Le samedi 13 décembre 2014 à 21:31 +0100, maderios a écrit :
On 12/13/2014 04:24 PM, Yann COHEN wrote:
Et cette option de debug?
apt-get -o debug::pkgproblemresolver=true dist-upgrade
Bonjour,
Pas mieux.
root@sky:~# apt-get -o debug::pkgproblemresolver=true dist-upgrade
Le samedi 13 décembre 2014 à 16:36 +0100, Michel a écrit :
Le 13/12/2014 16:30, Yann COHEN a écrit :
root@sky:~# apt-get -o debug::pkgproblemresolver=true dist-upgrade
Lecture des listes de paquets… 0%
Question peut-être sans importance, mais as-tu une activité processeur
Bonjour,
Comme cela t'a été conseillé, essaie d'utiliser strace ... on a pas vu
de réponse à cette proposition.
Si strace n'est pas installé sur ta machine, récupères le .deb 'à la main'
dans les dépôts debian, décompresse et met le fichier binaire dans un
dossier bin référencé dans $PATH, puis
Le Sat, 13 Dec 2014 16:50:02 +0100, Yann COHEN a écrit :
Cela fait deux clé que je teste sur la framboise et dans le deux cas
j'ai le même phénomène dans les traces 'nl80211' generic netlink not
found
a voir sur le forum français de raspberry :
Le Sat, 13 Dec 2014 16:50:02 +0100, Yann COHEN a écrit :
Cela fait deux clé que je teste sur la framboise et dans le deux cas
j'ai le même phénomène dans les traces 'nl80211' generic netlink not
found
Cela ne semble pas venir du firmware...
va sur les forums raspberrypi.org
il y en a un
Bonjour,
Le problème ne vient pas du raspberry sous debian, mais de la
configuration de wpa_supplicant.
Et plus exactement fait de mon idiotie : je ne suis trompé sur
l'écriture du ssid en mettant des majuscules où il n'en a pas !
Désolé pour le bruit...
--
Yann COHEN y...@ianco.org
ianco
Bonjour,
Sur une wheezy amd64, il y a déjà quelques mois déjà que gftp plante des
que l'on se connecte à un serveur. Je me suis dit que ça s'arrangerait à
la prochaine mise à jour, et j'ai utilisé mc à la place. Les messages
qu'il donne ( si on le lance depuis une console ) sont:
Oups désolé pour le retard, mais le déjeuner du dimanche midi...
voici les dernières lgnes de strace sur la commande
./strace apt-get -o debug::pkgproblemresolver=true dist-upgrade
open(/var/cache/apt/srcpkgcache.bin, O_RDONLY|O_LARGEFILE) = 6
fcntl64(6, F_SETFD, FD_CLOEXEC) = 0
Bonjour,
Le dimanche 14 décembre 2014, Yann COHEN a écrit...
Oups désolé pour le retard, mais le déjeuner du dimanche midi...
voici les dernières lgnes de strace sur la commande
./strace apt-get -o debug::pkgproblemresolver=true dist-upgrade
Il faudrait lancer strace avec l'option
Bonjour,
Je ne suis pas sûr de le comprendre, cependant j'ai coupé l'exécution
car la trace ne faisait qu'augmenter avec le même message d'erreur me
semble-t-il.
Yann.
Le dimanche 14 décembre 2014 à 19:05 +0100, Jean-Michel OLTRA a écrit :
Bonjour,
Le dimanche 14 décembre 2014, Yann
Bonjour,
Le lundi 15 décembre 2014, Yann COHEN a écrit...
Je ne suis pas sûr de le comprendre, cependant j'ai coupé l'exécution
car la trace ne faisait qu'augmenter avec le même message d'erreur me
semble-t-il.
Je viens de tester, chez moi :
strace -f -o strace.log aptitude update
On 12/12/2014 10:38 AM, Yann COHEN wrote:
J'ai supprimé le fichier de
lock/var/lib/dpkg/lock.
C'est peut-être là le nœud de l'affaire
= commence par (re)créer le fichier vide /var/lib/dpkg/lock
permissions root root
chmod 640
--
Maderios
--
Lisez la FAQ de la liste avant de poser une
Pues eso me dice synaptic desde las ultimas actualizaciones realizadas a
Jessie.
Normalmente, cuando me ha pasado con librerías, las he desinstalado sin
más, sin problemas aparentes...
Sin embargo, con estos no me atrevo... No sé si es que gnome va a
sustituir estos programas o que, pero me
El Sat, 13 Dec 2014 14:31:04 -0430, Miguel Matos escribió:
El día 13 de diciembre de 2014, 14:00, Camaleón noela...@gmail.com
escribió:
El Fri, 12 Dec 2014 22:36:49 -0430, Miguel Matos escribió:
Saludos a la lista y la gente más lista también. :-D
Ahorita he decidido retomar de nuevo la
El Sun, 14 Dec 2014 13:15:22 +0100, Eduardo Rios escribió:
Pues eso me dice synaptic desde las ultimas actualizaciones realizadas a
Jessie.
Acostumbraros a incluir los mensajes que os devuelven las aplicaciones,
es importante saber de qué se queja o qué quiere hacer exactamente
aptitude.
El Sat, 13 Dec 2014 10:50:14 -0500, Lic. Manuel Salgado escribió:
Te corrijo el top-posting y edito el asunto para reflejar el cambio de
tema.
El 6/12/14, Camaleón noela...@gmail.com escribió:
El Fri, 05 Dec 2014 16:00:17 -0500, Lic. Manuel Salgado escribió:
Alguien me podria ayudar en mi
El Sat, 13 Dec 2014 13:54:56 -0600, AbeL escribió:
Ahora que ya sabes cómo enviar los mensajes en texto plano sólo te queda
saber cómo evitar el top-posting, es decir, cómo responder *debajo* de
los mensajes no arriba, como haces. si tienes alguna dificultad para
hacerlo entonces no se sí
Hola lista,
Recurro a ustedes como ultimo recurso.
Tengo varios pc con Linux debian 3.2.0-4-686-pae, en ellos conecto un adaptador
bluetooth y con el paquete bluez-utils y ussp-push puedo enviar archivos al
movil y viceversa, mediante consola sin problemas, y sin PIN, en el móvil
solamente
Buenas tardes lista, necesito alguna opción para que mis usuarios
tengan la alternativa de cambiar sus claves de correos (alojadas en
mysql) a partir de la verificación de la anteriorigual me sirve,
un formulario donde los diferentes los admins de los dominios puedan
hacer cambios en las
El domingo, 14 dic 2014, a las 18:58 horas (UTC+1),
Aaron Cygnus escribió:
Buenas tardes lista, necesito alguna opción para que mis usuarios
tengan la alternativa de cambiar sus claves de correos (alojadas en
mysql) a partir de la verificación de la anteriorigual me sirve,
un formulario donde
El Sun, 14 Dec 2014 17:24:34 +, franiortiz hotmail escribió:
Hola lista,
Ese html...
Recurro a ustedes como ultimo recurso.
(...)
Mejor que preguntes en la lista/foros dedicada a Raspbian.
Ahora pruebo con raspbian con bluez-utils y no ocurre igual, siempre me
pide un pin para
*Hola comunidad:*
Soy estudiante de redes de datos y telecomunicaciones, en uno de los
desarrollos, tengo que hacer la documentación del mismo.
*Problema 1: (resuelto)*
*1.a)* La empresa o fábrica cuenta con 1000 usuarios de los cuales un 25%
están conectados al mismo tiempo (La mayor parte de
El Sun, 14 Dec 2014 12:58:00 -0500, Aaron Cygnus escribió:
Buenas tardes lista, necesito alguna opción para que mis usuarios tengan
la alternativa de cambiar sus claves de correos (alojadas en mysql) a
partir de la verificación de la anteriorigual me sirve, un
formulario donde los
a Manolo: postfixadmin, a lo que entendí, implementa una nueva db de
cero con nuevos dominios,usuarios, etc...no me es factible en estos
momentos, si usara la db que tengo actualmente en estos momento con
todo seria perfecto...de todas formas gracias por la sugerencia, otra
cosa, la instalación
El Sun, 14 Dec 2014 13:40:46 -0500, Aaron Cygnus escribió:
(...)
a Camaleón: pensé en roundcube, tiene un plugin que lo hace, pero tengo
implementado para bien o para mal afterlogic, un cambio de webmail me
acarrearía un sinfín de quejas por parte de los usuarios y un tirón al
seguro de
Gracias por responder,
Siento el html, hotmail me dice que es texto enriquecido,voy a probar sin
formato, a ver que tal.
1/ Correcto hay un sudo, pero no existe usuario root, no se si eso influye
pues yo lanzo los comandos ussp y demas como simple usuario, en el debian-686
y funcionan sin
http://www.afterlogic.com/wiki/Password_change_for_ISPConfig_%28WebMail_Plugins%29?WM=MS
pues sip..con este plugin voy resolviendo..gracias!!!
El día 14 de diciembre de 2014, 13:58, Camaleón noela...@gmail.com escribió:
El Sun, 14 Dec 2014 13:40:46 -0500, Aaron Cygnus escribió:
(...)
a
Un saludo a la lista.
He estado este fin de semana curioseando lxc sobre jessie; y he llegado
al problema de los contenedores de usuario (los unprivileged
containers, vamos).
Después de dar vueltas y vueltas por internet acabé por pergeñar una
solución, pero no me acaba de funcionar, no sé muy
Hola de nuevo:
Muchas gracias por sus sugerencias. Suena interesante lo de ZFS, no lo
he usado aun, ¿podrías explicar como es que lo usas Gonzalo, ese
equipo (servidor) que uso le dan? Por lo que comentas del SO pareciera
que administras un NAS con eso.
Respecto a la sugerencia de la liga está
Hej alla!
Jag har ett lite irriterande problem, jag inte begriper, inte heller
kunnat hitta någon lösning på.
Tacksam om någon kan komma på något.
Jag måste starta om tin2 med jämna mellanrum. Det verkar som att behovet
av omstart är större ju mer jag jobbar vid datorn.
Jag har två skärmar.
El Sat, Dec 13, 2014 at 09:45:33PM +0200, Andrei POPESCU escribió:
On Vi, 12 dec 14, 20:07:26, Patrick Bartek wrote:
I don't know how effective this check is though. But I've NEVER had a
dirty partition reported in the past 8 years or so. The nice thing is it
is a very fast check. My
On Sb, 13 dec 14, 18:38:36, The Wanderer wrote:
Serious question - I know it has its advantages for particular
scenarios, but I don't know how it stacks up in general-purpose use, and
I've never run across an accounting of its disadvantages in a context
which struck me as reliable.
As far
I am proposing to buy a headset for recording with Audacity and Wheezy. The
earphones will presumably be fine provided that sound is working, but I am a
bit worried about the mikes. These two Sennheiser headsets look promising,
but I would value comments:
On Sun, 14 Dec 2014, Andrei POPESCU wrote:
On Sb, 13 dec 14, 18:38:36, The Wanderer wrote:
Serious question - I know it has its advantages for particular
scenarios, but I don't know how it stacks up in general-purpose use, and
I've never run across an accounting of its disadvantages in a
I am asking this because I was unable to boot the previous version a couple
month ago. Thanks
On Sunday 14 December 2014 12:12:16 German wrote:
I am asking this because I was unable to boot the previous version a couple
month ago. Thanks
If it's live, suck it and see. (Just run it and see whether it runs.)
Lisi
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with
The reason I ask is that I don't have access to a computer right now ( after an
update my lubuntu can't boot, I am in recovery mode right now) and going and
asking my neighbour to use his is the last resort. So I thought some one
already could be able to boot 7.7 live on athlon 5350
Lisi Reisz
On Sunday 14 December 2014 12:26:14 German wrote:
The reason I ask is that I don't have access to a computer right now (
after an update my lubuntu can't boot, I am in recovery mode right now) and
going and asking my neighbour to use his is the last resort. So I thought
some one already could
I would boot knoppix, but I need debian
Lisi Reisz lisi.re...@gmail.com wrote:
On Sunday 14 December 2014 12:26:14 German wrote:
The reason I ask is that I don't have access to a computer right now (
after an update my lubuntu can't boot, I am in recovery mode right now) and
going and asking
On 2014-12-14, German gentger...@gmail.com wrote:
The reason I ask is that I don't have access to a computer right now (
after an update my lubuntu can't boot, I am in recovery mode right
now) and going and asking my neighbour to use his is the last resort.
So I thought some one already could
Sure, it works, Curt. I was able to run lubuntu 14.04 LTS for couple of months
until it crashed on me a day before yesterday. But it was installed only
because the previous version of Debian couldn't boot
Curt cu...@free.fr wrote:
On 2014-12-14, German gentger...@gmail.com wrote:
The reason I
Le 13.12.2014 05:10, Joel Rees a écrit :
2014/12/13 1:29 :
Le 12.12.2014 16:46, Joel Rees a écrit :
I did say it was not the dbus you download from freedesktop.org
[2] [5],
didn't I? ;-/
Indeed.
My understanding is that it is not just a port. Re-written from
scratch, I
While the system mentioned is lubuntu, I am wondering if are there any experts
who can look at my dmesg.log file and tell me what is wrong. This would be
extremely appreciated.
dmesg.log
Description: Binary data
This one has me puzzled.
I am running Sid with Xfce on my laptop and just now plugged in a USB
flash drive. When the icon displayed on the desktop I right-clicked and
selected Open and then was prompted for an application to open the
directory. I chose File Manager (Thunar) and received the
On 12/12/2014 10:46 PM, Joel Rees wrote:
2014/12/13 3:44 Miles Fidelman mfidel...@meetinghouse.net:
So... in all of this thread, I have yet to see anybody actually talk
about 9p or plumber - details, and more importantly, in comparison to D-Bus.
People are concerned about impacts to their
I seem to have resolved this by removing the /media/nate directory and
letting it be recreated when mounting the flash drive again.
* On 2014 14 Dec 13:18 -0600, Nate Bargmann wrote:
I found the drive mounted for root read and write access only:
drwxr-x--- 3 root root 4096 Dec 14 12:35 nate/
Le 13.12.2014 00:07, Ric Moore a écrit :
On 12/12/2014 07:47 AM, berenger.mo...@neutralite.org wrote:
Le 12.12.2014 11:43, claude juif a écrit :
If i had to answer this question the way i understand it i will say
:
Browsers, Mails and sometimes Games.
This is how i understand typical
Le 13.12.2014 20:55, Joe a écrit :
On Sat, 13 Dec 2014 11:53:48 -0500
Miles Fidelman mfidel...@meetinghouse.net wrote:
Does it not disturb anyone that most of the responses to this
question have been about how the question was phrased, even though
the intent was obvious. What does it say
berenger.morel writes:
In France, the electric network provide 220V to everyone.
In the USA as well. The normal wall outlets are 110 but 220 is brought
into the house and used for things like stoves. The power utility's
transformer has a 220V secondary with a grounded center tap so that you
Hi,
berenger.morel writes:
In France, the electric network provide 220V to everyone.
Are you sure? Starting from 2000 or so, the whole of europe has
gradually changed to 230v, as a compromise between UK (240v) and the
rest of europe (220v).
MJ
--
To UNSUBSCRIBE, email to
On Sun, 14 Dec 2014 22:48:49 +0100
mourik jan heupink - merit heup...@merit.unu.edu wrote:
Hi,
berenger.morel writes:
In France, the electric network provide 220V to everyone.
Are you sure? Starting from 2000 or so, the whole of europe has
gradually changed to 230v, as a compromise
On Sun, 14 Dec 2014 15:38:41 -0600
John Hasler jhas...@newsguy.com wrote:
In the USA as well. The normal wall outlets are 110 but 220 is brought
into the house and used for things like stoves. The power utility's
transformer has a 220V secondary with a grounded center tap so that you
get
On Sun, 14 Dec 2014 22:48:49 +0100
mourik jan heupink - merit heup...@merit.unu.edu wrote:
Hi,
berenger.morel writes:
In France, the electric network provide 220V to everyone.
Are you sure? Starting from 2000 or so, the whole of europe has
gradually changed to 230v, as a compromise
Hi all,
by which I mean for composition, midi work perhaps Miltie track recording
etc.?
I am aware of lilllypond for producing the actually printed music. As
this is a Linux program in general I imagine it is a part of Debian
somewhere.
Command line would preferred.
Thanks in advance,
Kare
After the lively debate here that replacing systemd after it's installed
is not the same as not installing it in the first place: Here's the
solution, more or less. Although, it seems, one will never be truly
free from parts of systemd in Testing-Jessie.
berenger.mo...@neutralite.org wrote:
Le 13.12.2014 20:55, Joe a écrit :
On Sat, 13 Dec 2014 11:53:48 -0500
Miles Fidelman mfidel...@meetinghouse.net wrote:
Does it not disturb anyone that most of the responses to this
question have been about how the question was phrased, even though
the
On Monday, December 15, 2014 5:10:04 AM UTC+5:30, Karen Lewellen wrote:
Hi all,
by which I mean for composition, midi work perhaps Miltie track recording
etc.?
I am aware of lilllypond for producing the actually printed music. As
this is a Linux program in general I imagine it is a part
Karen Lewellen wrote:
Hi all,
by which I mean for composition, midi work perhaps Miltie track recording
etc.?
Hi Karen,
Midish is a command-line app for MIDI recording.
Quite a bit of helper code is available for the serious
user.
For multitrack recording, it may be worth experimenting
with
Good evening Sir. Joel,
I will be writing you privately about this. I am not a build from source
kind of girl. still I am very interested in becoming a serious user of
both programs. Will also be joining the Linux audio lost.
Thanks profoundly!
Cheers,
Kare
On Sun, 14 Dec 2014, Joel Roth
Harry Putnam rea...@newsguy.com writes:
Some mnths ago (not sure how many) the icons (running program
indicators) that appear in the bottom (taskbar like ) panel changed
from showing icons of the running program such as the emacs icon,
xterm icon, vim icon etc. to just showing a generic icon
2014/12/15 0:28 berenger.mo...@neutralite.org:
Le 13.12.2014 05:10, Joel Rees a écrit :
2014/12/13 1:29 :
Le 12.12.2014 16:46, Joel Rees a écrit :
I did say it was not the dbus you download from freedesktop.org
[2] [5],
didn't I? ;-/
Indeed.
My
On Sun, Dec 14, 2014 at 06:20:41PM -0500, Karen Lewellen wrote:
Hi all,
by which I mean for composition, midi work perhaps Miltie track
recording etc.? [..] Command line would preferred.
I use abc notation [1]. It is lean, has everything I need composition
wise and it is text based. Relevant
I installed wheezy a week ago (with the installer which includes
xfce), and nm-applet was working fine. But today it won't start and
gives the message:
WARNING: gnome-keyring:: couldn't connect to:
/home/tom/.cache/keyring-4LJPFc/pkcs11: No such file or directory
** Message: applet now removed
63 matches
Mail list logo
