato and seem to be having a few mail
troubles. How can I tell if exim is running? It never shows up in pstree?
Patrick
exim is run on demand from inetd in potato, so it won't show up in
I had this problem and it turned out the card was trying to use an IRQ of 0.
Fixed it by cd-ing into the modules directory and loading each module in
turn 'til I found one that worked.
1. I upgraded Debian 1.3.1 -- 2.1, but my
kernel is still 2.0.29.
What should I do to upgrade the kernel to 2.0.36?
2. When I login as any user other than root, the system
rejects
me with the error msg:
System bootup in progress -- please wait
I incrementally killed all daemons running
On Sun, Oct 24, 1999 at 04:50:57PM +0100, Patrick Kirk wrote:
Thanks. It seems I have TWM and need someting a little more user friendly.
Enlightenment probably.
I run enlightenment. In an Eterm (or xterm), try
gnome-panel
...not sure, since I don't have the panel installed again, yet,
Like another post to this list recently(Bryan Walton w. response from
Kent West), I have a problem starting x. I have the directory /etc/X11
and a file for XF86(I did choose to install x during the dselect
process: desktop system) however, when I startx I get a fatal error and
the following:
Hello,
I'm new to perl and want to write a small perl script with a nice
userinterface. There is a wrapperscript for /usr/bin/dialog,
but it gives the following warning:
Use of implicit split to @_ is deprecated at ./dialog.pl line 34.
I'm using potato with perl-5.005.
What is the correct
On Sun, Oct 24, 1999 at 09:28:44PM +0100, Patrick Kirk wrote:
Just upgraded from slink to potato and seem to be having a few mail
troubles. How can I tell if exim is running? It never shows up in pstree?
Telnet to port 25 on the local machine. If you get a banner message
from Exim, it's
A long time ago, in a galaxy far, far way, someone said...
I have to switch from static ipadress to dhcp. I installed dhcp
clientpackages but my system still uses the static ip adress. How do I
properly remove this and which packages do I have to uninstall?
You don't need to uninstall
J Horacio MG ([EMAIL PROTECTED]) wrote:
ldconfig: warning: can't open /usr/lib/libBrokenLocale.so (No such file
or directory), skipping
ldconfig: warning: can't open /usr/lib/libcrypt.so (No such file or
directory), skipping
[...]
You've updated the base shared libraries but not the
On Sun, Oct 24, 1999 at 10:38:15PM +0100, Patrick Kirk wrote:
1. eximconfig -i seems to start exim. How do I stop it and restart it?
pstree shows no exim.
If exim is being run from inetd it won't be a continually running
process but instead will only be started when something actually wants
Hi all.
I've been having trouble FTPing to my Debian box over my LAN for a while
now. Here's what happens:
Problem 1) I can't FTP as root, and I understand why. But one (and only
one) of
my users is also unable to FTP there, getting the same error message as when I
try as root. That user is not
Hi all,
I'm trying to configure fetchmail to retrieve my mail from my pop3
server.
However, something goes wrong when fetchmail tries to send retrieved
messages to my SMTP port.
Fetchmail send a messages like : SMTP connection failed
I checked if I can telnet my SMTP port and I can't.
--
On Sun, 24 Oct 1999, Daniel Lesage wrote:
: Hi all.
:
: I've been having trouble FTPing to my Debian box over my LAN for a while
: now. Here's what happens:
:
: Problem 1) I can't FTP as root, and I understand why. But one (and only
: one) of
: my users is also unable to FTP there,
Hello Aaron,
On Sunday, October 24, 1999, you wrote:
AVC Hi all -
AVC I'm doing some superhero work here, rescuing fellow students from the
AVC Gates of hell and introducing them to sweet, brand GNU, true freedom.
AVC Trouble is, on this one machine I can't get the NIC driver to load :(.
I believe this results from when you upgrade your
kernel from the older series to the 2.2.x series.
The older kernels had a Route command which is used
in various startup scripts, but the newer series
is smarter and no longer requires the route command
so it doesn't exist. These error
In linux.debian.user, you wrote:
Hi all,
Just upgraded from slink to potato and seem to be having a few mail
troubles. How can I tell if exim is running? It never shows up in pstree?
Patrick
Also.. when you upgraded exim, you should have seen an install message
telling you that the format of
Art Lemasters ([EMAIL PROTECTED]) wrote:
/etc/resolve.conf
Should be `/etc/resolv.conf'.
--
Greg Wooledge| Truth belongs to everybody.
[EMAIL PROTECTED] | Red Hot Chili Peppers,
http://www.kellnet.com/wooledge/ |
pgp52KUvPIhOT.pgp
Description: PGP signature
[EMAIL PROTECTED] ([EMAIL PROTECTED]) wrote:
2. When I login as any user other than root, the system rejects
me with the error msg:
System bootup in progress -- please wait
rm /etc/nologin
Then try to find out why the nologin file was left lying around
--
Greg Wooledge
Olaf Conradi ([EMAIL PROTECTED]) wrote:
Use of implicit split to @_ is deprecated at ./dialog.pl line 34.
$message_len = split(/^/, $message);# -- line 34
Split normally returns an array, not a scalar... unless I'm missing something.
(I'm no perl guru.)
--
Greg Wooledge
I believe that installing the deb of the kernel-image 2.0.36 will get you to
2.0.36.
As for the boot question, i do not know. Perhaps you should wait a bit more ?
---BeginMessage---
1. I upgraded Debian 1.3.1 -- 2.1, but my
kernel is still 2.0.29.
What should I do to upgrade the kernel to
From: Pann McCuaig [EMAIL PROTECTED]
On Fri, Oct 22, 1999 at 21:28, Daniel Barclay wrote:
No, no, no. Netscape can be just as horribly unstable on glibc 2.0
systems. I know. I suffer from it every day.
I hate to rain on your parade, but LOTS of people run Netscape 4.5 and
4.6
I seem to remember this being a known bug with running Netscape in X @ 24-bit
color.
Supposedly changing the color depth to 32 or 16-bits or less will keep that from
happening. I could be wrong, but it might be worth a try.
Sean
Colin Telmer wrote:
Hi, the toolbar and frame around netscape
-BEGIN PGP SIGNED MESSAGE-
On Sun, 24 Oct 1999 [EMAIL PROTECTED] wrote:
1. I upgraded Debian 1.3.1 -- 2.1, but my kernel is still 2.0.29.
What should I do to upgrade the kernel to 2.0.36?
If you have apt, apt-get install kernel-image-2.0.36
If you don't have apt, you can download the
Attempting install of slink
AMD K-5 PR-166, 49152K ram
Install media on CD
After [I]nstall begins, a message appears on screen:
...
Scanning available packages...Cannot open /var/lib/dpkg
/methods/multicd/available: No such file or directory.
installation script returned error exit status 1.
...
Hello,
I have noticed that when I create a boot floppy with make zdisk
it will boot, but when using make bzdisk it will not. I had to
use the tecra rescue and driver disks when installing, and
I wonder if this is somehow related to the IBM Thinkpad 560.
Or, is there something else going on in
-BEGIN PGP SIGNED MESSAGE-
On Sun, 24 Oct 1999, Harlan Crystal wrote:
I believe this results from when you upgrade your
kernel from the older series to the 2.2.x series.
The older kernels had a Route command which is used
in various startup scripts, but the newer series
is
I messed something up but don't know how to fix it. I installed ntpdate,
then accidentally removed it, then tried to re-install it, and this is the
error I get:
update-rc.d: /etc/init.d/ntpdate: file does not exist
/var/lib/dpkg/info/ntpdate.postinst: /etc/init.d/ntpdate: No such file or
Any info, or pointers to it would be helpful,
Hi. Here's some info that may help you. Instead of using make zImage try the
following:
dd if=/usr/src/linux/arch/i386/boot/bzImage of=/dev/fd0 bs=18k
rdev /dev/fd0 /dev/hdXX
Where XX is the name of your main linux partition. Let me know if that
On 25-Oct-99 John Miskinis wrote:
Hello,
I have noticed that when I create a boot floppy with make zdisk
it will boot, but when using make bzdisk it will not. I had to
use the tecra rescue and driver disks when installing, and
I wonder if this is somehow related to the IBM Thinkpad 560.
Just my $ 0.02.
Use xf86config. I like it more than tha xf86setup. Use the most generic
freqs. It always works.
The reason I started to use xf86config was that I was using a lousy
no-name cheap cheap b/w monitor from an Indian company that had gone out
of business. And believe me, I was pleased
raymond ferrari wrote:
Like another post to this list recently(Bryan Walton w. response from
Kent West), I have a problem starting x. I have the directory /etc/X11
and a file for XF86(I did choose to install x during the dselect
process: desktop system) however, when I startx I get a fatal
If you need to look at splitting an ext2 partition. Have a look at
ext2resize. It seems to work for me, but MAKE SURE YOU DON'T HAVE YOUR
FILESYSTEM MOUNTED READ-WRITE, OR IT WILL GET CORRUPTED IRREVOCABLY.
Other than that, it works great for me.
On Sat, Oct 23, 1999 at 12:58:35PM -0500, James
Debian is a nonprofit organisation. It costs them (and therefore us) to
distribute messages. Therefore, please do not use our mailing lists to
test your mail system.
Thank you
On Sat, Oct 23, 1999 at 03:23:54PM -0700, Wim Kerkhoff wrote:
You shouldn't be reading this!
--
I already have all
I use that for the german mirror - as you see. I think ftp.debian.org should
also work.
Nope. ftp.debian.org is in the US.
--
I already have all the latest software.
-- Laura Winslow, Family Matters
Dwayne C. Litzenberger - [EMAIL PROTECTED]
Advertising Policy:
X3
/etc/chatscripts/provider (or whatever)
change:
OK ATDT555-1212
to
OK ATX3DT555-1212
(as appropriate)
On Sun, Oct 24, 1999 at 01:28:14PM -0700, Christopher R. Barry wrote:
If your line is beeping due to messages in your message box, what
modem init string due you use to force the
On Sun, Oct 24, 1999 at 09:52:59PM -0600, Dwayne C . Litzenberger wrote:
If you need to look at splitting an ext2 partition. Have a look at
ext2resize. It seems to work for me, but MAKE SURE YOU DON'T HAVE YOUR
FILESYSTEM MOUNTED READ-WRITE, OR IT WILL GET CORRUPTED IRREVOCABLY.
Could you
On Sun, Oct 24, 1999 at 16:17, Daniel Barclay wrote:
You might not be using Netscape extensively enough to trigger the bugs.
Maybe usage pattern differences are something to explore.
Do you (and others):
- - have Java enabled?
Yup.
- - have Javascript enabled?
Yup.
- - typically open
I just did
apt-get update
apt-get install rpm
rpm -i Device3Dfx-2.2-3.src.rpm
And got rpm: error in loading shared libraries: libbz2.so.0.1: cannot
open shared object file: No such file or directory
Did a locate libbz2.so, found nothing. Did a search for packages
containing libbz2.so at
I want to thank the list for all the help and advice you have been giving
me. I am the one who has been trying to run xf86config to set up x-windows.
As you may know I do not have any specs for my monitor, and every time I
would run xf86config I would get a scrambled screen. During my probably
-BEGIN PGP SIGNED MESSAGE-
On Mon, 25 Oct 1999, Olaf Conradi wrote:
Use of implicit split to @_ is deprecated at ./dialog.pl line 34.
$message_len = split(/^/, $message);# -- line 34
split always splits to an array. Here, you're trying to get the number of
elements
For a count of elements in an array
$count = $#array;
--
++
| Eric G. Milleregm2@jps.net |
| GnuPG public key: http://www.jps.net/egm2/gpg.asc |
++
-BEGIN PGP SIGNED MESSAGE-
On Sun, 24 Oct 1999, Pann McCuaig wrote:
On Sun, Oct 24, 1999 at 16:17, Daniel Barclay wrote:
[[[snip]]]
- - open a lot of windows using open in new window (middle mouse button)?
Nope.
[[[snip]]]
How many Netscape windows is it useful to have open at
Hi,
I need gmp2 to compile some software. I went to the Debian pages and
found that the package I need are to be found under devel. Then I tried
to run dselect, but gmp2-dev was not not be found. I went back to the
web and tried to download from there, but the deb's are not available.
What
looks like the driver for the card isnt loaded.
nate
[mailto:[EMAIL PROTECTED] ]--
Linux System Administrator http://www.firetrail.com/
Firetrail Internet Services Limited http://www.aphroland.org/
Everett, WA 425-348-7336
you may not be able to get sound because there is not enough free memory
below 16MB for the dma buffer.
in more recent 2.2.x kernels you gotta enable the persistant DMA buffers
in sound config and it will reserve the memory at boot. it may not solve
this problem, but its an idea :)
nate
to override that delete the links to nologin in /etc/rc2.d
althnough its best to see whats hanging the machine at boot.
[mailto:[EMAIL PROTECTED] ]--
Linux System Administrator http://www.firetrail.com/
Firetrail Internet Services Limited
some ftp daemons check to see if the user has a valid login shell before
allowing a ftp login. check /etc/shells to see if that user's shell is
listed.
nate
[mailto:[EMAIL PROTECTED] ]--
Linux System Administrator http://www.firetrail.com/
i read a while back(year?) that the multicd support in dselect was rather
broken(i've never had a reason to use it) try using plain cdrom as the
access point rather the multicd
nate
[mailto:[EMAIL PROTECTED] ]--
Linux System Administrator
Pann McCuaig wrote:
On Sun, Oct 24, 1999 at 16:17, Daniel Barclay wrote:
You might not be using Netscape extensively enough to trigger the bugs.
Maybe usage pattern differences are something to explore.
Do you (and others):
- - have Java enabled?
Yup.
- - have Javascript enabled?
Well-
I am running slink (2.1) on a thinkpad laptop. I use a docking station with a
scsi card and cdrom to install, and wanted to add a couple of packages.
I have done this before without difficulty, but this time I cannot get to the
cdrom as scd0 or cdrom on mnt or dev.
There is nothing in
Dirk Lother wrote:
I'm looking for a way to access an NT Server with a floppy Linux in
order to save data from broken down NT clients.
Could you think of a way to do that ?
The easiest way would be accessing the hardware; ie: removing the
harddisk and mount it on your Linux (Linux can
Jake Griesbach wrote:
I'm trying to boot from the Debian rescue disk to install linux for the
first time. I have an adaptec AIC-7890 scsi card, so I was typing
linux aix7xxx
to boot.
After the kernel loads, I get the following after the scsi driver loads:
...
Kernel panic: VFS:
On Mon, Oct 25, 1999 at 12:13:01AM -0500, Kent West wrote:
I use Communicator, not just Navigator; perhaps that's the clue.
The test that Daniel suggested crashed my Netscape. I've tried
running with and without Java/Javascript. I can expect Netscape
to crash at least once every time I sit
Hi,
I have successfully installed debian on my Sun Classic using floppies;
the base system up 'till now. My question is: how do you configure the
keyboard? The keyboard says that it is a model-5.
I use the sunkeymap (not sure, but it is the US-English one) keyboard
setting, but it doesn't work.
What does restarting inetd do?
reloads the inetd.conf file...
On Mon, Oct 25, 1999 at 07:34:07AM +0100, Patrick Kirk wrote:
What does restarting inetd do?
--
Please cc all mailing list replies to me, also.
=
* http://benham.net/index.html
Folks,
I am replacing a CISCO router with a Linux box running 2.0.34. I have
an Emerging Technologies Card, which connects to the V.35 modem my ISP
gave. The machine refuses to forward packets accross interfaces.
My configuration:
Linux earth 2.0.34 #19 Sun Oct 17 17:03:59 IST 1999 i586
I got binary distribution of Netscape Communicator 4.61 version for Linux 2.0,
export encription standard from ftp.netscape.com.
I installed it on my Debian 2.1 system. Everything seemed to be fine with
installation until I tried to run ./netscape.
The first problem I got was that netscape can't
On Sun, Oct 24, 1999 at 23:58:54 -0500, Christian Dysthe wrote:
What gives?
They've been renamed to 'libgmp2' and 'libgmp2-dev'.
HTH,
Ray
--
Obsig: developing a new sig
On Sun, Oct 24, 1999 at 11:58:54PM -0500, Christian Dysthe wrote:
Hi,
I need gmp2 to compile some software. I went to the Debian pages and
found that the package I need are to be found under devel. Then I tried
to run dselect, but gmp2-dev was not not be found. I went back to the
web and
On Mon, Oct 25, 1999 at 12:39:04AM -0400, Darxus wrote:
I just did
apt-get update
apt-get install rpm
rpm -i Device3Dfx-2.2-3.src.rpm
And got rpm: error in loading shared libraries: libbz2.so.0.1: cannot
open shared object file: No such file or directory
Did a locate libbz2.so,
On Sun, 24 Oct 1999, Eric G . Miller wrote:
For a count of elements in an array
$count = $#array;
^
this is the subscript of the last element in array, one less than
the length, since there is a 0th element;
$count++; # number of elements in array @array;
you could also
Hi!
Someone please tell me, if I want to use a Diskless clients (p200 with
64 MB ram) and a strong server and 10 Mb ethernet cards, how will run
the StarOffice 5.1 on the clients??
Have anyone any experience with this??
--
Best regards!
| Debian GNU/Linux Potato
Hi again!
I've a short question:
If I download a tar.gz file and if I want to compile it, can I make from
the source a deb package? Because If I install it from the source I
can't purge it, not? But If I can make a deb from the source i can
remove it with the dpkg. Have any solution?
--
Best
On Mon, 25 Oct 1999 01:36:18 -0700 (PDT), George Bonser [EMAIL PROTECTED]
wrote:
Well, I THINK it is modutils that is causing the problem. Two machines,
both upgraded yesterday. Now neither one can properly depmod. All modules
report unresolved symbols and refuse to load.
NOTE this only
Unfortunately, there was an incompatible API change in the new version of
lesstif so all the packages that were compiled with lesstifg will have to
be recompiled with the new lesstif1 package. Some maintainers have
updated their packages faster than others. If there isn't one already,
you should
Hi!
Someone tell me how can I find a doc about C programing (I downloaded
the Programmer's Guide, but I can't programming under C, so I want to
learn it!)
So I need a doc for lammers!
Thx the help!
Sorry about offtopic!
--
Best regards!
| Debian GNU/Linux Potato
My system clock has been keeping time rather poorly. The
hardware-clock on the other hand hasn't lost a second in
over two months.
I tried to use adjtimex to get the system clock to match the
hardware clock, unsuccessfully. First i tried adjtimex --adjust
resulting in the system clock losing
I have the same problem. I upgraded my potato machine yesterday. I had a bunch
of unresolved symbols. I did a update-modules. Now my machine is complaining
about /etc/modules.conf being older than /lib/modules/2.2.5/modules.dep.
Somehow, the depmod -a from init.d script seems to be not writing
Hi Jerry,
I used moved from slink to potato as well. Is there a howto on how to get
and compile a 2.2 kernel?
Thanks in advance,
Patrick
Hi,
On Mon, Oct 25, 1999 at 01:30:34PM +0200, Benak Istvan wrote:
Someone tell me how can I find a doc about C programing (I downloaded
the Programmer's Guide, but I can't programming under C, so I want to
learn it!)
So I need a doc for lammers!
How 'bout Kerninghan, Ritchie: The C
On Mon, 25 Oct 1999 13:43:22 +0100, Patrick Kirk [EMAIL PROTECTED] wrote:
Hi Jerry,
I used moved from slink to potato as well. Is there a howto on how to get
and compile a 2.2 kernel?
Not realy, there is HOWTO's on the basic things about compileing the kernel.
Check you /usr/doc/HOWTO and it
Many thanks!
Hi,
Suddenly my apache server (Slink) stopped asking for
authentication with .htaccess files.
Any hint what could be going wrong here? I have no idea since this
was working ok.
Thanks,
[]s,
Mario O.de MenezesMany are the plans in a man's heart, but
On Mon, Oct 25, 1999 at 12:18:34PM +0200, Benak Istvan wrote:
Hi again!
I've a short question:
If I download a tar.gz file and if I want to compile it, can I make from
the source a deb package? Because If I install it from the source I
can't purge it, not? But If I can make a deb from the
On Sat, 23 Oct 1999, John wrote:
Fortunately my car runs without software, i wouldnt go near it otherwise :)
Hi John
However, unless your car is very old (before early 1970s) your car
has a computer, and software, in it that does ignition timing at the
very least.
On my car, the computer
1 - 100 of 153 matches
Mail list logo
