Interesante.
Teniendo en cuenta que el kernel de instalacion ha detectado y
configurado todo correctamente, el objetivo es usar la informacion de
lspci, lsusb y lsmod para coger todo lo que se necesita y eliminar lo
que sobra, teniendo asi un kernel afinado.
Salida parcial de lspci (no lo pongo
On 06/21/2015 05:50 PM, Ken Heard wrote:
Before running Christian's xdg-mime command as root I ran it as my user.
Since it did not have the desired effect I then ran it as root with the
result described above.
However a few minutes ago I read the manual page for sdg-mime. I then
discovered
Samuel a écrit :
Le 19/06/2015 16:31, Philippe Gras a écrit :
Comment puis-je vérifier la configuration d'iptables ?
iptables -L -n
Le format de sortie est pourri et incomplet.
Beaucoup mieux : iptables-save
--
Lisez la FAQ de la liste avant de poser une question :
csanyi...@gmail.com a écrit :
I want to create one LV for /usr and one LV for /var.
But I can't create a LV with:
# lvcreate --size 10.10G -n usr bubba
Rounding up size to full physical extent 10.10 GiB
/dev/bubba/usr: not found: device not cleared
Aborting. Failed to wipe start of new
2015-06-20 18:34 GMT+02:00 Altair Linux altairli...@gmail.com:
Buenas,
hay algun buscador de modulos del kernel o similar?.
La idea es que sabiendo la lista de modulos usados usando lsmod, lspci
saber donde estan exactamente cuando compilas manualmente un kernel.
Por ejemplo, si ext4 es un
El Sat, 20 Jun 2015 18:34:32 +0200, Altair Linux escribió:
hay algun buscador de modulos del kernel o similar?.
La idea es que sabiendo la lista de modulos usados usando lsmod, lspci
saber donde estan exactamente cuando compilas manualmente un kernel.
Por ejemplo, si ext4 es un modulo,
Var nyss inne på Tittarservice hemsida, och hittade där deras egen info om det.
http://www.svt.se/tittarservice/fraga-oss/dialog/848358
Eftersom Iceweasel i Jessie ligger några versioner bakom FF, så får vi
antagligen vänta några år till, innan Iceweasel är uppe i version 40.
Så du menar
On Sun, Jun 21, 2015 at 04:13:12PM +0200, Rolf Edlund wrote:
Den 21 juni 2015 16:02 skrev Johan Andersson j...@i19.se:
verkar som de bara funkar i safari på osx/iOS med html5 spelaren dom har nu.
Har för mig att Safari har stöd för HLS ?
Korrekt Rätt. Apple är dom som skapade HLS. vore lite
Den 21 juni 2015 16:20 skrev Johan Andersson j...@i19.se:
men men blir spännande och se hur de funkar med DASH.
Precis. Ska bli skönt att kunna skrota flash.
--
/Rolf
--
To UNSUBSCRIBE, email to debian-user-swedish-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
Philippe Gras a écrit :
ça fait un mois environ que j'ai des trucs comme ça avec netstat -antp :
---
tcp0 0 X.XXX.XXX.XX:3306 174.36.59.12:36852 SYN_RECV
-
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
On 06/21/2015 10:55 AM, Thomas H. George wrote:
[...]
Thanks I just tested Shift-Forward and it worked like a charm.
With this problem solved Icedove works perfectly for me.
Great! Nice to hear.
Regards,
Ralph
-BEGIN PGP SIGNATURE-
El Sat, 20 Jun 2015 20:41:38 -0430, Miguel Matos escribió:
Revivo el hilo 'constitucional' del tema:
El día 27 de mayo de 2015, 9:00, Camaleón noela...@gmail.com escribió:
(...)
¿Y ahora? Ya me aseguré de activar el modo de texto sin formato. Dos
veces.
Este salió bien. No entiendo el
On Sun, Jun 21, 2015 at 03:26:17PM +0200, Rolf Edlund wrote:
Hej!
För den ev instresserade..
SVT kommer nästa vecka (v.26), att lägga upp en ny HTML5 spelare. Som
gör att dom som har har Firefox v.40 eller senare, kunna spela upp med
DASH. Vilket innebär att jag/vi nu kan skrota Flash
Samuel a écrit :
C'est un peu large comme accès, je mettrais plutôt du genre (exemple sur
une chaine FORWARD à compléter selon besoins ):
iptables -A FORWARD -i $fai -o $lan -p icmp -m state --state RELATED
--icmp-type source-quench -j ACCEPT
Ce type ICMP est obsolète est considéré
A small contribution, perhaps unnecessary. To change the size of a lvs with
lvreduce or lvextend is important to use the resize2fs and e2fsck command. Good
luck in solving the problem
On Sun, Jun 21, 2015 at 11:38 AM, Pascal Hambourg pas...@plouf.fr.eu.org
wrote:
csanyi...@gmail.com a écrit :
On 2015-06-18, Tom Ashley tomashle...@gmail.com wrote:
I have no experience with the package but noticed the following in the
description supplied by aptitude: There is at least one module needed.
Without a module this package will not work as expected! See packages
desktopnova-module-*.
Bruce Ward a écrit :
On Thu, Jun 18, 2015 at 11:12:49PM +1200, Bruce Ward wrote:
An entry options forcedeth ms=0 msix=0 in some /etc/modprobe.d/foo.conf
should do thr trick, no?
I have tried putting the line
forcedeth msi=0 msix=0
into /etc/modules as appeared to work for this
Hej!
För den ev instresserade..
SVT kommer nästa vecka (v.26), att lägga upp en ny HTML5 spelare. Som
gör att dom som har har Firefox v.40 eller senare, kunna spela upp med
DASH. Vilket innebär att jag/vi nu kan skrota Flash spelaren.
Yipp !!
--
/Rolf
--
To UNSUBSCRIBE, email to
Den 21 juni 2015 16:02 skrev Johan Andersson j...@i19.se:
verkar som de bara funkar i safari på osx/iOS med html5 spelaren dom har nu.
Har för mig att Safari har stöd för HLS ?
Är ingen Mac användare.
--
/Rolf
--
To UNSUBSCRIBE, email to debian-user-swedish-requ...@lists.debian.org
with a
On Sun, 2015-06-21 at 15:26 +0200, Rolf Edlund wrote:
Hej!
För den ev instresserade..
SVT kommer nästa vecka (v.26), att lägga upp en ny HTML5 spelare. Som
gör att dom som har har Firefox v.40 eller senare, kunna spela upp
med
DASH. Vilket innebär att jag/vi nu kan skrota Flash
verkar som de bara funkar i safari på osx/iOS med html5 spelaren dom har nu.
On Sun, Jun 21, 2015 at 03:56:15PM +0200, Rolf Edlund wrote:
Var nyss inne på Tittarservice hemsida, och hittade där deras egen info om
det.
http://www.svt.se/tittarservice/fraga-oss/dialog/848358
Eftersom
Gary Dale a écrit :
re. booting with a degraded array. I haven't tried it myself but it
looks like it should work.
It should, as long as the array knows that is is degraded before
shutdown or reboot.
Due to incremental assembly being enabled in Jessie udev scripts, if you
just shutdown,
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 2015-06-20 15:37, Christian Seiler wrote:
On 06/20/2015 02:24 PM, Ken Heard wrote:
On 2015-06-19 11:27, Christian Seiler wrote:
You can try to set a default browser explicitly:
xdg-mime default iceweasel.desktop x-scheme-handler/http \
Pascal Hambourg pas...@plouf.fr.eu.org writes:
csanyi...@gmail.com a écrit :
I want to create one LV for /usr and one LV for /var.
But I can't create a LV with:
# lvcreate --size 10.10G -n usr bubba
Rounding up size to full physical extent 10.10 GiB
/dev/bubba/usr: not found: device not
On Sun, Jun 21, 2015 at 12:36:21PM +0200, Altair Linux wrote:
Ahora falta saber exactamente donde esta cada uno, jerarquicamente o
algo por el estilo, para ir directamente a el.
Insisto: No te hace falta saber dónde está cada uno. Basta
con hacer make localyesconfig o make localmodconfig
y él
El Sat, 20 Jun 2015 19:45:38 -0400, Marioca escribió:
(ese html...)
Buenas lista cuando me cambie a jessie extrañamente dejo de funcionar la
tecla funcion y asi con ellos sus respecitivas funcionea y una primordia
para mi es para configurar mi avg para monitot o proyector, pregunto si
a
On 2015-Jun-20 19:42, Bob Proulx wrote:
Proxy One wrote:
Why use /dev/shm/user-php.sock as the socket path? The Jessie-style
location would be in /var/run/user-php.sock AFAICS. (I don't see how
that would be related to your socket dissappearing.)
I used that path on Centos
On 21/06/15 08:08 PM, bri...@aracnet.com wrote:
On Sun, 21 Jun 2015 19:33:50 -0400
Gary Dale garyd...@torfree.net wrote:
I'm not actually grasping some fundamental questions here.
1) where is your printer? I get the impression that it is attached to a
computer on the network and not your local
On Sun, 21 Jun 2015 19:33:50 -0400
Gary Dale garyd...@torfree.net wrote:
I'm not actually grasping some fundamental questions here.
1) where is your printer? I get the impression that it is attached to a
computer on the network and not your local machine.
2) what type of printer is it?
3)
Hi Brian,
Cups is a demanding friend. You can find the path to your printer through
the *lpinfo -m*. After finding the relative path to your printer you can
use the *lpadmin* command to install it. The *lpstat -p* command will show that
the printer is turned on.
On Sun, Jun 21, 2015 at 9:08 PM,
É uma decisão pessoal utilizar sempre o que é mais antigo possível com
estabilidade, mas isto náo é especificamente contra o systemd. Quando o
systemd tiver sido utilizado por mais tempo e houver mais relatos e
constatações sobre isso, poderei decidir pela utilização dele e não do
outro anterior.
É uma decisão pessoal utilizar sempre o que é mais antigo possível com
estabilidade, mas isto náo é especificamente contra o systemd. Quando o
systemd tiver sido utilizado por mais tempo e houver mais relatos e
constatações sobre isso, poderei decidir pela utilização dele e não do
outro anterior.
On Sun, 21 Jun 2015 23:01:14 -0400
Gary Dale garyd...@torfree.net wrote:
On 21/06/15 08:08 PM, bri...@aracnet.com wrote:
On Sun, 21 Jun 2015 19:33:50 -0400
Gary Dale garyd...@torfree.net wrote:
I'm not actually grasping some fundamental questions here.
1) where is your printer? I get
On 06/21/2015 06:42 PM, John Hasler wrote:
Tim Beelen writes:
How do I find out which application is accessing what device?
It's all software. There is no hardware involved at all: they use a
virtual device. It works even when the computer is off. Doesn't matter
if your machine has a
On 22/06/15 12:38, Ric Moore wrote:
On 06/21/2015 06:42 PM, John Hasler wrote:
Tim Beelen writes:
How do I find out which application is accessing what device?
It's all software. There is no hardware involved at all: they use a
virtual device. It works even when the computer is off.
On Sun, 21 Jun 2015 22:31:17 -0300
Gustavo S. L. ght...@gmail.com wrote:
Hi Brian,
Cups is a demanding friend. You can find the path to your printer through
the *lpinfo -m*. After finding the relative path to your printer you can
use the *lpadmin* command to install it. The *lpstat -p*
On Mon, Jun 22, 2015 at 1:51 AM, bri...@aracnet.com wrote:
it ALWAYS says it's sending data to the printer. only it's not.
You got to check this link?
http://support.brother.com/g/s/id/linux/en/download_prn.html#DCP-8110DN
--
Guto
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 2015-06-21 14:29, Christian Seiler wrote:
On 06/21/2015 08:19 PM, Ken Heard wrote:
On 2015-06-21 12:19, Christian Seiler wrote:
Could you check Icedove configuration?
Edit - Preferences - Advanced - Tab: General - Config
Editor - I know
Bob Proulx b...@proulx.com wrote:
I don't know about the new Raspberry quad core. Does it have the same
limited usb chip as the original?
It does. But because the CPU is more powerful (and you have 4 cores) you
can squeeze about 95MBit/s out of it.
Right now I am dd'ing a 600MB file over NFS
On Mon, 15 Jun 2015 00:12:22 +0100
Brian a...@cityscape.co.uk wrote:
On Sun 14 Jun 2015 at 15:07:51 -0700, bri...@aracnet.com wrote:
On Sun, 14 Jun 2015 21:25:47 +0100
Lisi Reisz lisi.re...@gmail.com wrote:
On Sunday 14 June 2015 21:14:00 bri...@aracnet.com wrote:
i am not
On 06/21/2015 08:19 PM, Ken Heard wrote:
On 2015-06-21 12:19, Christian Seiler wrote:
Could you check Icedove configuration?
Edit - Preferences - Advanced - Tab: General - Config Editor
- I know what I'm doing
then see what the settings are for (as far as they exist):
Answers below:
Mayuresh wrote:
I am a new Debian user.
Welcome! :-)
On a freshly purchased laptop I installed Debian jessie and I am facing a
constant recurring disk noise.
Is your Load_Cycle_Count continuously increasing? You mention a
laptop and at one time there was a big problem with disk drives
chris tknch...@gmail.com writes:
systemd is a cancer that you should completely eradicate especially on a
system like that
Please follow Debian's Code of Conduct[1] (or just basic manners) on
Debian's mailing lists. Calling free software projects a cancer is not
appropriate whether you like
This might not quite be on-topic, but I suspect since it's all linux,
help could be had there.
All is configured, mindlna, GMPC and MPD; the issue now is that GMPC can
play/control MPD, but there's no sound on my laptop while the songs are
being played.
If you have similar configurations or
On Sun, 21 Jun 2015 23:19:36 +0200
notoneofmyseeds notoneofmyse...@gmx.de wrote:
This might not quite be on-topic, but I suspect since it's all linux,
help could be had there.
All is configured, mindlna, GMPC and MPD; the issue now is that GMPC
can play/control MPD, but there's no sound on
El día 21 de junio de 2015, 8:54, Camaleón noela...@gmail.com escribió:
El Sat, 20 Jun 2015 20:41:38 -0430, Miguel Matos escribió:
Revivo el hilo 'constitucional' del tema:
El día 27 de mayo de 2015, 9:00, Camaleón noela...@gmail.com escribió:
(...)
¿Y ahora? Ya me aseguré de activar el
On 06/21/2015 11:18 PM, Ken Heard wrote:
On 2015-06-21 14:29, Christian Seiler wrote:
Maybe the %u is a problem here (I know it's valid in .desktop
files, but maybe not in Mozilla preferences), so could you perhaps
reset the value for network.protocol-handler.app.http to its
default value?
Is it true? Is Google actively listening in on my conversations?
Apparently this:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=786909
*Yesterday, news broke that Google has been stealth downloading audio
listeners onto every computer that runs Chrome, and transmits audio
data back to
Tim Beelen writes:
How do I find out which application is accessing what device?
It's all software. There is no hardware involved at all: they use a
virtual device. It works even when the computer is off. Doesn't matter
if your machine has a microphone or even any audio input capability.
--
El Domingo, 21 de junio de 2015 19:19:45 Santiago Vila escribió:
Insisto: No te hace falta saber dónde está cada uno. Basta
con hacer make localyesconfig o make localmodconfig
y él se encarga de todo.
Puedes incluso hacer esto:
lsmod lsmod.txt
en la máquina donde vayas a usar el
On 13/06/15 03:16 PM, bri...@aracnet.com wrote:
using the Debian how-to.
Now you can add a printer by going to
http://localhost:631/
no i can't.
however... i did find that for some bizarre reason my localhost interface was
not set to auto, so i had to add it. i'm relatively sure
Sven Hartge wrote:
Reco wrote:
Sven Hartge wrote:
Maybe the USB hardware implementation is better in the N900? The one
in the Pi is quite bad and finicky.
I am coming to this discussion late but I had to confirm that the USB
chip in the Raspberry Pi is very limiting. It has a maximum
On 06/19/2015 11:13 AM, Diogene Laerce wrote:
If you look for a light dlna server, minidlna is the one.
Good luck,
Thanks for this, I'm running minidlna right now. It's nuts to think that
there's no dlna client, just client by itself, for Linux. What? Woa!
Tons for MPD, however, just not
Buenas noches:
Tengo instalado Debian testing y desde que he instalado / actualizado
estos paquetes hoy, no me van las teclas de control de brillo, volumen,
etc... Uso GNOME 3.16
Actualizó los siguientes paquetes:
argyll (1.7.0+repack-2) to 1.7.0+repack-3
argyll-ref (1.7.0+repack-2) to
On Mon, 15 Jun 2015 00:12:22 +0100
Brian a...@cityscape.co.uk wrote:
For the moment forget about what the client machine can or cannot do and
forget about connecting the printer over the network to the server. These
things can be sorted out later.
Using USB plug the printer into the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 2015-06-21 12:19, Christian Seiler wrote:
On 06/21/2015 05:50 PM, Ken Heard wrote:
Before running Christian's xdg-mime command as root I ran it as
my
user.
Since it did not have the desired effect I then ran it as root
with the result
On 06/21/2015 03:30 AM, Germar wrote:
So, to avoid all this I recommend creating an image of your system with
Clonezilla (once a year) AND create snapshots with BIT every
day/week/whatever. This way you can restore the image and have a working
system on which you now only need to restore all
Le 21/06/2015 16:26, Pascal Hambourg a écrit :
Samuel a écrit :
C'est un peu large comme accès, je mettrais plutôt du genre (exemple sur
une chaine FORWARD à compléter selon besoins ):
iptables -A FORWARD -i $fai -o $lan -p icmp -m state --state RELATED
--icmp-type source-quench -j ACCEPT
Ce
Yeah, that was my understanding as well. However, with
desktopnova-module-gnome installed, it doesn't change the desktop
wallpaper. Everything indicates that it is working, I get no errors.
When I start the daemon, it reports that it is started, and a ps command
verifies that it is indeed
Just a quick question:
do I need to remove/purge NetworkManager Applet 0.9.10.0 to manually
configure my interfaces?
I'm using a laptop and want the wifi to go online, but the ethernet to
stay on a different lan networks, actually two different networks. And I
worry how to proceed with such
notoneofmyseeds wrote:
do I need to remove/purge NetworkManager Applet 0.9.10.0 to manually
configure my interfaces?
It is not necessary. However I recommend doing so anyway.
It is not necessary because NetworkManager and wicd ignore any
interface with a configuration in
On Sun, Jun 21, 2015 at 10:08:39PM +0200, BasaBuru wrote:
Mi pregunta es: me puedes regalar la caña, en vez de darme el pescado???
Sabes de algún howto solido y contrastado, que sea fiable para ti y que me
permita profundizar en este tema? Optimización del kernel, mecanismos,
procesos,
Le 20/06/2015 23:45, Michael Biebl a écrit :
Am 20.06.2015 um 21:37 schrieb Erwan David:
On Thu, Jun 18, 2015 at 05:09:14PM CEST, Michael Biebl bi...@debian.org
said:
Am 18.06.2015 um 15:16 schrieb Erwan David:
Hello, I use openvpn through NetworkManager, the server gives a DNS
server,
I am using Debian with XFCE.
Default behavior: No match or alias
---
First, let me show the default behavior of my system when
~/.config/fontconfig/fonts.conf has no match or alias tags.
?xml version=1.0?
!DOCTYPE fontconfig SYSTEM fonts.dtd
On 06/20/2015 05:03 PM, Lisi Reisz wrote:
On Saturday 20 June 2015 18:08:53 Bret Busby wrote:
I understand that mate is in spanish,
As I said, codswallop. Why don't you look at it before dismissing it?
Lisi
Lisi. What ever happened to Karl?? :) Ric
--
My father, Victor Moore (Vic) used
On Sun, Jun 21, 2015 at 07:28:02AM +0200, Altair Linux wrote:
Eso me lleva a configurar el kernel pregunta a pregunta, como si no
usara ncurses.
No. Te pregunta una minúscula parte de todas las preguntas que hay
y puedes darle a Intro a todo si quieres. Acabas enseguida.
El resultado es un
On 21/06/15 08:41, Lone Learner wrote:
Here we see that the system has respected my substitution rule for
Consolas, but it has not respected my substitution rule for Courier.
Why is output of `fc-match Courier` still Nimbus Mono L and not
DejaVu Sans Mono?
*looks at man page for fc-match*
67 matches
Mail list logo