On Sat, Nov 25, 2000 at 01:44:29PM +, Phillip Deackes wrote:
> > I want to dump a list of the packages I have installed on a current
> > potatoe installto a file, so I can later build a machine with the same
> > packages? How do I do this?
> >
>
> Easy. Just do 'dpkg -l > filename'
No, I don
using the prebuilt 2.2.18 kernel package, sound on a Via 82c686a
chipset sounds fine. Previous to 2.2.18, I was using ALSA - I removed
it when 2.2.18 added PCI 82c686 support.
With 2.4.0-pre8 through 11 the sound has clicks and pops.
Can anyone suggest how to go about finding the problem without
I just installed Debian 2.2 and compiled the 2.2.17 kernel on a 3.2 gig
Quantum Fireball EX. The drive is a slave on the primary IDE cable and
both drives are jumpered correctly. I did bad block scans when
initializing all partitions and nothing bad came up. This is the error:
Starting deferred ex
I'm using a handspring visor, which I have set up using a serial docking
cradle. I've also got a usb cradle and I would like to try and configure
my system to use it. My serial port cradle is /dev/ttyS0 which is
symlinked to /dev/Pilot. What are the standard tty names for USB? I'm
using a fairly ne
Hello,
I am running Debian 2.2 (stable) plus some helix-gnome stuff. I want to
use setxkbmap to switch the keyboard mapping but always get the
following error:
# setxkbmap
Couldn't interpret _XKB_RULES_NAMES property
What does this mean? Any ideas on how to fix it?
--
Pedro
* Neil Booth <[EMAIL PROTECTED]> [251100 21:42]:
> I get these messages trying to install recent versions of debconf:
>
> monkey:/usr/src/gcc/build# dpkg -i
> /var/cache/apt/archives/debconf_0.5.22_i386.deb
> (Reading database ... 36741 files and directories currently installed.)
> Preparing to re
[EMAIL PROTECTED] wrote:
> On Fri, Nov 17, 2000 at 09:22:54AM -0500, Andrew Dwight Dixon wrote:
> > Hi All,
> > I'm an old-school fvwm fan but I recently decided to try gnome and kde
> > because I told my sister I'd help her install Linux and she'll
> > definitely want to use one or the other. An
hi all
Can anyone tell me a reliable way to make a boot disk? I've tried the
mkboot util, and I have to say it's pretty average - it hasn't
successfully booted a disk, only get's to:
"LILO boot:
Loading linux"
and dies ... I'm pretty sure there's a way to make a boot disk with dd,
but can't reme
Thanks to a swift response, my problem was solved--apparently I just
needed to symlink /usr/include/asm to /usr/src/linux/include/asm-i386
Though I wonder what made me suddenly need the symlink, if I didn't have
it before, or what made me lose it if I did have it before. (I notice I
did already h
Hi,
You should be able to find your card on this website:
http://stm.lbl.gov/comedi/
Shao.
Matthias M?ller [EMAIL PROTECTED] wrote:
> A german company offers a lot PCI-cards with differnet functionalaty.
>
> http://www.kolter.de/home_engl.htm
>
> good luck
> Matthias
>
> * Samuel Tardieu
On Sat, 25 Nov 2000, S.Salman Ahmed wrote:
> I am using the latest (stable) release of PuTTY on Win2000 Professional
> to connect to a Debian server running OpenSSH. I have also installed
> Hummingbird Exceed 6.2 on the Win2000 machine.
>
> It seems that PuTTY doesn't support X forwarding. So how
Since dist-upgrading to the most recent Woody packages, I have been
unable to compile a kernel. Both the 2.2.17 kernels and 2.4.0test10
kernels abort with the same error.
I can't think of anything else that could be the problem, outside of the
recent dist-upgrade, because I have already compiled
Hullo,
It seems that Spruce is not willing to GPG sign an email, despite its settings
which think that it is doing so. I'm using spruce 0.7.4 from woody. I have
spruce set up to store my passphrase, and always sign. I'm really not sure if
i'm doing something wrong, or if there's some bug in Spr
Hi all,
I was hoping somebody could translate the following bootup message for
me:
parport0: detected irq 7; use procfs to enable interrupt-driven
operation.
What would I do with 'procfs'? Could the fact that I don't have
'interrupt-driven operation' enabled be the cause of my print-spoo
Hi all,
Somehow 2.4test11 doesn't recognize my cdrom.
Strange, but that is how it appears to me. It's a 52x Creative Labs cdrom.
When I mount it, I get no errors, but when accessing the drive, there's nothing
there. But it really truly is mounted!
I re-compiled the kernel four times now, and it
Have you tried copydir from the mirrodir package?
Regards,
/Karl
---
Karl HammarAspö Data [EMAIL PROTECTED]
Lilla Aspö 2340 +46 173 140 57Networks
S-742 94 Östhamm
On Sat, Nov 25, 2000 at 05:01:29PM -0500, Debian Ghost wrote:
> Thank you for the reply.
> So samba is the only way to "mount" an NT filesystem? Sounds good...
> Do I need to run a samba server on the linux machine or would the server
> be an application on the NT machine. I went to samba.org/samba
On Sat, Nov 25, 2000 at 11:20:56PM +0100, Johan Ur Riise wrote:
> got the resolutions sorted out with the addition the Modes-line
> in XF86Config-4:
>
> SubSection "Display"
> Depth 24
> Modes "1280x1024" "1152x864" "1024x768" "800x600"
> EndSubSection
>
> Now I have to
got the resolutions sorted out with the addition the Modes-line
in XF86Config-4:
SubSection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "800x600"
EndSubSection
Now I have to specify the correct keyboard (norwegian)
--
Johan Ur Riise
90 15 77 78
You do not need to run a samba server to mount filesystems on your Linux
box from NT via samba
At 17:01 2000-11-25 -0500, Debian Ghost wrote:
Thank you for the reply.
So samba is the only way to "mount" an NT filesystem? Sounds good...
Do I need to run a samba server on the linux machine or wo
There is some NFS products for NT
At 16:37 2000-11-25 -0500, Jonathan D. Proulx wrote:
Hi,
AFAIK if the files are on an NT server your only option is samba,
although if you really wanted to get weird you could use appletalk
wich both NT and GNU/Linux (via netatalk) can speak
-Jon
--
To UNSUB
Thank you for the reply.
So samba is the only way to "mount" an NT filesystem? Sounds good...
Do I need to run a samba server on the linux machine or would the server
be an application on the NT machine. I went to samba.org/samba to read the
FAQs and I'm still a little confused as to what I do to g
On Sat, Nov 25, 2000 at 09:25:12AM -0800, John Bagdanoff wrote:
> > defaultcolordepth in the file, resolution is next to go.
> If it's not /etc/X/XF86Config-4 then you're not there yet.
>
> I think you have some packages missing. How about:
> xutils
got that one.
--
Johan Ur Riise
90 15 77 78
On Sat, 25 Nov 2000, J.H.M. Dassen (Ray) wrote:
> On Fri, Nov 24, 2000 at 12:19:59 -0200, Mario Olimpio de Menezes wrote:
> > At the installation section, they mention a docbook-utils rpm
> > package which contains some shell scripts and perl utilities, such as:
> > docbook2html, docbook2ps, d
Hi,
AFAIK if the files are on an NT server your only option is samba,
although if you really wanted to get weird you could use appletalk
wich both NT and GNU/Linux (via netatalk) can speak
-Jon
Passing -lm to gcc helped. Thanks to everybody who quickly helped me
out.
:)
--
Viktor Rosenfeld
E-Mail: mailto:[EMAIL PROTECTED]
HertzSCHLAG:http://www.informatik.hu-berlin.de/~rosenfel/hs/
Hello,
I'm trying to pin down some weird bugs from kde2 and a post from the
debian-kde list prompted me to look at my own system. it really boils
down to the qt libs I currently have installed and I would welcome
advice:
ii libqt1g1.45-1.1 Shared Library used by applications li
On Nov 25 2000, Chris Niekel wrote:
> Anyone knows how to solve this? Is there any documentation I should have
> been reading? apt-get dist-upgrade didn't tell me about this, nor sent it
> mail.
apt-get --reinstall install xfonts-base
did the trick for me.
[]s, Roger...
On Nov 24 2000, Ethan Benson wrote:
> yes, downloading .debs is not the right way to manage a debian
> system
Indeed, that's not the easiest/best way.
But now that he has already downloaded a bunch of files, he
can save some effort (especially if he is using a modem) and
In what order did you load the packages?
Maybe g-brief overwrites your settings, if it's loades after fancyhdr.
Thorsten
On 24-Nov-2000 Manuel Hendel wrote:
> On Thu, Nov 23, 2000 at 08:42:05AM -0800, Eric G . Miller wrote:
>> Date: Thu, 23 Nov 2000 08:42:05 -0800
>> From: "Eric G . Miller"
>>
This is a potato system kept up to date with the most recent additions
to proposed-updates, and security.
In an effort to solve a problem I have with Sawmill menus, I tried to
install the package libgtk1.2-dev, but got the response below:
-
Hey Guys,
I was wondering what would be better to use in this situation.
I want to basically be able to have read access to a particular LAN device
on which the files are on a NT server and the client(s) that I want to be
able to read files (mostly spreadsheets *.xls) that change daily. So I
guess
On Thursday 23 November 2000 13:38, Manuel Reiter wrote:
> On Thu, 23 Nov 2000, Daniel Borgmann wrote:
> > well, thanks.. the problem is how to get X running with potato?
> > i don't want to tell my father to install woody.
> > i guess he will compile xfree 4 on his own if there is no other solutio
On Saturday 25 November 2000 04:36, Viktor Rosenfeld wrote:
>
> Anybody who can help me, getting sqrt() to work? Or is my code
> incorrect?
$ gcc -o test test.c -lm
- Davide
On Sat, Nov 25, 2000 at 18:36:56 +0100, Viktor Rosenfeld wrote:
> This is the output I get by gcc:
>
> 18:29 [EMAIL PROTECTED]:~/Projekte/c/2 $ gcc -o test test.c
> /tmp/ccc01936: In function `main':
> /tmp/ccc01936(.text+0x17): undefined reference to `sqrt'
> /tmp/ccc01936
Hi folks,
I'm trying to learn C using the K&R book. I wrote the following code to
test something they are mentioning in chapter 2.7, but I can't compile
it.
#include
#include
int main(int argc, char argv[])
{
int i = 4;
printf("I
On Sat, Nov 25, 2000 at 09:12:08 +0100, Chris Niekel wrote:
> I recently did un upgrade to X 4.0.1, and now my Xserver doesn't want to
> start any more. It first complained about font 'fixed' not being available,
This is often caused by having a fontserver specified which isn't
available/running.
On Fri, Nov 24, 2000 at 12:19:59 -0200, Mario Olimpio de Menezes wrote:
> At the installation section, they mention a docbook-utils rpm
> package which contains some shell scripts and perl utilities, such as:
> docbook2html, docbook2ps, docbook2pdf, etc.
> Does somebody know where to f
On Fri, Nov 24, 2000 at 15:24:07 +0100, Daniel Reuter wrote:
> lprng runs the inputfilters by default on the host on which the job is
> issued, and NOT on the server with the printer attached. That means the
> host has to do the work of rendering anything, the server lprng just
> forwards the job d
Hi, I'm trying to install the snap font of blackbox fame for use with gnome and
sawfish. The file is snap.pcf. I don't know that much about fonts, but I've
tried putting the file in each of /usr/lib/X11/fonts/100dpi,
/usr/lib/X11/fonts/75dpi, /usr/lib/X11/fonts/misc. After putting it in each dir
I get these messages trying to install recent versions of debconf:
monkey:/usr/src/gcc/build# dpkg -i
/var/cache/apt/archives/debconf_0.5.22_i386.deb
(Reading database ... 36741 files and directories currently installed.)
Preparing to replace debconf 0.5.25 (using .../debconf_0.5.22_i386.deb) ...
On Sat, 25 Nov 2000 19:54:06 +0100, Peter O. Fedichev said:
>
> Hello,
>
> I have installed Debian linux both on my laptop and the desktop. I am
> using the both of the computers to login to my university Computer
> Center which serves as an isp for its employees. I am using one and the
>
that is one thing. The other is that every nfs server can be used too.
bis bald, Rolf
On Sat, 25 Nov 2000, tjm wrote:
> Look here:
>
>
> http://www.eecis.udel.edu/~mills/ntp/servers.html
>
>
>
> Bruno Boettcher wrote:
> >
> > hello,
> > i am searching for some hosts for time updating
Look here:
http://www.eecis.udel.edu/~mills/ntp/servers.html
Bruno Boettcher wrote:
>
> hello,
> i am searching for some hosts for time updating of my hosts
> where can i find the listings of hosts offering this service?
> i am in France BTW, so any host network-near Strasbourg wo
On Sat, Nov 25, 2000 at 09:22:09AM -0500, Debian Ghost wrote:
> Hey Guys,
> I was wondering what may be causing my logcheck to report every time a
> cron session is opened / closed via root. The weird thing is that root has
> no user crontab file. Would this be talking about /etc/crontab and
> cron
Hello,
I have installed Debian linux both on my laptop and the desktop. I am
using the both of the computers to login to my university Computer
Center which serves as an isp for its employees. I am using one and the
same external modem and have the following problem:
I am using wvdial and if I
On Sat, Nov 25, 2000 at 05:48:26PM +0100, Johan Ur Riise wrote:
> On Sat, Nov 25, 2000 at 08:38:13AM -0800, John Bagdanoff wrote:
> >
> > See if you have xserver-xfree86 installed.
> I have now, but I had to install it manually
Why manually? You don't use apt-get? If you are using apt-get
instal
I asked this question a while ago, and I've seen it appear twice
since. So, to set answer that question, it works fine with my debian
woody installation. First, with my particular laptop, I had to enable
the serial port in the bios. I intend to eventually apply the usb back
port, but I have too m
Do this and be very carefull.
Take a look at your /etc/apt/sources.list add a line for unstable. Do a apt-get
update then do a apt-get install sndconfig. Then do not wait do not pass go do
not collect $200 comment out the unstable line from your sources. Then do a
apt-get update and press on. Ye
If you decide to go SCSI, get 2 SCSI cards: 1 for your SCSI hard drives,
and 1 for other SCSI devices like CD-ROM drives, tape drives, etcetera.
It would also be advisable to replace any IDE device you have with a SCSI,
USB, or firewire device if possible.
There are plenty of good SCSI host adapte
On Sat, Nov 25, 2000 at 08:38:13AM -0800, John Bagdanoff wrote:
>
> See if you have xserver-xfree86 installed.
I have now, but I had to install it manually
>
> If not, then:
> apt-get install xserver-xfree86
>
> Then run dexter
dexter will not run,
dexter: unknown X server (X) detected!
but I r
Hi,
I've got a YAMAHA YMF715 sound chip on my mother board
and I used to drive it with OPL3 SAx2 when I used Corel
Linux. Now I'm using Debian 2.2 but I can't find the
sndconfig tool I had in Corel. Apt-get couldn't fetch
package sndconfig.
I've looked into the mail-list archive and in Feb 2000
On Sat, Nov 25, 2000 at 11:58:40AM +0100, Johan Ur Riise wrote:
> My X will not start neither with xdm nor startx.
> Here is the output from
> X -probeonly 2>x
> I have not configured X again after this weeks upgrades,
> should I?
>
> This is a pre-release version of XFree86, and is not supported
urbanyon <[EMAIL PROTECTED]> writes:
> have you tried mounting it with vfat support? sorry i don't have the
> command right now (newbie, me), but i'll look through my notes and send it
> along (assuming somebody doesn't get to it before i do!).
The problem was with the Joliet support. I had it
have you tried mounting it with vfat support? sorry i don't have the
command right now (newbie, me), but i'll look through my notes and send it
along (assuming somebody doesn't get to it before i do!).
On 24 Nov 2000, Arcady Genkin wrote:
> All of a sudden when I mount a CD-ROM the long filename
what NIC do you have that works?
On Wed, 22 Nov 2000, Kevin Krafthefer wrote:
> Hello,
>
> I am adding sound to my debian machine and have had bad luck so far*.
> Could those of you fine list subscribers that have had a positive,
> enriching experience with installing and using your sound card o
>
> Your problem is here:
>
> > 89 IN PTR sacred-key.org
> ^^
> Try putting a dot (.) after that:
>
THANK YOU!!! I have all forgotten the warnings about the dots. Now I will
never forget it again.
But there is only one other
On Fri, Nov 24, 2000 at 10:28:12PM -0800, Sean 'Shaleh' Perry wrote:
> > There's a bug filed against the doc-debian package, including the Debian
> > FAQ, about not having good backup instructions for users (admins). See
> > http://bugs.debian.org/69197 for details.
> >
> > Can someone please sugg
On Sat, Nov 25, 2000 at 03:13:14PM +0100, Johan Ur Riise wrote:
> On Sat, Nov 25, 2000 at 11:58:40AM +0100, Johan Ur Riise wrote:
> > My X will not start neither with xdm nor startx.
> Someone told me I have to run dexter, which says:
>
> dexter: unknown X server (X) detected!
I did a XFree86 -con
"Jason Holland" <[EMAIL PROTECTED]> writes:
> It looks like the vfat partition type is not supported by the kernel your
> running. Are you using modules?? If so, try loading it before you try and
> mount the partition.
You could also cat /proc/filesystems to see which filesystems
(drivers) can
> Dave Bacon wrote:
>
> > Hello,
> >
> > I have just upgraded quite a few packages with dselect. And now when I
> > run "startx" I receive the following error messages. Can you help?
> >
> >
> >
> > var: allowed
Daniel de los Reyes wrote:
> On Sáb 25 Nov 2000 07:19, Rogelio E. Castillo Haro wrote:
> > Hi,
> > I use CUPS and I configure my Deskjet 840C. I print perfectly from any
> > application, but from staroffice I can't print to it.
> >
> > Why? Someone has any idea about it?
> >
> > Is because Staroff
Hey Guys,
I was wondering what may be causing my logcheck to report every time a
cron session is opened / closed via root. The weird thing is that root has
no user crontab file. Would this be talking about /etc/crontab and
cron.daily / monthly ? I'm not sure what else it could be.
Give the Ghost s
On Sat, Nov 25, 2000 at 11:58:40AM +0100, Johan Ur Riise wrote:
> My X will not start neither with xdm nor startx.
Someone told me I have to run dexter, which says:
dexter: unknown X server (X) detected!
I do have an xserver and /etc/X11/X is a link to
/usr/bin/X11/XFree86
X -version says:
XFree
On 25/11/2000 at 14:31 +0100, Sebastiaan wrote:
> sacred-key.org nameserver = ns.sacred-key.org.sacred-key.org
^^^
> sacred-key.org preference = 10, mx = mail.sacred-key.org.sacred-key.org
> I want to dump a list of the packages I have installed on a current
> potatoe installto a file, so I can later build a machine with the same
> packages? How do I do this?
>
Easy. Just do 'dpkg -l > filename'
--
Phillip Deackes
Using Storm Linux 2000
Hello,
I am trying to setup a dns server but I am having some trouble. I have
registered a domain name sacred-key.org and linked it to my dns server,
which has a domain name from my provider, called jon.planet.nl.
I have installed bind and set up the scripts, but until now I have not
been succeeded
A german company offers a lot PCI-cards with differnet functionalaty.
http://www.kolter.de/home_engl.htm
good luck
Matthias
* Samuel Tardieu <[EMAIL PROTECTED]> [001125 12:41]:
> I'm looking for a PCI card with several analog input channels. This card
> must work with Linux, as I plan to use it
> I want to dump a list of the packages I have installed on a current
> potatoe installto a file, so I can later build a machine with the same
> packages? How do I do this?
dpkg --get-selections > file
Hello,
I've a TNT2-Ultra graphicscard and it works fine with the standard nv driver of
the xfree 4 package, but is there a package where the accelerated driver is
included (that means, mesalibs, xfree-driver, kernel-module)?
thanks for any advice,
Daniel Wagner
--
@gpg: http://stud3.tuwien.ac.a
Hello all. Does any one has a script that would
1. Look into the debian site, get instructions about
directory structure (packages).
2. Look into CDs -binaries- loaded in /cdrom, or /whatever.
3. Upon finding a match, will retrieve it from CD and put it in
the partial local mirror in the ri
hello,
i am searching for some hosts for time updating of my hosts
where can i find the listings of hosts offering this service?
i am in France BTW, so any host network-near Strasbourg would be fine...
--
ciao bboett
==
[EMAIL PROTEC
On Sat, Nov 25, 2000 at 01:58:12PM +1100, Daniel Knights wrote:
> >Do the servers all have the same type of network-cards? I have a 3Com
> >3c900 Combo and it seems this card doesn't react anymore after some
> >time. An ifdown+ifup brings it back again.
> >Phil
> >
> Hi Phil
>
> The card is a Ne
My X will not start neither with xdm nor startx.
Here is the output from
X -probeonly 2>x
I have not configured X again after this weeks upgrades,
should I?
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86@XFree86.Org and patches submitte
Dave Bacon wrote:
> Thanks to Jaume for the very helpful reply.
>
> After following the suggestion listed below I am now able to bring up a
> graphical display,
> but it is only an "x"(mouse cursor) on top of a coarse gray back ground. I
> am not sure,
> but I think I still may need to specify
I'm looking for a PCI card with several analog input channels. This card
must work with Linux, as I plan to use it in an embedded system.
If anyone has an URL describing such a card, I'd be happy to receive it
by *private* mail.
Thanks in advance.
Sam
I want to dump a list of the packages I have installed on a current
potatoe installto a file, so I can later build a machine with the same
packages? How do I do this?
brian
--
Brian Lavender
http://www.brie.com/brian/
>
> The card is a Netgear with a Tulip Digital 21040 chip which is what we have
> in the Redhat and SuSe servers and they do not behave this way.
Do they all have the same kernel (read: driver) version ? Maybe Suse/RH
use a newer driver ? Because I can remember tulip drivers having problems
with
On Sáb 25 Nov 2000 07:19, Rogelio E. Castillo Haro wrote:
> Hi,
> I use CUPS and I configure my Deskjet 840C. I print perfectly from any
> application, but from staroffice I can't print to it.
>
> Why? Someone has any idea about it?
>
> Is because Staroffice need to print to a postscript printer...
Well, just a guess, but I might check your /etc/inetd.conf, and your
/etc/hosts.allow and /etc/hosts.deny files. Might be something awry there.
Monte
James Preece wrote:
> OK I have got that back in now Thanks.
>
> I can not seem to get remote access to my box, seems like no telnet, no ping
>
I have had this problem before as well. I do not know what causes it, although
it usually happens after some kind of hardware issue.
Reinstall LILO and it should work fine. I am not extremely familiar with this
process, but there are good man pages (man lilo and man lilo.conf). Here are
some ideas
On Sat, Nov 25, 2000 at 12:19:23AM -0600, Rogelio E. Castillo Haro wrote:
> Hi,
> I use CUPS and I configure my Deskjet 840C. I print perfectly from any
> application, but from staroffice I can't print to it.
>
> Why? Someone has any idea about it?
>
> Is because Staroffice need to print to a pos
Thanks to all who replied! My network is working fine right now. appearenty
none of
the drivers on the cd will work with a FA311 (I could be wrong, but i tried to
find
one), so I compiled a new one from http://www.scyld.com/network/index.html,
called
natsemi (National Semiconductor)
I was very
On Sat, Nov 25, 2000 at 12:25:44AM -0500, Seung-woo Nam wrote:
> I downloaded all deb files for kde2 from kde2 mirror ftp server. However,
> when I tried to install packages, I got whole bunch of dependency errors. Can
> I just put the ftp path in /etc/apt/sources.list file and apt-get would take
Hi,
I recently did un upgrade to X 4.0.1, and now my Xserver doesn't want to
start any more. It first complained about font 'fixed' not being available,
and after I editted XF86Config to have more FontPath lines, it now
complains with:
Could not load fontset '-adobe-helvetica-bold-r-*-*-*-120-*-*-
On Fri, Nov 24, 2000 at 11:06:12PM +0100, Josip Rodin wrote:
> Hi,
>
> There's a bug filed against the doc-debian package, including the Debian
> FAQ, about not having good backup instructions for users (admins). See
> http://bugs.debian.org/69197 for details.
>
> Can someone please suggest an an
Hi,
I use CUPS and I configure my Deskjet 840C. I print perfectly from any
application, but from staroffice I can't print to it.
Why? Someone has any idea about it?
Is because Staroffice need to print to a postscript printer...and a
Deskjet is not a Postscript printer
Rogelio
Try installing perl-5.6 before upgrade.
apt-get update
apt-get install perl-5.6
apt-get dist-upgrade
If I'm remembering correctly that worked for me.
Kevin
On Mon, Nov 20, 2000 at 10:57:40AM -0800, Vaibhav Goel wrote:
> Hi all:
>
> I recently tried apt-get upgrading my stable distribution to w
Lawrence H. Robins wrote:
> I am (trying to be) a new Debian user. I have the 2.2r0 CD set
> and got through most of the installation without a problem, but
> near the end of the install, after installing the base system,
> booting it, creating a root account and a user account, I
> accidentally e
89 matches
Mail list logo
