savagefb and acpi standby

Hi, I had acpi standby working so that when the lid of my laptop closed it would go into standby mode. Things would correctly come up again when I hit the power button. I just moved from using the VESA framebuffer to the savage framebuffer, and now it hangs when I try to wake the laptop up again

SSH attack

It looks like I am being rooted right now. How do I toss this guy off of my system. he has an IP address of 210.95.212.131 Please get back to me fast. I took the compilers off of the system, and it's only running dns... so there's no firewall or anything. I can't shut down ssh because that's m

Re: GRUB loader error message

On Sun, 2 Oct 2005, Jeremy Merritt wrote: > Windoze is installed on /dev/hda1 k > /dev/hda1 * 12433195430417 > HPFS/NTFS k .. that agrees with your prior statement > /dev/hda22434486519535040f > W95 Ext'd (LBA) that is windoze too

Re: iPodder wont start

On Sunday 02 October 2005 13:36, Roger Creasy <[EMAIL PROTECTED]> (<[EMAIL PROTECTED]>) wrote: > Yes, I installed the Debian package. Just to be sure, you ran 'apt-get install ipodder' or the equivalent? > I do not have 'python-wxgtk2.6' in my > available list. I am running Sarge,; I mentioned

Re: GRUB loader error message

Here is the fdisk -l output from today. If this is of any help. There was no physical drive swapping, all I did was set the BIOS to look at hdb first, before hda. It WAS looking at hda first before. Disk /dev/hda: 40.0 GB, 40020664320 bytes 255 heads, 63 sectors/track, 4865 cylinders Units = cylin

Re: GRUB loader error message

Hey Alvin-- Windoze is installed on /dev/hda1 Here is an output from fdisk -l: Disk /dev/hda: 40.0 GB, 40020664320 bytes 255 heads, 63 sectors/track, 4865 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 *

Re: Via 8237: No sound output.

What exact error msg do you see? Which program is it? Did you try to use the alsaconf command? I have the same via chip working ok, the only command i used was alsaconf. Babu wrote: Dear All, I am unable to get the onboard sound card output from my PC. I am using Sarge 3.1.

Via 8237: No sound output.

Dear All,                 I am unable to get the onboard sound card output from my PC. I am using Sarge 3.1. Please reply and thanks in advance. Problem is the sound card is detected but when I try to get the output it gives an error stating that it will use /dev/null device to get the out

Re: apache2 mod_perl sarge not working

Is there any documentation on how mod_perl2 differs in Sarge from the official release? In addition does anyone know when the "official" release of mod_perl2 will be included in Sarge? And could I help in getting the official release into Sarge? I have some time on my hands and would to help is p

Why don't I have /dev/inotify?

Hi, I grabbed a 2.6.13.2 kernel off kernel.org and built it with these options: CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_INOTIFY=y But when I boot, I don't get a /dev/inotify device. Things relating to inotify appear in /proc/sys

Re: Basic question about recompiling program with different options

Quoting Steve Dondley <[EMAIL PROTECTED]>: I'm using the VIM text editor and want to recompile it so that it can use Perl regular expressions when doing a search in a file. How do I do this easily? If you know the options (if not, they are probably listed in the source package), then you can

Re: upgrading to etch after installing sarge

On Thu, 29 Sep 2005 14:56:17 -0700 Andy Streich <[EMAIL PROTECTED]> wrote: > Thanks. I've pinned udev. Any hint on how to avoid this kind of thing in > the > future with some other package upgrade? I was using synaptic, added testing > to the repository after installing sarge, and then chose

Re: internet connection

On Sun, Oct 02, 2005 at 05:24:18PM -0700, Tyler Lee wrote: > please give me a step by step instruction on how to > connect online using wireless. See here: http://lists.bostoncoop.net/pipermail/linux-disciples/2005-February/001044.html for what should count as the canonical explanation of this so

internet connection

i am having hard time trying to connect online with debian. my laptop is pentium m so i believe there is a wireless network card in it. i am using debian 2.2 please give me a step by step instruction on how to connect online using wireless. thank u very much, and u guys are awesome. tyler

Using xfig (was: Re: [OT] Drawing a rectangle with Gimp)

On Oct 02 2005, Alvin Oga wrote: > i can only draw squares with xfig or dia or geda > - too much buttons and menus just to make simple > squares, rectangles, cirles, lines, and arrows Really, using xfig is an excellent option for those interested in generating (vector) graphics that ca

Re: [OT] Drawing a rectangle with Gimp

On Sun, 2 Oct 2005, Hugo Vanwoerkom wrote: > ®áèek Kry¹tof wrote: > > Good joke ! > > XPAINT looks even worse than GIMP :-) > > > > As the Debian maintainer of Xpaint, should I take offence? nah... he didnt say why it was good or bad.. - this was done in gimp ... by a "gimp[ee|er]", htt

Re: apache2 mod_perl sarge not working

On lørdag 01 oktober 2005, 03:47, marek wrote: > Thanks for pointing out my mistake in the directive. > I have corrected that and added the Options +ExecCGI. Now > the script is functioning. There's one thing you might want to note with mod_perl2 in Sarge, though: Debian has an alpha of mod_perl

Re: [OT] Drawing a rectangle with Gimp

Žáček Kryštof wrote: Good joke ! XPAINT looks even worse than GIMP :-) As the Debian maintainer of Xpaint, should I take offence? H -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: how to start php

Clive Menzies wrote: > On (02/10/05 14:56), Eric P wrote: > >>Clive Menzies wrote: >> >>>On (02/10/05 01:48), Eric P wrote: >>> Hi all, Php4 was up and running. Then I tried out dotdeb's php5. Decided to switch back to php4, but now php4 doesn't start when I restart Apache or >>

Re: iPodder wont start

sarge includes wxpython 2.4. that should work. if you search (e.g. insynaptic) for 'wx' you should find a result (called something like wxpython or python-wxgtk) OK. Now I get : basement:/usr/bin# iPodder Traceback (most recent call last):   File "iPodderGui.py", line 41, in ?     import gui.iPod

problems with exar-based serial port card

I'm trying to get a 8-port serial card based on Exar XR17C158 working. It's a PC104 card [1], mounted on a Pentium based PC104 computer [2], which is running Debian Sarge from a 20GiB 1.8" HD. The kernel is however upgraded to a kernel compiled by myself from linux-sources-2.6.12, in order to inclu

Re: apt-get: how to remove old config files?

On Sunday 02 October 2005 09:37, Stefan Salewski <[EMAIL PROTECTED]> (<[EMAIL PROTECTED]>) wrote: > To remove old config files reinstallation of the packed > and subsequent removing with option --purge should work. > Is there a better way? In addition to the other suggestions you've received, you

Re: how to start php

On Sun, Oct 02, 2005 at 11:25:56AM +0100, Clive Menzies wrote: > On (02/10/05 01:48), Eric P wrote: > > libapache2-mod-php5 ^^^ > > php5-common > > php5-mysql > > You seem to be missing php5 itself; php doesn't run as a daemon AFAIK, > it processes scripts on demand. Assuming

Re: linux-source 2.6.12 in sarge?

Hello Marcelo Chiapparini (<[EMAIL PROTECTED]>) wrote: > thank you very much for the tip. Following, as you suggested, the > instructions in the section 3.8 of the apt-howto I was able to install > linux-source-2.6.12 in may sarge system. The next step is to compile a > fresh custom kernel. Only

Re: iPodder wont start

Roger Creasy wrote: On 10/2/05, *Roger Creasy* <[EMAIL PROTECTED] > wrote: On 10/1/05, *Jules Dubois* < [EMAIL PROTECTED] > wrote: On Saturday 01 October 2005 20:36, Roger Creasy <[EMAIL PROTECTED]

Re: how to start php

On (02/10/05 14:56), Eric P wrote: > Clive Menzies wrote: > > On (02/10/05 01:48), Eric P wrote: > >>Hi all, > >> > >>Php4 was up and running. Then I tried out dotdeb's php5. Decided to > >>switch back to php4, but now php4 doesn't start when I restart Apache or > >>even reboot. I reinstalled ph

Re: GRUB loader error message

Jeremy Merritt wrote: > I was having trouble getting the grub loader to work > on my machine after having to re-install Windoze XP. > Finally I got the grub menu to come up but Debian will > not load properly. > > /dev/hdb2 is the location of /root/grub > > The commands for loading Debian are li

Re: how to start php

Clive Menzies wrote: > On (02/10/05 01:48), Eric P wrote: > >>To: debian-user@lists.debian.org >>From: Eric P <[EMAIL PROTECTED]> >>Date: Sun, 02 Oct 2005 01:48:47 -0500 >>Subject: how to start php >> >>Hi all, >> >>Php4 was up and running. Then I tried out dotdeb's php5. Decided to >>switch bac

Re: iPodder wont start

On 10/2/05, Roger Creasy <[EMAIL PROTECTED]> wrote: On 10/1/05, Jules Dubois < [EMAIL PROTECTED]> wrote: On Saturday 01 October 2005 20:36, Roger Creasy <[EMAIL PROTECTED]>(< [EMAIL PROTECTED] >) wrote:> OK. I do get the following:>> basement:/usr/bin# iPodder> Traceback (most recent call last):> F

Re: iPodder wont start

On 10/1/05, Jules Dubois <[EMAIL PROTECTED]> wrote: On Saturday 01 October 2005 20:36, Roger Creasy <[EMAIL PROTECTED]>(<[EMAIL PROTECTED] >) wrote:> OK. I do get the following:>> basement:/usr/bin# iPodder> Traceback (most recent call last):> File "iPodderGui.py", line 22, in ?> import wx> ImportE

Re: your mail

On Sun, 02 Oct 2005 the mental interface of Clive Menzies told: > On (01/11/05 13:41), Jose Benavides G. wrote: > > Go to: > http://www.debian.org/MailingLists/subscribe > > to subscribe ROFL To: debian-user@lists.debian.org Mail-Followup-To: debian-user@lists.debian.org I think Jose Benavide

Re: your mail

On (01/11/05 13:41), Jose Benavides G. wrote: Go to: http://www.debian.org/MailingLists/subscribe to subscribe Regards Clive -- www.clivemenzies.co.uk ... ...strategies for business -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PRO

[no subject]

subscribe [EMAIL PROTECTED] -- __ _ Debian GNU User Jose Benavides / /(_)_ __ _ ___ __ Software Engineer / / | | '_ \| | | \ \/ / cel: 56+8+4548357 / /__| | | | | |_| |>

subscribe <[EMAIL PROTECTED]>

subscribe <[EMAIL PROTECTED]> -- __ _ Debian GNU User Jose Benavides / /(_)_ __ _ ___ __ Software Engineer / / | | '_ \| | | \ \/ / cel: 56+8+4548357 / /__| | | | | |_| |>

Re: Bandwidth by port

Gawd Amighty wrote: > Hi Debian users, > > Can anyone suggest a method to track bandwidth usage by port number? > As far as I can tell, MRTG will only track bandwidth usage by > interface. Google isn't giving me any hints. > > -WG You may want to try ntop Jan -- ** Do not use the reply-to addr

Re: Looking for a way to check for status of DHCP connection

On 10/01/2005 07:00 PM, Arjen Verweij wrote: > Hi, > > I have an annoying problem lately. Sometimes my cable internet (DHCP) > breaks down. It is usually fixable by: > > sudo ifdown eth1 > sudo ifup eth1 > > For now I have written a small perl script that runs as root, to do this > for me in cas

Re: linux-source 2.6.12 in sarge?

Hi Andreas, thank you very much for the tip. Following, as you suggested, the instructions in the section 3.8 of the apt-howto I was able to install linux-source-2.6.12 in may sarge system. The next step is to compile a fresh custom kernel. Only a minor question: what version of build-essential yo

Re: GRUB loader error message

hi ya jeremy On Sun, 2 Oct 2005, Jeremy Merritt wrote: more grub fun :-) > /dev/hdb2 is the location of /root/grub i assume you have a type and/or a system install problem -- what is the disk that windozed is installed on ( presumably hda ?? aka C: ) -- if you install

Re: playing midi with timiditySOLVED

On Sun, 02 Oct 2005, debian wrote: > On Fri, Sep 23, 2005 at 03:00:51AM -0700, Seeker5528 wrote: > > Since the script tells timidity to create an audio file from the midi > > then uses play to play back the audio it just seems odd that it would > > be an issue with timidity. > > I pulled the sourc

Re: apt-get: how to remove old config files?

On (02/10/05 17:37), Stefan Salewski wrote: > Hello, > > to remove a package completely I have to use something like > apt-get --purge remove packet. > If I forget option purge, config-files are not removed. > If I try > apt-get --purge remove packet > after > apt-get remove packet > to correct m

Re: apt-get: how to remove old config files?

Stefan Salewski: > > To remove old config files reinstallation of the packed > and subsequent removing with option --purge should work. > Is there a better way? You can 'dpkg --purge $package' at any time. $package doesn't have to be installed. J. -- I lust after strangers but only date people

one correction to previous message

/root/grub should be /boot/grub, of course. Tx __ Yahoo! for Good Donate to the Hurricane Katrina relief effort. http://store.yahoo.com/redcross-donate3/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a sub

GRUB loader error message

I was having trouble getting the grub loader to work on my machine after having to re-install Windoze XP. Finally I got the grub menu to come up but Debian will not load properly. /dev/hdb2 is the location of /root/grub The commands for loading Debian are listed as follows: root (hd1,1) ker

Re: [OT] Drawing a rectangle with Gimp

Mitja Podreka <[EMAIL PROTECTED]> writes: > Try GimpShop. It is still Gimp but the menus are like in Photoshop and > it runs in just one window. > http://plasticbugs.com/index.php?p=241 > Search the user comments for ports for different OS. Nice. Is anyone working on an official Debian package?

apt-get: how to remove old config files?

Hello, to remove a package completely I have to use something like apt-get --purge remove packet. If I forget option purge, config-files are not removed. If I try apt-get --purge remove packet after apt-get remove packet to correct my mistake apt-get complaints because packet is not installed. T

ipmasq odd behaviour in kernel 2.6.8 install

Hi everybody, I just installed debian sarge w/2.6 kernel on a computer that I use as a router. Quick facts has 1.5 Gb of RAM, Intel 845 board, P4 1.5 Ghz processor. Worked fine before I put a new install (old server fried so decided to use this one but wanted a bigger hard disk so installed fres

Exim4 & quote

Hi all, How I can to do to enable quote on exim4??? I have exim4-daemon-heavy Thanks Marco -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: how to play xvid movie using totem

cc wrote: hi, Is there anyone knows which package should be installed in order to play xvid movies ? Regards mplayer will do it. .deb packages fro mplayer can be found at ftp://ftp.nerim.net/debian-marillat/index.html In future to get more specific help, please mention about the dis

Re: How to list all files that are going to be installed when doing "apt-get upgrade"?

Thanks Paul, this also works great. I would like to know one last thing. The command I am using now: for i in $(apt-show-versions -u|awk '{split($1,a,"/"); print a[1]}'); do dpkg -L $i;done ouputs a list with all the files that are going to be installed on my system, but I would like to compare

how to play xvid movie using totem

hi, Is there anyone knows which package should be installed in order to play xvid movies ? Regards

Re: Sound on Opliplex GX150

am using DeMuDi alsaconf did everythang for me so expected the same at debian vo sound yet but a lot of hope is with us On Thu, Sep 29, 2005 at 05:00:00AM -0700, [EMAIL PROTECTED] wrote: > Hello, > > Does anyone have onboard sound working on a Dell Optiplex GX150? -- To UNSUBSCRIBE, email to [

Re: linux-source 2.6.12 in sarge?

On Sun, Oct 02, 2005 at 08:51:13AM -0300, Marcelo Chiapparini wrote: > Hello! > > I am running sarge with the standard debian kernel 2.6.8. I want to > install the new kernel 2.6.12, but the related package > linux-source-2.6.12 is in the unstable tree. How should I proceed? > (swiching to unstabl

Re: can't install postgresql Solved!

On Thu, Sep 29, 2005 at 11:51:02PM +0200, Csanyi Pal wrote: > Debian Sarge > > Before two month I play with jackd and Rosegarden with no success. > Before that I have installed postgresql. > Then I remove postgresql for some reason. > > Later I will to install again postgresql, but get the error

Re: linux-source 2.6.12 in sarge?

Hello Marcelo Chiapparini (<[EMAIL PROTECTED]>) wrote: > I am running sarge with the standard debian kernel 2.6.8. I want to > install the new kernel 2.6.12, but the related package > linux-source-2.6.12 is in the unstable tree. How should I proceed? > (swiching to unstable is not an option...) I

Basic question about recompiling program with different options

I'm using the VIM text editor and want to recompile it so that it can use Perl regular expressions when doing a search in a file. How do I do this easily? -- Dondley Communications http://www.dondleycommunications.com Communicate or Die: American Labor Unions and the Internet http://www.communic

Re: partimage-help

-- Sind unsere Computer und eMail sicher? Ihre Computerdateien können von jedem gelesen werden, der Zugriff auf Ihre Rechner hat. EMail ist notorisch unsicher. Die typische eMail wandert über viele Systeme. Die Personen, die diese Systeme betreiben können Ihre Nachrichten lesen, ko

Re: playing midi with timiditySOLVED

On Fri, Sep 23, 2005 at 03:00:51AM -0700, Seeker5528 wrote: > Since the script tells timidity to create an audio file from the midi > then uses play to play back the audio it just seems odd that it would > be an issue with timidity. I pulled the source down from the timidity home page and compile

test

test. Last mail didn't seem to get through. Fredrich Legnemark -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

maildir in evolution

Hello I am running sarge and Evolution 2.0.4 for emailing. Evolution stores the emails in the mbox format. I wonder if is it possible to use the maildir format instead. Google and the archives doesn't say anything about it. Thanks in advance for the help Marcelo -- Marcelo Chiapparini [EMAIL P

linux-source 2.6.12 in sarge?

Hello! I am running sarge with the standard debian kernel 2.6.8. I want to install the new kernel 2.6.12, but the related package linux-source-2.6.12 is in the unstable tree. How should I proceed? (swiching to unstable is not an option...) I've looked the archives and google and I didn't find anyt

Re: AMD64 with Debian

On Sat, Oct 01, 2005 at 08:33:50PM -0700, Jacob wrote: > Has anyone gotten Debian running on an AMD64 with PCI Express & Gigabit > Lan > I really would like to see some documentation or a tutorial so I can get > this stuff all up and running > > Hardware > >- AMD64 3200+ >- 1 Gig

Re: Sound on Opliplex GX150

On Thu, Sep 29, 2005 at 05:00:00AM -0700, [EMAIL PROTECTED] wrote: > Hello, > > I am running testing, with the 2.6.12-1-686 kernel, and have > tried both OSS and Alsa. With alsa-base installed hotplug > correctly loads the snd_intel8x0 module. If I remove alsa-base > and blacklist snd_intel8x0 the

Re: Sound on Opliplex GX150

On Thu, Sep 29, 2005 at 05:00:00AM -0700, [EMAIL PROTECTED] wrote: > Hello, > > Does anyone have onboard sound working on a Dell Optiplex GX150? > Mine is completely mute apart from the PC speaker. (It also has > no sound in Windows so this could be a hardware problem.) Does Windoze say there is

Re: Microphone Problem

On Sun, 02 Oct 2005 09:49:56 +1000, Glenn Meehan <[EMAIL PROTECTED]> wrote: > My microphone is not recording any sound. > I have a soundblaster live! 5.1 > I am using alsa. > It works under windows xp. > I am using kernel 2.6.8. with kde. Use something like aumix or kmixer to make sure that the m

XFree86 does not "find device" for a i915 chipset using the i810 driver

Dear Debian people, I can not get my XFree86 to work with the i810 driver, and tried for hours with various Google-based tips, so now I ask you. Problem: Only the VESA driver loads, and I can only work at 1024x768, while my LCD screen is a 1280x1024. Details: X does not start when I try to use

Re: how to start php

On (02/10/05 01:48), Eric P wrote: > To: debian-user@lists.debian.org > From: Eric P <[EMAIL PROTECTED]> > Date: Sun, 02 Oct 2005 01:48:47 -0500 > Subject: how to start php > > Hi all, > > Php4 was up and running. Then I tried out dotdeb's php5. Decided to > switch back to php4, but now php4 do

Re: What is the different between kernel-image and linux-image

On Wednesday 28 September 2005 12:10, Joseph Haig wrote: > --- Hendrik Boom <[EMAIL PROTECTED]> wrote: > > On Tue, Sep 27, 2005 at 09:40:57AM +0100, Joseph Haig wrote: > > > --- Tony Godshall <[EMAIL PROTECTED]> wrote: > > > > Debian is moving toward equality among kernels- hurd, bsd, > > > > and e

Re: Audio i/o

On Sat, Oct 01, 2005 at 03:01:31PM -0400, Roger Creasy wrote: > Interesting... I was following the advise of someone on a forum...Should I > undo my changes to permissions? If so, how? > > What is 'join #debian'? irc chat at irc.debian.org, #debian is a channel. You can use bitchx, or xchat, or i

Re: GNOME "other" menu

"Titus Barik" <[EMAIL PROTECTED]> wrote in message news:[EMAIL PROTECTED] > Thomas Jollans wrote: > > How long ago are you talking about ? > > I do have an 'Other' menu, but it contains only Celestia (which I have > > installed in the gnome version) > > Hi Thomas, > > For example, when I use Fluxb