On Fri, 2002-06-14 at 22:53, Aravind Vinnakota wrote:
>
> Hi all,
>Previously I installed Debian on my (Sun Ultra 5 sparc) system using
> CDs. Now, I am looking for other ways to install it. Right now, we install
> Redhat using a minimal image on a floppy and boot the system and install
> the
* Walter Tautz ([EMAIL PROTECTED]) wrote:
>
> Just to reply to myself. It seems to be working now. Either the reboot
> worked or because the root file system was full and consequently
> the scanner module may not have been properly loaded. Albeit I'm
> getting a black and white image even though t
On Fri, Jun 14, 2002 at 12:09:08PM +0100, Paladin wrote:
> Does any one know how to access the BIOS setup of an old IBM PS/2?
> It seems that hitting "del" while booting doesn't work...
Try holding down a shift key while rebooting. This will frequently
cause a keyboard error with a message instruc
Patrick Wiseman wrote:
> apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16)
> apm: disabled on user request.
> ACPI: Core Subsystem version [20011018]
> ACPI: Subsystem enabled
>
> (The 20011018 looks pretty old - is there a more recent .deb?)
That version number is the version of the ACPI /p
On 2002.06.14 22:58 Ian D. Stewart wrote:
Howdy Folks,
I recently installed the FreeCraft .debs, and I the main screen comes
up Ok. However, there is a message at the top that says 'Sound
Disabled. Please check!'. When I exit the program, there is an
error message:
Couldn't open
begin Paul Johnson quotation:
> It begs to be asked: How do we know virus companies aren't hiring the
> folks writing the viruses?
Because they'd get sued, and possibly prosecuted criminally as well. The
AV companies are unscrupulous, ambulance-chasing swine who make a living
out of scaring pe
On 14/06/02 Kevin C. Smith did speaketh:
> It sets the bar below the screen for some reason.
>
> edit ~/.xfce/xfwm-session
>
> for [WM_NAME] XFce Main Panel
> change [GEOMETRY]
> Mine looks like this: [GEOMETRY] 110 722 808 46 0 0
>
> See if that works.
This happened to me too, on both my
Howdy Folks,
I recently installed the FreeCraft .debs, and I the main screen comes
up Ok. However, there is a message at the top that says 'Sound
Disabled. Please check!'. When I exit the program, there is an error
message:
Couldn't open audio: No available audio device
I've conf
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Fri, Jun 14, 2002 at 01:07:29PM -0700, Craig Dickson wrote:
> Which rather begs the question of what the point is of "infecting" the
> JPEG files at all. This whole thing is just more of McAfee's usual
> dishonest hype for their anti-virus software
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Fri, Jun 14, 2002 at 12:03:21PM -0700, Paul E Condon wrote:
> Today's Sacramento Bee contains a news report about a new virus,
> called Perrun, that infects JPEG files. (Yes, data files) Does anyone
> on this list know what this is? and is it a prob
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sat, Jun 15, 2002 at 05:30:43AM +0800, Dan Jacobson wrote:
> I'm scared s*itless about wafting about my real e-mail address on my
> posts here, as I've already seen account after account of mine get
> buried in spam and now all's I got left is my re
Hi all,
Previously I installed Debian on my (Sun Ultra 5 sparc) system using
CDs. Now, I am looking for other ways to install it. Right now, we install
Redhat using a minimal image on a floppy and boot the system and install
the OS from our local mirror using http. I am looking something simila
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sat, Jun 15, 2002 at 04:34:29AM +0800, Dan Jacobson wrote:
> By the way, of the other experiments:
> insmod: apm: no module by that name found
> I sure don't understand linux modules. It cannot be found, but one
> can turn it on at the boot prompt
СУ-ДЖОК,
НАЙ-МОЩНИЯТ
МЕТОД,
С
КОЙТО МОЖЕМ ДА СЕ ЛЕКУВАМЕ САМИ !
www.mediks-bg.com
Су-джок терапията е последното
достижение на източната медицина. Тя е изключително достъпна и може да бъде
усвоена от всеки за няколко часа.
Със су-джок можете да се лекувате сами
без да е нужно да има
On Thu, 13 Jun 2002, Kevin C. Smith wrote:
> Anyone know how to fix this. I get:
>
> proc::pty_process_exec failed : Undefined subroutine &proc::get_new_pty
> called at /usr/share/webmin/proc/proc-lib.pl line 176.
>
> in several webmin modules:
> Linux Bootup Configuration
> Partitions on Loca
[EMAIL PROTECTED] (nate) writes:
> hi.
>
> this is getting frustrating. I recently setup CUPS on my desktop
> to spool to a Jetdirect card connected to a HP Laserjet 4000.
>
> I can print fine if i use lpr, or if i use netscape(4.x) which
> calls lpr, or adobe acrobat reader which calls lpr too. e
> "nate" == nate <[EMAIL PROTECTED]> writes:
[...]
nate> at the moment i have worked around it by printing to a file and
nate> using ps2pdf to convert to pdf and printing from adobe acrobat.
I can't really help you with your printing problem, since I don't print
From Star/Open Office, but y
On Sat, Jun 15, 2002 at 06:17:43AM +0800, Dan Jacobson wrote:
> Anybody written a Mandrake to Debian migration guide? It's been half
> a month and I'm only 1/2 way thru migrating from Mandrake 7.2 to
> woody. Perhaps due to encrusting myself with scripts that have this
> file moved or that servic
On Fri, 14 Jun 2002, j2 wrote:
> DDS1: 1GB
> DDS2: 4GB
> DDS3: 12GB
> DDS4: 24GB
>
> (above is all _physical_ data capacity)
DDS1 is 2 gig.
DDS4 is 20 gig.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
On Fri, Jun 14, 2002 at 04:02:02PM -0700, ian wrote:
> i upgraded to XFree86 4.1 and now when i try to run emacs, vi, etc. i
> keep getting this error:
>
> /lib/libc.so.6: version 'GLIBC_2.2' not found required by
> /user/X11R6/libX11.so.6
How did you upgrade? It sounds like you've forced depend
On Sat, Jun 15, 2002 at 12:38:45AM +0100, Paladin wrote:
> On Fri, 14 Jun 2002 13:40:59 +0100
> Colin Watson <[EMAIL PROTECTED]> wrote:
> > Your mail setup is also rather warped - it doesn't insert
> > attributions, and it keeps starting new threads which I have to
> > manually link together in mut
On Fri, Jun 14, 2002 at 06:19:47PM -0500, Derrick 'dman' Hudson wrote:
> You will get email in the following circumstances :
> 1) the maintainer acknowledges or closes the bug
> (if you reported it, don't you want to know it's been fixed?)
> 2) the maintainer (or someone else) wan
On Fri, 2002-06-14 at 18:38, Paladin wrote:
> On Fri, 14 Jun 2002 13:40:59 +0100
> Colin Watson <[EMAIL PROTECTED]> wrote:
[snip]
> I always thought that this was the correct way of threading! Does
> this have anything to do with the fact that every time that I reply
> to some message in the mailin
"Henning, Brian" wrote:
> I have a grub boot floopy that has no file system. It just boots into grub.
> I want to be able to put this floppy boot section onto a cd image to burn to
> a cd. I don't really care if the cd image has a file system or not. I just
> want it to boot grub. I am pretty sure
Welcome to the Workplacelaw Network, the national legal support service for
businesses in the UK.
You have been registered to receive free updates on employment law, health and
safety and premises management. This free update service is delivered weekly by
e-mail direct to your in box, in plai
On Fri, 14 Jun 2002 13:40:59 +0100
Colin Watson <[EMAIL PROTECTED]> wrote:
> Your mail setup is also rather warped - it doesn't insert
> attributions, and it keeps starting new threads which I have to
> manually link together in mutt if I want to follow the
> conversation ...
In the header of the
On Fri, 2002-06-14 at 17:17, Dan Jacobson wrote:
> Anybody written a Mandrake to Debian migration guide? It's been half
> a month and I'm only 1/2 way thru migrating from Mandrake 7.2 to
> woody. Perhaps due to encrusting myself with scripts that have this
> file moved or that service closed on d
On Sat, Jun 15, 2002 at 05:30:43AM +0800, Dan Jacobson wrote:
| I'm scared s*itless about wafting about my real e-mail address on my
| posts here, as I've already seen account after account of mine get
| buried in spam and now all's I got left is my real ISP address-- all
| from posting to "little
Hi. I searched the archives about this and found a thread or two that
was relevant, but they were more than 3 years old. At that time, the
issue was caused by moving ldd from ldso to libc6.
I have a woody system that I recently installed fresh. I have libc6
2.2.5-6. I don't have ldd, which is
On Sat, Jun 15, 2002 at 05:20:39AM +0800, Dan Jacobson wrote:
| Sure I've got a lot of bugs I could report, however I recall when I
| reported a perl bug once to the perlbug people. It was like I had
| adopted a child when alls I wanted was a one night stand: I found a
| workaround. I am was just
At 17:53 Uhr -0500 14.06.2002, Kevin C. Smith wrote:
Anyone have a working XF86config-4 they are willing to share?
See mine on http://pflanze.mine.nu/~chris/ppc/X/ (for the same machine, woody).
Christian.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Troubl
On Sat, Jun 15, 2002 at 04:34:29AM +0800, Dan Jacobson wrote:
| By the way, of the other experiments:
| insmod: apm: no module by that name found
| I sure don't understand linux modules. It cannot be found, but one
| can turn it on at the boot prompt.
In the pre-packaged 2.2 kernels it is built
On Sat, Jun 15, 2002 at 05:30:43AM +0800, Dan Jacobson wrote:
> I'm scared s*itless about wafting about my real e-mail address on my
> posts here, as I've already seen account after account of mine get
> buried in spam and now all's I got left is my real ISP address-- all
> from posting to "little
On Sat, Jun 15, 2002 at 06:45:43AM +0800, csj wrote:
| On Wed, 12 Jun 2002 22:36:25 -0500
| "Derrick 'dman' Hudson" <[EMAIL PROTECTED]> wrote:
|
| > I've been using devfs for months. I really like it. It makes it much
| > easier to identify problems with "missing" devices. (I can't read my
|
I'm trying to help a friend install debian on a
apple powerbook "lombard" "bronze keyboard"
X fails to start correctly. It becomes a runaway process taking over
99.8% of the cpu and never lets up.
Anyone have a working XF86config-4 they are willing to share?
--
Kevin C. Smith | "A S
On Wed, 12 Jun 2002 22:36:25 -0500
"Derrick 'dman' Hudson" <[EMAIL PROTECTED]> wrote:
> I've been using devfs for months. I really like it. It makes it much
> easier to identify problems with "missing" devices. (I can't read my
> cd, but /dev/cdrom is there. It doesn't matter if the inode i
On 2002.06.14 17:14 Karl E. Jorgensen wrote:
On Fri, Jun 14, 2002 at 12:08:13PM -0400, Ian D. Stewart wrote:
> Howdy Folks,
>
> In windows, you can right click on the task bar and one of the
options
> is to minimize all windows, exposing the underlying desktop. I've
> looked through both the gno
» Assim falou Angelo Marcos Rigo em Fri, Jun 14, 2002 at 05:24:10PM -0300:
> Na inicialização o debian mostra o nt
> mas nao entra nele se o seleciono, tentei de varias maneiras
> (nt master debian slave, o nt so mostra o nt, Debian master, nt slave o
> lilo mostra o nt mas so entra no Debian)
>
Anybody written a Mandrake to Debian migration guide? It's been half
a month and I'm only 1/2 way thru migrating from Mandrake 7.2 to
woody. Perhaps due to encrusting myself with scripts that have this
file moved or that service closed on debian and need rewriting.
--
http://jidanni.org/ Taiwan(
I'm scared s*itless about wafting about my real e-mail address on my
posts here, as I've already seen account after account of mine get
buried in spam and now all's I got left is my real ISP address-- all
from posting to "little known mailing lists".
Anyways I tremble in my boots each time one of
Sure I've got a lot of bugs I could report, however I recall when I
reported a perl bug once to the perlbug people. It was like I had
adopted a child when alls I wanted was a one night stand: I found a
workaround. I am was just reporting the bug for the public good and
wished to move on. There's
> "C" == Chris Kenrick <[EMAIL PROTECTED]> writes:
C> On Thu, Jun 13, 2002 at 08:12:35AM +0800, Dan Jacobson wrote:
>> poweroff just does the same as "shutdown -h now" for me: turns off the
>> disks only. On mandrake 7.2 however, "shutdown -h now" does indeed
>> turn off the whole computer, c
Read the whole story here:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=150005&repeatmerged=yes
I do not subscribe to these mailing-lists, so please Cc: to me. If you
want to send replies also to mailing-lists, use only debian-user,
please.
--
Juhapekka "naula" Tolvanen * * http://www.st.
nate wrote:
hi.
this is getting frustrating. I recently setup CUPS on my desktop
to spool to a Jetdirect card connected to a HP Laserjet 4000.
What I did was to install qtcups and tell the various apps to print to
qtcups instead of lpr, etc. You might give it a spin.
Kent
--
To UNSUBSCR
REQUEST
Dear Friend,
I am a Solicitor resident and practicing in
Lagos, Nigeria and I am using this correspondence to urgently seek
and
request your assistance and cooperation in a sensitive but highly
beneficial financial arrangement. An important clien
hi.
this is getting frustrating. I recently setup CUPS on my desktop
to spool to a Jetdirect card connected to a HP Laserjet 4000.
I can print fine if i use lpr, or if i use netscape(4.x) which
calls lpr, or adobe acrobat reader which calls lpr too. everything
comes out fine. I can print select(
On Fri, Jun 14, 2002 at 12:08:13PM -0400, Ian D. Stewart wrote:
> Howdy Folks,
>
> In windows, you can right click on the task bar and one of the options
> is to minimize all windows, exposing the underlying desktop. I've
> looked through both the gnome-list archive and the Gnome User's Guide
Thanx Collin... yes i did miss your response. Thanx again for the update.
ian
At 02:10 AM 6/14/02, you wrote:
On Thu, Jun 13, 2002 at 09:20:53PM -0700, ian wrote:
> >i would like to know how to change my default gcc compiler from the
> >current version to another.
Perhaps you didn't see my res
Can somebody help me with the kupdate daemon' problem. I looked around
but could not find a understandable page that could help me. The
kupdated process takes about 1/3 of my cpu and can't be killed.
I started with a potato installation from where I apt-get dist-upgrade'd
to unstable. Then the nv
I like sometimes prefer 'tops' rather than 'ps'
At 04:26 AM 6/14/02, you wrote:
Hello list,
I'd like to show the process list and try to list those who has be
running over customized time. Is it possible? Say, I'd like to list the
cron programs which has been running for 3 days.
--
Patrick Hs
hi all,
i upgraded to XFree86 4.1 and now when i try to run emacs, vi, etc. i keep
getting this error:
/lib/libc.so.6: version 'GLIBC_2.2' not found required by
/user/X11R6/libX11.so.6
did i overwrite a library file or does my C library needs updating?
thanx
ian
--
To UNSUBSCRIBE, email to
> I have a Sony SDT-7000 tape drive that can, theoretically, record up to
> 8 Gb of data on a DDS2 tape. However, I can only get it to store 4 Gb
> on any DDS2 tape I try (4 Gb == max for DDS1, iirc).
No, a SDT-7000 is a DDS2 drive. they hold 4GB of _uncompressed_ data. If
compress the data and a
Glyn Millington <[EMAIL PROTECTED]> writes:
> Kent West <[EMAIL PROTECTED]> writes:
>
> >
> > I appreciate your response. Could any one give me any guidance as to
> > how this is done? Do I use the standard OpenOffice (English version)
> > that I already have and just do something with locales or
begin Alan Shutko quotation:
> Paul E Condon <[EMAIL PROTECTED]> writes:
>
> > Today's Sacramento Bee contains a news report about a new virus,
> > called Perrun, that infects JPEG files. (Yes, data files)
>
> Those "infected" jpegs are completely harmless unless you already have
> been infec
On 2002.06.13 12:34 Derrick 'dman' Hudson wrote:
On Thu, Jun 13, 2002 at 11:14:48AM +0200, Jerome Lacoste wrote:
| I have the following in top:
|
| PID USER PRI NI SIZE RSS SHARE STAT %CPU %MEM TIME
COMMAND
| 532 root 16 -10 289M 32M 7528 S < 54.6 6.5 8:35
XFree86
|
| I t
On Fri, 2002-06-14 at 14:13, Miquel van Smoorenburg wrote:
> In article <[EMAIL PROTECTED]>,
> Ross Boylan <[EMAIL PROTECTED]> wrote:
> >By the way, I'm not sure what the success thing was in the stop case
> >below; I got errors when I tested it and removed it from my script.
>
> That's because t
Paul E Condon <[EMAIL PROTECTED]> writes:
> Today's Sacramento Bee contains a news report about a new virus,
> called Perrun, that infects JPEG files. (Yes, data files)
Those "infected" jpegs are completely harmless unless you already have
been infected by the real virus.
> and is it a problem
In article <[EMAIL PROTECTED]>,
Ross Boylan <[EMAIL PROTECTED]> wrote:
>By the way, I'm not sure what the success thing was in the stop case
>below; I got errors when I tested it and removed it from my script.
That's because the example was actually a redhat example.
A standard init.d template c
On Fri, 2002-06-14 at 14:03, Paul E Condon wrote:
> Today's Sacramento Bee contains a news report about a new virus, called
> Perrun,
> that infects JPEG files. (Yes, data files) Does anyone on this list know what
> this is? and is it a problem for Debian GNU/Linux?
>
There's a good slashdot art
Today's Sacramento Bee contains a news report about a new virus, called Perrun,
that infects JPEG files. (Yes, data files) Does anyone on this list know what
this is? and is it a problem for Debian GNU/Linux?
--
Paul E Condon
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL
On Fri, Jun 14, 2002 at 01:16:02PM -0500, Alex Malinovich wrote:
> My unstable mirror for i386 is currently ~5 GB. I've got a Perl script
> that I wrote that scans through the Packages.gz for the different
> distributions and just adds up all of the file sizes. The format of
> Packages.gz is straig
On Fri, 2002-06-14 at 11:36, Jamin W.Collins wrote:
> First, please don't reply to an existing thread to start a new one.
>
> On Thu, 13 Jun 2002 10:52:56 -0400 (EDT)
> "Rob Ransbottom" <[EMAIL PROTECTED]> wrote:
>
> > How do I determine space required mirror the source and
> > binary-i386 aspect
Thanks,
Exists one script zopectl (in /usr/sbin).
Thanks again.
On Fri, 2002-06-14 at 12:00, Jan Johansson wrote:
> > How can i start and stop the zope server? In SuSE and FreeBSD there
> > are the start and stop script, and in Debian/GNU Linux? I have stopped
> > with kill, and can't
On Fri, 2002-06-14 at 19:19, Matthias Ellinger wrote:
>
> create file in /etc/X11/gdm/Sessions/blackbox
>
> "exec blackbox"
>
> save and mark as executable.
>
> Restart gdm - that should do it.
Thank's this worked very well...:-)
Cheers,
HÖ
--
~ This message is digitally signed - GPG key
ScanMail for Microsoft Exchange has taken action on the message, please
refer to the contents of this message for further details.
Sender = debian-user@lists.debian.org
Recipient(s) = [EMAIL PROTECTED];
Subject = How are you
Scanning Time = 06/14/2002 10:49:19
Engine/Pattern = 6.150-1001/299
Acti
On Fri, 14 Jun 2002, I wrote:
> I'm sure I've missed something obvious and will feel really dumb when it's
> pointed out to me!
Doh! Glad I found it before anyone asked :) I'd compiled ACPI support
but not all the 'bits' that make it actually do anything!! Now when I
boot, a 'dmesg | grep ACPI
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
>On Fri, 2002-06-14 at 18:33, Derrick 'dman' Hudson wrote:
>> If your users want to use blackbox, all they need to do is run the
>> Control Center (gnomecc) and choose it in the window manager section.
>> (if it isn't already listed, add it)
>>
>The p
On Fri, Jun 14, 2002 at 07:13:07PM +0200, Helgi Örn Helgason wrote:
| On Fri, 2002-06-14 at 18:33, Derrick 'dman' Hudson wrote:
| > If your users want to use blackbox, all they need to do is run the
| > Control Center (gnomecc) and choose it in the window manager section.
| > (if it isn't already l
Hello,
On Fri, Jun 14, 2002 at 11:48:08AM -0500, Ron Johnson wrote:
> Over a local, switched fast ethernet connection, what kind of
> performance drain will I see tunneling through ssh? Both boxen
> are GHz+.
I only have an 650 MHz, so I cannot say how it will work on your system.
Most programs c
On Fri, 2002-06-14 at 18:33, Derrick 'dman' Hudson wrote:
> If your users want to use blackbox, all they need to do is run the
> Control Center (gnomecc) and choose it in the window manager section.
> (if it isn't already listed, add it)
>
The point is to be able to start Blackbox as desktop not a
On Fri, 2002-06-14 at 11:15, Jamin W.Collins wrote:
> On 14 Jun 2002 11:11:58 -0500
> "Ron Johnson" <[EMAIL PROTECTED]> wrote:
>
> > Ok... From an xterm window on my local box, I do
> > $ssh -X @
> >
> > Then from the command prompt on the remote box, I type
> > $mtr -g www.cox.net
> > and
First, please don't reply to an existing thread to start a new one.
On Thu, 13 Jun 2002 10:52:56 -0400 (EDT)
"Rob Ransbottom" <[EMAIL PROTECTED]> wrote:
> How do I determine space required mirror the source and
> binary-i386 aspects of stable, unstable and testing?
I mirror the above for both i3
How do I determine space required mirror the source and
binary-i386 aspects of stable, unstable and testing?
rob Live the dream.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
On Fri, 14 Jun 2002, Ian D. Stewart wrote:
> In windows, you can right click on the task bar and one of the options
> is to minimize all windows, exposing the underlying desktop.
XFce has an "Iconify All" option when you right-click on the desktop - of
course, that presumes that some desktop is
In metacity you can use ctl+alt+d to minimize all. This should also be
included in the gnome actions menu eventually I would hope.
dave
On Fri, 2002-06-14 at 12:08, Ian D. Stewart wrote:
> Howdy Folks,
>
> In windows, you can right click on the task bar and one of the options
> is to minimize a
On Fri, 2002-06-14 at 11:11, Ron Johnson wrote:
> On Fri, 2002-06-14 at 10:32, David Z Maze wrote:
> > Matthew Yee-King <[EMAIL PROTECTED]> writes:
[snip]
> > Eew eew eew. Don't do that. Debian disables unencrypted X network
> > sessions. But since you're using ssh to log in from one machine to
> got a little problem with mozilla 1.0.0 and galeon 1.2.5 - i think.
> Things started going real slow today and i checked with top and gtop to
> see whats going on there.
> That shows for galeon and mozilla 5 running processes each eating up 18
> megs of RAM each.
> Can that be ok?
> I updated gal
Howdy Folks,
In windows, you can right click on the task bar and one of the options
is to minimize all windows, exposing the underlying desktop. I've
looked through both the gnome-list archive and the Gnome User's Guide
but was unable to find any reference to similiar functionality.
Is this
On Fri, Jun 14, 2002 at 02:29:18PM +0200, Helgi Örn wrote:
| Hello all!
|
| I installed Blackbox and I want to put it Logi sessions menu but I'm not
| sure how to do that, can someone exolain that for me. I know this:
| gdmconfig -> Expert -> Login sessions -> Add session
| But what should I put i
On 14 Jun 2002 11:11:58 -0500
"Ron Johnson" <[EMAIL PROTECTED]> wrote:
> Ok... From an xterm window on my local box, I do
> $ssh -X @
>
> Then from the command prompt on the remote box, I type
> $mtr -g www.cox.net
> and instantly get the error
> Gtk-WARNING **: cannot open display:
>
>
Kent West <[EMAIL PROTECTED]> writes:
>
> I appreciate your response. Could any one give me any guidance as to
> how this is done? Do I use the standard OpenOffice (English version)
> that I already have and just do something with locales or with kbd or
> something? Or do I download a special Germ
On Fri, Jun 14, 2002 at 09:04:37AM -0400, Patrick Wiseman wrote:
| apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16)
| ACPI: APM is already active, exiting
|
| So, I disabled APM (by appending "apm=off" in lilo.conf), and, on
| rebooting, got this:
Good so far.
| apm: BIOS version 1.2 Flag
Hello,
got a little problem with mozilla 1.0.0 and galeon 1.2.5 - i think.
Things started going real slow today and i checked with top and gtop to
see whats going on there.
That shows for galeon and mozilla 5 running processes each eating up 18
megs of RAM each.
Can that be ok?
I updated galeon to
On Fri, Jun 14, 2002 at 11:15:31AM -0500, Derrick 'dman' Hudson wrote:
> On Fri, Jun 14, 2002 at 02:59:24PM +1000, James Cameron wrote:
> | The package I have made (which also adds a graphical shutdown image
> | using zgv) does this in the post-installation script ...
> |
> | # change control/alt/
On Fri, 2002-06-14 at 10:32, David Z Maze wrote:
> Matthew Yee-King <[EMAIL PROTECTED]> writes:
> > I'm running gdm, windowmaker, woody and xfree 4.2. i need to run
> > software on a remote mahcine that outputs to my local X server. On
> > the remote machine, i export DISPLAY="mylocalIP:0" then on
Paladin wrote:
>
> Does any one know how to access the BIOS setup of an old IBM PS/2?
> It seems that hitting "del" while booting doesn't work...
As other have mentioned they don't have a bios, they use sectors on the
disk instead and load the bios/rom at boot. I've read that some
mainframes use
This is a followup to yesterday's attempt to get a CoStar Labelwriter XL
working under linux.
I plugged the thing into a windows laptop and it printed fine, so the
problem is not in the printer.
If I start statserial, point it at /dev/ttyS1, and plug/unplug the printer
from the computer, the CTS/
On Fri, Jun 14, 2002 at 02:59:24PM +1000, James Cameron wrote:
| On Fri, 2002-06-14 at 11:51, Derrick 'dman' Hudson wrote:
| > On Fri, Jun 14, 2002 at 10:39:54AM +1000, James Cameron wrote:
| > | (b) how to make this change to /etc/inittab as a package to be installed
| > | on multiple machines?
|
On Fri, Jun 14, 2002 at 01:32:49PM +0100, Matthew Yee-King wrote:
| I am trying to get realplayer working. I downloaded the installer
| from realnetworks and installed it. when i run it, it opens a
| window, maybe displays a couple of widgets, then locks up.
|
| anyone else had this problem?
Ye
On Fri, Jun 14, 2002 at 02:50:01PM +0200, Jan Johansson wrote:
| > Your mail setup is also rather warped - it doesn't insert
| > attributions,
| > and it keeps starting new threads which I have to manually
| > link together
| > in mutt if I want to follow the conversation ...
|
| Well, thats wha
On Fri, Jun 14, 2002 at 10:33:47AM +0200, David Dumortier wrote:
| I've got a Olitec DSL-modem chipset Connexant under woody, kernel 2.4.18
| and my pinguin box don't want to configure it !!!
|
| I explain :
| - scanpci & lspci say IRQs, adresses and others but say unknown device
lspci should te
On 14 Jun 2002 10:45:23 -0500
"Ron Johnson" <[EMAIL PROTECTED]> wrote:
>
> And apparently he's done a good job of it, too...
Oh well I hope he gets an respectable job this time.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
On Thu, Jun 13, 2002 at 04:07:30PM -0700, David Wright wrote:
|
| Looking over your files, I see quite a few problems:
|
| 1) You need to configure nss_ldap.conf as well as pam_ldap.conf.
Umm, I don't have that ... I need to install libnss-ldap ... that
really helps :-).
| 2) The lines in nssw
On Fri, 2002-06-14 at 10:31, Helgi Örn wrote:
> On Sat, 2002-06-15 at 03:28, Andrey Petrunko wrote:
> > Hello!
> > My name is Andrey Petrunko. I'm computer programmer from Russia. I have
[snip]
> >
> > Andrey Petrunko
> > [EMAIL PROTECTED]
> Well what do you make of this! He's been developing a to
Matthew Yee-King <[EMAIL PROTECTED]> writes:
> I'm running gdm, windowmaker, woody and xfree 4.2. i need to run
> software on a remote mahcine that outputs to my local X server. On
> the remote machine, i export DISPLAY="mylocalIP:0" then on my local
> machine, i xhost .
Eew eew eew. Don't do th
On Sat, 2002-06-15 at 03:28, Andrey Petrunko wrote:
> Hello!
> My name is Andrey Petrunko. I'm computer programmer from Russia. I have
> immigration visa and the air tickets from Russia to Canada. I will be
> relocated
> from Russia into Toronto July 17. I have very good practice as the computer
>
On Thu, 2002-06-13 at 17:44, Paulo Henrique Baptista de Oliveira wrote:
>
> Hi,
> I configured a potato box with cups from potato and hp-ppd from woody.
> No problem.
> I only cant find the double side option.
> Is this because I'm using potato?
> Can you send me you
> How can i start and stop the zope server? In SuSE and FreeBSD there
> are the start and stop script, and in Debian/GNU Linux? I have stopped
> with kill, and can't restart
/etc/init.d/zope restart (or stop, or start or...)
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "
Em Sex, 2002-06-14 às 03:45, Grégoire Cachet escreveu:
> hello
>
> I try to configure mailman on my gateway for internet, using the exim mail
> server
>
> My system is debian woody
>
> I installed exim, and just changed the configuration in order to relay
> my own computer on the local network.
hello,
How can i start and stop the zope server? In SuSE and FreeBSD there
are the start and stop script, and in Debian/GNU Linux? I have stopped
with kill, and can't restart
Thanks!
--
-
thesirbr
1 - 100 of 154 matches
Mail list logo
