Une solution serait d'utiliser un boot loader (Grub par exemple, ou
Syslinux), d'installer sur ta clef chaque image ISO, ainsi que le noyau
et initrd correspondant, et de démarrer sur le bon noyau/initrd pour
chaque type d'installeur. Malheureusement, l'installeur Debian ne
permettait pas de
Bonjour,
Pour faire court car c'est un peu urgent, tout le monde sait avec
Samba mettre à disposition des utilisateurs un partage en lecture
seule en mode 'guest', et un partage en lecture écriture avec une
liste d'utilisateurs/groupes valides.
J'ai besoin d'un mixe des deux : que tout le monde
Bonjour Olivier,
Patrice OLIVER wrote:
Bonjour,
Pour faire court car c'est un peu urgent, tout le monde sait avec
Samba mettre à disposition des utilisateurs un partage en lecture
seule en mode 'guest', et un partage en lecture écriture avec une
liste d'utilisateurs/groupes valides.
J'ai
'lut,
j'utiliserais ceci:
writeable=no
#valid users = tout le monde par défaut
write list = @groups_de_mes_users_autorises_a_ecrire
f.
Patrice OLIVER wrote:
Bonjour,
Pour faire court car c'est un peu urgent, tout le monde sait avec
Samba mettre à disposition des utilisateurs un partage en
Szanowni Panstwo,W zwiazku z ustawa z dnia 18 lipca 2002 roku o swiadczeniu
uslug droga elektroniczna (Dz. U. Nr 144 z 9 wrzesnia 2002 r., poz. 1204),
chcialbym uzyskac zgode na przeslanie rozwiazan kredytowych Deutsche Bank,
dotyczacych kredytu konsolidacyjnego i gotówkowego do 130 000 PLN
Witam!
Skąd wziąć stare wersje pakietów? Próbowałem snapshot.debian.net ale
wygląda na to, że to archiwum jest nieaktualizowane od kilku lat. Ma
ktoś jakiś pomysł? Nie chodzi o pakiety ze starych dystrybucji, lecz z
bieżącej stabilnej albo testowej.
--
http://miki.menek.one.pl m...@menek.one.pl
Dnia 17.02.2010 15:46 użytkownik tower napisał :
Witajcie
Szukam jakiejs paczki, która po 3 nieudanych probach logowania na ssh
zablokuje ip delikwenta. Można to zrobić na iptables, ale domyślam się,
ze uda się to skonfigurować w inny sposób.
Polecam sshguard i denyhosts. Tego drugiego
Emesene te puede llegar a servir, el link es: http://www.emesene.org
Saludos
--
Blog: http://www.pascalizado.com.ar
--
To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive:
Norma Angelica Ruiz Servin escribió:
Hola de new :)
Ya estuve viendo en Google pero solo hacer referencia al uso del
subdirectorio /opt mhhh...pero para que sirve ese subdirectorio?
Ahí es donde se tienen que poner los subdirectorios de los programas
que quieres instalar?
En este
ceduardo escribió:
Otra idea es poder hacer alta disponiblidad entre máquinas virtuales
ubicadas en servers diferentes. La pregunta es si habrá alguna solución
donde el monitoreo de las máquinas virtuales y la HA las haga el software
de virtualización
Gracias y saludos
Explicate mas
2010/3/7 Camaleón noela...@gmail.com:
El Sun, 07 Mar 2010 14:37:29 -0300, Jose Damian Garrido Muñoz escribió:
es posible quotear un disco duro externo para que diferentes personas
puedan usar un espacio en este? de ser posible, cuales son las cosas que
debería buscar para poder realizar esto.
saludos amigos buen día, resulta que ando implementando un proxy
transparente en mi squid he implementado .. http_port x.x.x.x:3128
transparent , y lo ando manejando el firewall con FIREHOL y me va super
bien!! .. ahora en mi firehol he implementado así: transparent_proxy 80
8080 3128 3128
Hola a todos..
Tengo mis dudas y esperoq ue me ayuden,,
yo debo darle cuenta UUCP o VPop a los usuarios externos para que
ellos le den servicio de correo a otros clientes,, normalmente en
windows eso es facil, pero el linux, es algo distinto
alguine me puede ayudar??
--
To UNSUBSCRIBE, email
Hola lista, tengo pensado mudar mi sistema de 32 bits a 64bits,
quisiera saber según sus experiencias las ventajas y desventajas que
posee. y por otro lado segun googleé hay una libreria que permite
ejecutar ejecutables de 32 bits. ¿Que tal funciona?
Desde ya valoró mucho sus experiencia y
Estimados:
Luego de haberme vuelto medianamente loco en la configuración de la
placa inalámbrica (hay un hilo por ahí mío), ahora ya no sé qué hacer
con la configuración del enlace en sí mismo.
Paso a comentarles que la placa levanta perfectamente y obtengo una
dirección IP de parte del
El 08/03/10 12:51, Javier Argentina escribió:
Estimados:
Luego de haberme vuelto medianamente loco en la configuración de la
placa inalámbrica (hay un hilo por ahí mío), ahora ya no sé qué hacer
con la configuración del enlace en sí mismo.
Paso a comentarles que la placa levanta perfectamente y
El Mon, 08 Mar 2010 17:32:43 +0100, Yosvany Hechavarria Infante escribió:
Tengo mis dudas y esperoq ue me ayuden,, yo debo darle cuenta UUCP o
VPop a los usuarios externos para que ellos le den servicio de correo a
otros clientes,, normalmente en windows eso es facil, pero el linux, es
algo
El Mon, 08 Mar 2010 14:38:38 -0300, ,_(º Alejandro Lucas escribió:
Hola lista, tengo pensado mudar mi sistema de 32 bits a 64bits, quisiera
saber según sus experiencias las ventajas y desventajas que posee. y por
otro lado segun googleé hay una libreria que permite ejecutar
ejecutables de 32
El Sun, 07 Mar 2010 17:27:27 -0300, debian escribió:
Creo que le falta un poco de humildad a este cubano de mierda
Este comentario está completamente fuera de lugar :-/
Qué opinan..?
Que deberías disculparte.
Saludos,
--
Camaleón
--
To UNSUBSCRIBE, email to
El Mon, 08 Mar 2010 14:51:45 -0300, Javier Argentina escribió:
(...)
wlan0 IEEE 802.11bg ESSID:dd-wrt
(...)
Link Quality=38/70 Signal level=-72 dBm Rx invalid
^^
De wifi te puedo comentar poco, pero ese valor de link quality parece
muy bajo. Es
El 08/03/10, Camaleón noela...@gmail.com escribió:
¿Qué características tiene tu equipo (ram/micro) y qué utilidad piensas
darle (entorno de escritorio, servidor, etc...) o qué programas/servicios
piensas utilizar?
Es una notebook con procesador intel Core 2 duo T5750 con 2 gb ram, mi
idea es
El 08/03/10, Camaleón noela...@gmail.com escribió:
No vas a notar diferencia alguna entre un sistema de 32 bits o de 64
salvo que el equipo vaya a ejecutar alguna tarea que se beneficie de la
arquitectura (procesamiento de video/3d o bdd).
De esto puedo deducir que me viene al pelo para
El Mon, 08 Mar 2010 15:35:45 -0300, ,_(º Alejandro Lucas escribió:
El 08/03/10, Camaleón escribió:
¿Qué características tiene tu equipo (ram/micro) y qué utilidad piensas
darle (entorno de escritorio, servidor, etc...) o qué
programas/servicios piensas utilizar?
Es una notebook con
Muchas gracias amigos, a seguir entonces con los 32 bits.
Un fuerte saludo
Alejandro
--
Blog: http://www.pascalizado.com.ar
--
To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive:
El Mon, 08 Mar 2010 15:39:17 -0300, ,_(º Alejandro Lucas escribió:
El 08/03/10, Camaleón noela...@gmail.com escribió:
No vas a notar diferencia alguna entre un sistema de 32 bits o de 64
salvo que el equipo vaya a ejecutar alguna tarea que se beneficie de la
arquitectura (procesamiento de
El lun, 08-03-2010 a las 11:05 -0500, Leonel Hernández Grandela
escribió:
saludos amigos buen día, resulta que ando implementando un proxy
transparente en mi squid he implementado .. http_port x.x.x.x:3128
transparent , y lo ando manejando el firewall con FIREHOL y me va super
bien!! ..
Actualización sobre la.
Ley de Adquisiciones, Arrendamiento y Servicios
19 de Marzo de 2010 México D.F.
22 de Marzo de 2010 Guadalajara, Jalisco.
PMS de México le presenta este exclusivo seminario, el presente programa está
basado en el Decreto (DOF-28/05/2009), por el que se reforman,
El día 8 de marzo de 2010 15:13, Camaleón noela...@gmail.com escribió:
El Sun, 07 Mar 2010 17:27:27 -0300, debian escribió:
Creo que le falta un poco de humildad a este cubano de mierda
Este comentario está completamente fuera de lugar :-/
Qué opinan..?
Que deberías
Norma Angelica Ruiz Servin escribió:
El día 4 de marzo de 2010 19:21, Norma Angelica Ruiz Servin
norma_ruiz_ser...@msn.com escribió:
Hola :)
En la instalación de Debian, en Configurar el reloj, Selecciones su zona
horaria, solo aparecen 3 opciones:
Central (Manitoba...
Alberta - Territorios
El día 8 de marzo de 2010 14:59, Leonel Hernández Grandela
maxpa...@filialfcm.ssp.sld.cu escribió:
y si le añades el gateway en al config de la inhalambrica? la cual imagino
sea la misma IP del router? saludos
El enrutamiento por defecto está correcto como se puede ver en
Enrutamiento:
# ip
Para explicarme mejor..
En Windows, usaba el clasico Mdaemon un servidor de correo magnifico,
pero limitado a la hora de enfrentarse a muchas solicitudes de correo,
en el hacia puertas de enlaces para otras dependencia de mi empresa,
estaba a cientos de kilometros, ellos distribuian y creaban
El 8 de marzo de 2010 07:48, Federico Alberto Sayd fs...@uncu.edu.ar escribió:
ceduardo escribió:
Otra idea es poder hacer alta disponiblidad entre máquinas virtuales
ubicadas en servers diferentes. La pregunta es si habrá alguna solución
donde el monitoreo de las máquinas virtuales y la
El día 8 de marzo de 2010 16:21, Yosvany Hechavarria Infante
yos...@gmail.com escribió:
Para explicarme mejor..
En Windows, usaba el clasico Mdaemon un servidor de correo magnifico,
Es magnifico o es sarcasmo, ¿por ques si estan bueno para que
preguntar por posfix?
pero limitado a la hora de
El 08/03/10 14:19, gonzalo rivero escribió:
El lun, 08-03-2010 a las 11:05 -0500, Leonel Hernández Grandela
escribió:
saludos amigos buen día, resulta que ando implementando un proxy
transparente en mi squid he implementado .. http_port x.x.x.x:3128
transparent , y lo ando manejando el
El lun, 08-03-2010 a las 18:47 -0500, Leonel Hernández Grandela
escribió:
El 08/03/10 14:19, gonzalo rivero escribió:
El lun, 08-03-2010 a las 11:05 -0500, Leonel Hernández Grandela
escribió:
saludos amigos buen día, resulta que ando implementando un proxy
transparente en mi squid
El 07/03/2010 15:31, deb...@mstaaravin.com.ar escribió:
2010/3/6 juan isla...@infomed.sld.cu:
Creo que le falta un poco de humildad a este cubano de mierda
Qué opinan..?
Me olvidaba...
Por favor son 2 palabras utilizadas universalmente generalmente
despues tambien se
El 07/03/2010 17:29, deb...@mstaaravin.com.ar escribió:
2010/3/7 serpeanetto serpeane...@yahoo.com:
Y a vos te hace falta dar la cara con una identidad humana para juzgar y
corregir acciones humanas; y leer mejor, porque el compañero agradeció en
las últimas líneas de su mensaje.
Si te
Creo que le falta un poco de humildad a este cubano de mierda
Qué opinan..?
compa... y usted parece que está afectado por un poco de xenofobia a los
cubanos ... o será a los novatos?
perdonen el OT...
--
Paradix ;)
Haciendo abogacía por el software libre adonde voy
--
Paradix ;) escribió:
El 07/03/2010 17:29, deb...@mstaaravin.com.ar escribió:
2010/3/7 serpeanettoserpeane...@yahoo.com:
Y a vos te hace falta dar la cara con una identidad humana para juzgar y
corregir acciones humanas; y leer mejor, porque el compañero agradeció en
las últimas
buenas noches amigos,, necesito una peque ayuda, quisiera saber como
tendría que hacer para que mi sesión de Linux entrara automáticamente
sin necesidad de password y ha otra cosa , también se me bloquea cuando
se activa el refrescador de pantalla, es qe lo necesito es un poco
tedioso tener que
El 07/03/10 14:42, juan escribió:
buenas noches amigos,, necesito una peque ayuda, quisiera saber como
tendría que hacer para que mi sesión de Linux entrara automáticamente
sin necesidad de password y ha otra cosa , también se me bloquea cuando
se activa el refrescador de pantalla, es qe lo
hola amigos, me tropezado nuevamente con algo que pasa con los bichos o
virus de Windows y quisiera remediarlo con Linux, he insertado mi
memoria flash de 4Gby en la PC de mi trabajo que lo que tiene como
sistema operativo es Windows XP sp2, pero tenia un bichito, y me oculto
una carpeta de
disculpen ya solucione el detalle, como uso Gnome entre a
Sistema-Administracion-Ventana de entrada y una vez alli en la solapa
Seguridad activas la casilla entrada automatica, gracias a todos y
disculpen es que pense que era mas dificil que eso.
El dom, 07-03-2010 a las 21:10 +0100, juan
From: glicer...@gmail.com
Date: Mon, 8 Mar 2010 00:11:38 +0100
Subject: Re: Alternativas a VMWare ESX
CC: debian-user-spanish@lists.debian.org
To: debian-user-spanish@lists.debian.org
2010/3/5 fs...@uncu.edu.ar
Las preguntas son:
¿Cuánto de esto se puede hacer con Xen, KVM, OpenVZ?
hola amigos hace unos dias hable acerca del problema solo 1 respuesta y
no resuelvo aun el problema por favor si alguien sabe como arreglar y
lograr que mi skype conecte a la internet seria yo feliz .. resulta que
en la instalacion de las dependencias tuve 1 fallo electrico .. pero ya
creo he
Hum..
Nao tem tela de fundo...
Edite o arquivo /etc/motd e /etc/issue
e coloque a informação que quiser,
se não me engando tem um serviço e sempre verifica se mudaram esses arquivos
dai vc tem que abrir o serviço com um editor e comentar a linha que fazem
referências aos arquivos de cima.
Abraço
Olá,
Instalei o Nagios 3 no Debian 5 stable... e usando
http://127.0.0.1/nagios , o navegador não consegue exibir a página e
abre-se uma caixa de download do arquivo no Firefox, identificado com
o MIME:
application/x-httpd-php
Se, porém, eu digito http://127.0.0.1/nagios/index.php , a página
Pessoal,
uso o kmail para gerenciar minhas contas e este já conta com mais de 100.000
mensagens. Quando mando fazer uma procurar, ele demora mas acha. Mas depois
desta procurar ele fica um tempão detonando o processamento. Acredito que esta
demora seja para compactar as pastas (não sei como
Leia sobre DirectoryIndex no Apache
Leonardo Andrade wrote:
Olá,
Instalei o Nagios 3 no Debian 5 stable... e usando
http://127.0.0.1/nagios , o navegador não consegue exibir a página e
abre-se uma caixa de download do arquivo no Firefox, identificado com
o MIME:
application/x-httpd-php
Umarzuki Mochlis schreef:
Assuming Debian Lenny's installer will detect a Ubuntu 10.04 (daily
build) partition in my PC (debian = /dev/sda1, ubuntu = /dev/sda3), i
installed Lenny on sda1 but Ubuntu entry does not show up on GRUB.
# grub-install -v
grub-install (GNU GRUB 0.97)
so i proceed
Hello - I'm a newbie to Linux and have so far enjoyed the installation
and learning.
I insalled Lenny last week and now want to install support for the
Eaton Powerware 5110 UPS I have. It uses a USB connection.
The problem is that I can't do an apt-get install nut as the package
is not
I'm not sure I understand your question. Are you saying that the
installer does not recognize existing partitions already on the hard
disk? Or are
you saying that it won't let you create more than five partitions during
installation? Or are you saying that only five different mount
On 2010-03-07 03:55, Cecil Knutson wrote:
[snip]
Is it right to see LVM as software to combine several HD's? Does it
have any use with respect to a single 1.5TB HD?
Yes. At some point, if you run out of space on that device, simple
add another disk to your existing single-disk LV
On 2010-03-07 23:12, Data wrote:
Hello - I'm a newbie to Linux and have so far enjoyed the installation
and learning.
I insalled Lenny last week and now want to install support for the
Eaton Powerware 5110 UPS I have. It uses a USB connection.
The problem is that I can't do an apt-get
On Mon, 08 Mar 2010 16:12:50 +1100, Data wrote:
(...)
The problem is that I can't do an apt-get install nut as the package
is not found. Nor is nut-dev. Its been a bit frustrating as so many
googled pages talk about just doing the apt-get install nut yet for me
it does not load
Package
DVI supports both digital and analgue connections (that's how VGA
adaptors work). I have a user who fought with his Windows drivers to
force digital connection, even though he was connecting with the DVI
ports over a DVI cable it was sending analogue until he configured it
properly. Not that he is
On Dom, 07 Mar 2010, Stan Hoeppner wrote:
Ron Johnson put forth on 3/7/2010 1:33 AM:
AKA /argumentum ad Hitlerum/. Hitler was a vegetarian, so vegetarianism
is wrong.
It's probably very safe to say you just lost any respect you had on this
list by using a Hitler analogy. The analogy wasn't
Hi,
debconf is an infrastructure where a package ask configuration question
to the sys admin. There are few different front end for sys admin to
interact with debconf.
On Sun, Mar 07, 2010 at 10:58:18PM -0800, vikram wrote:
hi,
I am studying the Debian package management system. I am
On Sun, Mar 07, 2010 at 09:58:43PM -0600, Mark Allums wrote:
Earlier, I wrote what I think was a confusing reply to this.
...
o QEMU is emulation.
o Virtualbox is Full virtualization.
o QEMU+KVM is a funny beast, it is paravirtualization with kernel
virtualization, you need hardware CPU
On Mon, 08 Mar 2010 12:59:13 +0200, Dotan Cohen wrote:
DVI supports both digital and analgue connections (that's how VGA
adaptors work).
That's DVI-I, I guess.
I have a user who fought with his Windows drivers to
force digital connection, even though he was connecting with the DVI
ports
Package: linux-image-2.6.32-2-686
hello,
I have upgraded kernel to 2.6.32-2-686 from 2.6.26-2-686.
After that, when I boot my laptop (debian lenny) I get the error about no write
access to /home.
It's mounted with rw options, reiserfs and it's encrypted from
/dev/mapper/dat-home.
After
Olaf Reitmaier Veracierta wrote:
No pics are allowed on this list.
Sorry I didn't know that. So, for the future if I need to display an
image what is the solution?
Maybe misconfigured swap.
I can't go to terminal or X.
Ok, on GRUB boot menu, type e add option noswap, then boot with
Martin Kraus wrote:
My question is, why there are two apparently identical qemu packages. Which
one should I use with kvm.
** I didn't take the time to check that out, so I may be wrong **
The kvm userspace utility is in fact a modified qemu which takes advantage
of hardware tech via the kvm
On Mon, Mar 08, 2010 at 01:41:54PM +0100, Martin Kraus wrote:
On Sun, Mar 07, 2010 at 09:58:43PM -0600, Mark Allums wrote:
Earlier, I wrote what I think was a confusing reply to this.
In Debian
Squeeze, there are two packages for qemu, one named qemu, the other qemu-kvm.
Both are based on
Tell the user to use a DVI-D to DVI-D (only digital) cable :-)
He is using the cable that came with the monitor.
Is there no way to tell which type of connection is being used? For
whatever reason, it is important to him to know that the connection is
digital.
--
Dotan Cohen
http://bido.com
On Seg, 08 Mar 2010, Dotan Cohen wrote:
Is there no way to tell which type of connection is being used? For
whatever reason, it is important to him to know that the connection is
digital.
I might be saying complete bullshit, but do DVI cables carry tha
analog signal? It's true the connectors
On Mon, Mar 8, 2010 at 8:53 AM, Eduardo M KALINOWSKI
edua...@kalinowski.com.br wrote:
On Seg, 08 Mar 2010, Dotan Cohen wrote:
Is there no way to tell which type of connection is being used? For
whatever reason, it is important to him to know that the connection is
digital.
I might be saying
Hi all,
I recently wrote a small content filter script (in bash) to use on my
local Postfix installation. The script receives via pipe: the
recipient and the sender's addresses then responds by sending back a
message containing some body text and an image attachment.
It works as it is supposed to
On Mon, 08 Mar 2010 15:47:07 +0200, Dotan Cohen wrote:
Tell the user to use a DVI-D to DVI-D (only digital) cable :-)
He is using the cable that came with the monitor.
Can't he get a new one? Or at least, can't he determine what type of
cable is it? DVI-I, DVI-D... I find that a hardware
On 8.3.2010 15:53, Raven wrote:
Hi all,
I recently wrote a small content filter script (in bash) to use on my
local Postfix installation. The script receives via pipe: the
recipient and the sender's addresses then responds by sending back a
message containing some body text and an image
On Mon, 08 Mar 2010 14:17:19 +0100
godo go...@dobosevic.com wrote:
Olaf Reitmaier Veracierta wrote:
No pics are allowed on this list.
Sorry I didn't know that. So, for the future if I need to display an
image what is the solution?
Not sure about this. The CoC merely states:
# Avoid
Dotan Cohen wrote:
Tell the user to use a DVI-D to DVI-D (only digital) cable :-)
He is using the cable that came with the monitor.
Is there no way to tell which type of connection is being used? For
whatever reason, it is important to him to know that the connection is
digital.
Check this
Hello
I have a Lenny server with two ethernet interfaces which is NFS CLIENT
to a NETAPP filer
I wonder if it would be possible to force NFS traffic to/from the filer
on one ethernet interface and use the other interface for all other
traffics ?
like the following
eth0 --OTHER
On Mon, Mar 08, 2010 at 10:27:42PM +0900, Osamu Aoki wrote:
On Mon, Mar 08, 2010 at 01:41:54PM +0100, Martin Kraus wrote:
On Sun, Mar 07, 2010 at 09:58:43PM -0600, Mark Allums wrote:
Earlier, I wrote what I think was a confusing reply to this.
In Debian
Squeeze, there are two packages
On 8-3-2010 14:53, Raven wrote:
Anyone knows how to solve this?
Thanks
Why don't you just BASE64 the attachment and set the proper mime-type?
You might still be able to use uuencode, but setting a mime-type seems
mandatory to me, because else the mail client has to guess what the
attachment
Thanks for all the responses. I'd like to leave Windows alone, therefore
using NTFS has attractions over trying to use ext2. I think I'll try using
it in place of FAT32 / VFAT in Linux using ntfs-3g and see how it goes. I'm
using Debian Lenny 64 bit on a quad core processor so I'm hoping that
On Mon, Mar 08, 2010 at 02:53:38PM +0100, Raven wrote:
To encode the image I use:
/usr/bin/uuencode img.jpg img.jpg attachment.txt
cat hdr.txt body.txt attachment.txt message.txt
$SENDMAIL -f $4 -- $2 message.txt
Anyone knows how to solve this?
As the others have mentioned, you should
On Sun, Mar 07, 2010 at 21:11:29 -0500, A. Costa (agco...@gis.net) wrote:
Bash isn't strictly needed, plain Bourne shell works, using parameter
substitution
[...]
Thank you for you time and trouble. As it happens, I did in fact
upgrade this lenny box to use bash version 4.1-1 and all is
Any recommendations for one that
works under Linux?
-ishwar
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/pine.gso.4.64.1003081225150.27...@cps155.cps.cmich.edu
On 3/8/2010 6:41 AM, Martin Kraus wrote:
On Sun, Mar 07, 2010 at 09:58:43PM -0600, Mark Allums wrote:
Earlier, I wrote what I think was a confusing reply to this.
...
o QEMU is emulation.
o Virtualbox is Full virtualization.
o QEMU+KVM is a funny beast, it is paravirtualization with kernel
Ron Johnson wrote:
On 2010-03-07 03:55, Cecil Knutson wrote:
[snip]
Is it right to see LVM as software to combine several HD's? Does it
have any use with respect to a single 1.5TB HD?
Yes. At some point, if you run out of space on that device, simple add
another disk to your existing
On Thu, 04 Mar 2010 13:55:54 +, Camaleón wrote:
On Wed, 03 Mar 2010 22:21:48 -0600, Stan Hoeppner wrote:
Camaleón put forth on 3/3/2010 8:50 AM:
Stan, please, let's calm down.
I'll try again to contact Cosme and explain him the situation. I don't
think he is fully aware of his
For a/b/g the Alfa AWUS036H has good support and the (last I checked)
the top performing usb card out there. It uses the rtl8187 driver and
should work out-of-the-box with the stock Debian kernel. If you want
the N version of the same card, it will require the rtl8187se. This
will take a bit more
On Sun, 7 Mar 2010 04:55:38 -0500 (EST), Cecil Knutson wrote:
Stephen Powell wrote:
I'm not sure I understand your question. Are you saying that the
installer does not recognize existing partitions already on the hard
disk? Or are
you saying that it won't let you create more than five
On Sat, Mar 06, 2010 at 08:19:40PM +0100, MList wrote:
When I set mark with C-SAPCE and then move cursor with
C-f C-b M-f M-b C-n C-p there is blue backgroun and
transient-mark-mode work as I am used to. But if I move
cursors with arrow keys or when I use C-x C-x to exchange
cursor and mark
On Sun, 07 Mar 2010 15:39:33 -0500, twixt wrote:
Follow up: When the wvdial error occurs, a popup window tells me the
kernel failed.
No need to open a new thread. You can add more information on the
original one, unless you change the whole topic :-)
(...)
Mar 7 06:38:24 localhost
I'm running Lenny on a PC. When I try to use totem to display a .mpg
file I get the fpllowing;
epc_publisher_create_server: listening on http://peace:58293/
** (totem:12145): DEBUG: Init of Python module
** (totem:12145): DEBUG: Registering Python plugin instance: YouTube
+TotemPythonPlugin
**
On 03/08/2010 10:05 PM, John Salmon wrote:
I'm running Lenny on a PC. When I try to use totem to display a .mpg
file I get the fpllowing;
epc_publisher_create_server: listening on http://peace:58293/
** (totem:12145): DEBUG: Init of Python module
** (totem:12145): DEBUG: Registering Python
Hi,
I use iTunes on a Mac to host my very large music library. I want to share this
music over DAAP to my Debian box (dont really care what client i use, Rhythmbox
or Banshee or Songbird is all fine), but the iTunes version encrypts it so you
cant use it with non-iTunes clients.
Is there a
I might be saying complete bullshit, but do DVI cables carry tha analog
signal? It's true the connectors in VGA boards have both signals, but
shouldn't a standard DVI cable only transmit the digital signal and ignore
the analog part, which is used only when a DVI-VGA adaptor is used?
On 8 March 2010 16:16, Camaleón noela...@gmail.com wrote:
On Mon, 08 Mar 2010 15:47:07 +0200, Dotan Cohen wrote:
Tell the user to use a DVI-D to DVI-D (only digital) cable :-)
He is using the cable that came with the monitor.
Can't he get a new one? Or at least, can't he determine what
Check this pic:
http://www.playtool.com/pages/dvicompat/sldldvi.jpg
I had no idea it was such a mess! Three different types of DVI?!? One
for D, one for V, one for I?!?
--
Dotan Cohen
http://bido.com
http://what-is-what.com
Please CC me if you want to be sure that I read your message. I
On Mon, Mar 08, 2010 at 11:31:54AM -0600, Mark Allums wrote:
This is a better question, and will get better replies. My replies
were general, and you had something specific in mind. It pays to be
specific. I can tell you about virt tech, though in my
scatterbrained way, I will misuse the
Dr. Jennifer Nussbaum wrote:
Hi,
I use iTunes on a Mac to host my very large music library. I want to share
this music over DAAP to my Debian box (dont really care what client i use,
Rhythmbox or Banshee or Songbird is all fine), but the iTunes version encrypts
it so you cant use it with
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Stan Hoeppner wrote:
http://www.debian-administration.org/articles/388
Based on all testing done for this benchmark essay, XFS appears to be the
most appropriate filesystem to install on a file server for home or
small-business needs :
* It
Clive McBarton put forth on 3/8/2010 3:29 PM:
That benchmark/article is from 2006 though, and the references are from
2003 and 2006. The hard disks are PATA and slow (100 and 133). Are there
any newer benchmarks?
I'm constantly Googling trying to find new ones. Apparently (and
--- On Mon, 3/8/10, tv.deb...@googlemail.com tv.deb...@googlemail.com wrote:
From: tv.deb...@googlemail.com tv.deb...@googlemail.com
Subject: Re: DAAP server for OS X or Debian?
To: debian-user@lists.debian.org
Date: Monday, March 8, 2010, 1:26 PM
Dr. Jennifer Nussbaum wrote:
Hi,
I
On Mon,08.Mar.10, 12:59:13, Dotan Cohen wrote:
DVI supports both digital and analgue connections (that's how VGA
adaptors work). I have a user who fought with his Windows drivers to
force digital connection, even though he was connecting with the DVI
ports over a DVI cable it was sending
When I ran Ubuntu it seemed to automatically setup fonts or whatever
so that if I used the web or gedit I could view and copy/paste Arabic,
Chinese, Hebrew etc. I didn't have to set anything up. Yet in Debian
these languages appear as a bunch of gibberish. I am running Debian
squeeze, how do I
When I ran Ubuntu it seemed to automatically setup fonts or whatever
so that if I used the web or gedit I could view and copy/paste Arabic,
Chinese, Hebrew etc. I didn't have to set anything up. Yet in Debian
these languages appear as a bunch of gibberish. I am running Debian
squeeze, how do
1 - 100 of 160 matches
Mail list logo