Le Mon, 3 Aug 2015 20:04:47 +0200,
Guillaume Caron guillaume.caron.h...@orange.fr a écrit :
Je ne vois pas en quoi vouloir placer comme priorité les
fonctionnalités et la qualité du code est ego-centré. C'est une
démarche en soit, tout projet doit faire des choix parfois
criticables, de là à
Hi,
Curt wrote:
What about
sysctl -w dev.cdrom.autoclose=0
Now that's an interesting name.
# sysctl dev.cdrom.autoclose
dev.cdrom.autoclose = 1
Nitpickingly, i'd say that /dev/cdrom is not the mad drive sr1,
but rather its iwell behaved neighbor sr0
lrwxrwxrwx 1 root root 3 Aug 3
Le 4 août 2015 à 11:41, Haricophile haricoph...@aranha.fr a écrit :
Le Mon, 3 Aug 2015 18:16:25 +0200 (CEST),
jber...@free.fr a écrit :
C'est curieux. Je ne peux en effet pas lire cette vidéo avec
iceweasel, dont j'ai désactivé le plugin flash et activé le plugin
vlc. En revanche, si je
On Monday, 3 August 2015 19:30:05 UTC+1, notoneofmy wrote:
On 08/03/2015 07:21 PM, anxiousmac wrote:
Perhaps related to my issue posted to debian.maint.kde about a week ago?
I happened upon a debian-installer bug report which points out that if one
needs firmware from a stick during
Thanks all for your help and suggestions. I'll summarise what further
testing I've done:
I believe 3D acceleration is working. `glxgears` runs and seems to
achieve a smooth 60 Hz. The __memcpy_sse2_unaligned load doesn't seem
to increase due to running glxgears.
glxgears -info reports:
On Tue, Aug 4, 2015 at 4:11 AM, Magicloud Magiclouds
magicloud.magiclo...@gmail.com wrote:
Hi,
Say I am moving a file between two harddisks. Both filesystems are Ext4.
During the operation, I cut off the power. Then boot the host, and fix the
filesystems.
Now, I see in both locations, there
On Mon, Aug 03, 2015 at 08:29:31PM -0500, martin McCormick wrote:
ukvpn.ufreevpn.com and I have never seen this work before so I am
not sure what a working setup behaves like. It appears that it
takes a sort of grand tour in which it makes 7 or 8 attempts at
connecting but it ultimately gives
Hola muy buenas, acudo a ustedes porque es un tema que me tiene un
poco desesperado, no sé por que pasa...
El caso es que creo una máquina virtual KVM, instalo debian y le añado
2 interfaces de red:
eth0 -- 192.168.0.33 -- vmbr0
eth1 -- 192.168.0.34 -- vmbr0
Es decir, le doy 2 ips de mi rango
Antônio, muito obrigado pela resposta!
Penso que a solução seria voltar (downgrade) o gcc defaults e pacotes
correlatos para a testing. Porque mesmo o libreoffice da testing não
instalaria. Na verdade, nem a versão do libreoffice da experimental. Todas
dependem do libboost1.55.0 quebrado pela
On Mon, Aug 3, 2015 at 5:18 PM, Nicolas George wrote:
I gave a few hints about the tools to use for that in this message:
https://lists.debian.org/debian-user/2015/07/msg00648.html
I can see my card in /proc/asound/cards:
$ cat /proc/asound/cards
0 [Generic]: HDA-Intel - HD-Audio
Le septidi 17 thermidor, an CCXXIII, Bruno Schneider a écrit :
I can see my card in /proc/asound/cards:
Good.
But I can't play sound on it:
The reason is in the error message. Unlike some other systems, Linux gives
useful error messages, reading them is a good habit to take.
aplay:
Hi,
Stuart Longland wrote:
Silly question, but why does re-loading a disc take more than 197 seconds?
It comes out (intentionally) after a backup run is complete
and went well. (See man xorriso example Incremental backup
of a few directory trees.)
Then i'd expect it to stay out until i remove
Hi,
Stuart Longland wrote:
Finally it discourages the tray's misuse by the illiterate (e.g. as a
carry handle or cup holder).
Chris Bannister wrote:
That sounds like Windoze thinking. I, personaly, would hate the idea
that the disc tray may automatically retract without notice.
Doesn't
On Tue, 04 Aug 2015 09:06:15 +0200
Thomas Schmitt scdbac...@gmx.net wrote:
Hi,
Stuart Longland wrote:
Silly question, but why does re-loading a disc take more than 197 seconds?
It comes out (intentionally) after a backup run is complete
and went well. (See man xorriso example
Hello Andrew,
On 03/08/15 14:44, Bonno Bloksma wrote:
I have a similar setup but the untagged network is the management
network for the APs. All traffic on the WiFi network is done in VLANS. That
is how I have it setup.
So in that case you should have 3 definitions on eth1 (assuming
Thomas Schmitt wrote:
I use BD-R and BD-RE for multi-volume backups with scdbackup,
and for multi-session backups with xorriso directly.
scdbackup
http://scdbackup.sourceforge.net/main_eng.html
splits large backup areas into file collections which
fit on single media:
(...)
Le Mon, 3 Aug 2015 18:16:25 +0200 (CEST),
jber...@free.fr a écrit :
C'est curieux. Je ne peux en effet pas lire cette vidéo avec
iceweasel, dont j'ai désactivé le plugin flash et activé le plugin
vlc. En revanche, si je lis l'url de la vidéo directement avec vlc,
la lecture fonctionne
Le mardi 04 août 2015 à 16:11 +0800, Magicloud Magiclouds a écrit :
Now, I see in both locations, there are the file. My question is, is
it safe to remove file in dest, and move to it again from src?
I think that if you were just reading files from src, there is no reason
for the source to be
So, is there anyway to downgrade the gcc lib?
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive:
https://lists.debian.org/6a260941-e65f-4a40-8f58-b06c17cbb...@icloud.com
Hi,
Say I am moving a file between two harddisks. Both filesystems are Ext4.
During the operation, I cut off the power. Then boot the host, and fix the
filesystems.
Now, I see in both locations, there are the file. My question is, is it
safe to remove file in dest, and move to it again from src?
On Mon, Aug 03, 2015 at 12:06:55PM -0700, Gary Roach wrote:
Hi all,
My IDE is throwing the following error on start up:
Traceback (most recent call last):
File /usr/lib/python2.7/dist-packages/ninja_ide/core/plugin_manager.py,
line 319, in load
dir_name)
File
Hi,
I apologize for mailing you off-list
Well, i got it with these headers
To: debian-user@lists.debian.org
Resent-From: debian-user@lists.debian.org
The mail address scdbac...@gmx.net is public for support of
optical drives, ISO 9660, and backup in general. If your topic
is of public
On 2015-08-04, Thomas Schmitt scdbac...@gmx.net wrote:
Nevertheless i disabled this kernel feature by
echo 0 /sys/block/sr1/events_poll_msecs
and now btrace(8) does not show any SCSI traffic when the tray
goes in.
What about
sysctl -w dev.cdrom.autoclose=0
Or is that completely off the
I'm trying to install the latest Firefox Nightly (test builds released
each day) on my laptop.
On Ubuntu, there is a PPA that ships fairly recent versions of Nightly.
But on Debian, I can't find such repository.
I use the mozilla.debian.net repo to get the latest stable Iceweasel. I
see that
What's the output of
$ grep render /var/log/Xorg.0.log
?
--
Regards,
jvp.
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: https://lists.debian.org/mpqfeg$4m8$1...@ger.gmane.org
On 2015-08-03 12:24:07 AM, rlhar...@oplink.net wrote:
On Sun, August 2, 2015 10:16 pm, sp113438 wrote:
mutt-patched:
This package adds the following patches:
* sidebar: list mailboxes (with new mail) in a separate column on
screen
* nntp: NNTP support for mutt
* multiple-fcc: handle
On Wed, 2015-08-05 at 00:46 +1200, Chris Edwards wrote:
Perhaps interestingly, `glxinfo -i` reports:
name of display: :0.0
X Error of failed request: BadValue (integer parameter out of range
for
operation)
Major opcode of failed request: 155 (GLX)
Minor opcode of failed request:
Hi everyone
I wanted to post, for posterity, what I recently learned while playing
with my new external USB3 disk drive.
I needed to control the power settings for this drive. I noticed that it
was never ever spinning down, so I wanted to be able to either power in
up/down on command, or
Hey David, did you ever get this figured out?
Did you ever inspect the device parameters via sdparm or hdparm?
I have *heard* of some Seagate devices disappearing when they go into
suspend, but your problem doesn't sound like this issue since it happens
in the middle of writing. Still, I
El Tue, 04 Aug 2015 11:55:57 +0200, Maykel Franco escribió:
(...)
Os cuento lo que me pasa:
- Mientras hago ping a 192.168.0.33, desconecto la interfaz vmbr0 --
net0 de red desde Proxmox y se para el ping, la vuelvo habilitar y
continua el ping, eso bien.
- El problema viene con la
El 04/08/15 a las 15:01, Juan Lavieri escribió:
Para aquellos que estén pensando en la posibilidad de instalar el
gratuito Windows(r) 10, es bueno leer esto:
http://www.elconfidencial.com/tecnologia/2015-08-01/windows-10-espia-tus-movimientos-pero-puedes-evitarlo-siguiendo-estos-pasos_950244/
El Tue, 04 Aug 2015 08:31:07 -0430, Juan Lavieri escribió:
Para aquellos que estén pensando en la posibilidad de instalar el
gratuito Windows(r) 10, es bueno leer esto:
http://www.elconfidencial.com/tecnologia/2015-08-01/windows-10-espia-
Le mardi 04 août 2015 à 16:11 +0800, Magicloud Magiclouds a écrit :
Hi,
Hello.
Say I am moving a file between two harddisks. Both filesystems are
Ext4. During the operation, I cut off the power. Then boot the host,
and fix the filesystems.
Now, I see in both locations, there are the
Quoting Magicloud Magiclouds magicloud.magiclo...@gmail.com:
Hi,
Say I am moving a file between two harddisks. Both filesystems are
Ext4. During the operation, I cut off the power. Then boot the host, and
fix the filesystems.
Now, I see in both locations, there are the file.
On Aug 4, 2015 1:26 AM, Some Body somebody.mo...@gmail.com wrote:
Le mardi 04 août 2015 à 16:11 +0800, Magicloud Magiclouds a écrit :
Now, I see in both locations, there are the file. My question is, is
it safe to remove file in dest, and move to it again from src?
If you don't want to
Hola Camaleón:
Decías el Lunes, 03 de Agosto del 2015.
El Mon, 03 Aug 2015 14:21:57 +0200, José Tomás Mateo Ruiz escribió:
Tengo un servidor debian 8 de archivos e impresora en un pueblo, y a 60
Km en otro una oficina con 3 clientes windows 7 es posible la conexión
con el servidor a trabes
On 2015-08-04, Thomas Schmitt scdbac...@gmx.net wrote:
Hi,
Curt wrote:
What about
sysctl -w dev.cdrom.autoclose=0
Now that's an interesting name.
# sysctl dev.cdrom.autoclose
dev.cdrom.autoclose = 1
Nitpickingly, i'd say that /dev/cdrom is not the mad drive sr1,
but rather its
Thanks all for your help and suggestions. I'll summarise what further
testing I've done:
I believe 3D acceleration is working. `glxgears` runs and seems to
achieve a smooth 60 Hz. The __memcpy_sse2_unaligned load doesn't seem
to increase due to running glxgears.
glxgears -info reports:
Le mardi 04 août 2015 à 08:49 -0400, James Montgomery a écrit :
On Tue, Aug 4, 2015 at 4:11 AM, Magicloud Magiclouds
magicloud.magiclo...@gmail.com wrote:
Hi,
Say I am moving a file between two harddisks. Both filesystems are Ext4.
During the operation, I cut off the power. Then boot the
On Mon, Aug 03, 2015 at 11:58:03PM -0300, Dennis Gonçalves wrote:
Bom,
eu pesquisei um pouco mais agora a noite, com mais tempo, sobre este
problema das dependências. O problema é que o libstc++6 (v 5.2.1) está
quebrando vários pacotes. Dentre eles o libboost-date-time1.55.0, que é
Para aquellos que estén pensando en la posibilidad de instalar el
gratuito Windows(r) 10, es bueno leer esto:
http://www.elconfidencial.com/tecnologia/2015-08-01/windows-10-espia-tus-movimientos-pero-puedes-evitarlo-siguiendo-estos-pasos_950244/
Saludos
--
Juan Lavieri
Errar es de humanos,
El 04/08/15 a las 16:30, Camaleón escribió:
El Tue, 04 Aug 2015 08:31:07 -0430, Juan Lavieri escribió:
Para aquellos que estén pensando en la posibilidad de instalar el
gratuito Windows(r) 10, es bueno leer esto:
http://www.elconfidencial.com/tecnologia/2015-08-01/windows-10-espia-
El 4/8/15, Juan Lavieri jlavi...@gmail.com escribió:
Para aquellos que estén pensando en la posibilidad de instalar el
gratuito Windows(r) 10, es bueno leer esto:
On Tuesday 04 August 2015 15:16:39 Nicolas George wrote:
I assume, of course, that you re-re-checked the speakers and tried to plug
them in all sockets?
Sorry, but... And checked that they are plugged in to a turned on wall socket
and turned on themselves?
Lisi
--
To UNSUBSCRIBE, email to
Le septidi 17 thermidor, an CCXXIII, Lisi Reisz a écrit :
I assume, of course, that you re-re-checked the speakers and tried to plug
them in all sockets?
Sorry, but... And checked that they are plugged in to a turned on wall
socket
and turned on themselves?
That is not even enough, one
On Tuesday 04 August 2015 09:11:38 Magicloud Magiclouds wrote:
Now, I see in both locations, there are the file. My question is, is it
safe to remove file in dest, and move to it again from src?
Why not rename it (mv it to another name) in dest before mv-ing it again from
src?
Lisi
--
To
El 4 de agosto de 2015 13:58:25 GMT-04:30, AlexLikeRock
alexliker...@gmail.com escribió:
Por cierto, si hablamos del núcleo (que se llama Linux), decir
kernel 4.0 de Linux resulta un poco raro, puesto que Linux no
tiene un núcleo sino que él mismo *ya* es el núcleo.
Simplemente diciendo
Dos clases de personas fracasan en la vida, las que no saben nada, pero
peores son las que creen saberlo todo.
El 04/08/2015 15:26, AlexLikeRock alexliker...@gmail.com escribió:
Por cierto, si hablamos del núcleo (que se llama Linux), decir
kernel 4.0 de Linux resulta un poco raro, puesto que
El 4 de agosto de 2015 10:38:44 GMT-04:30, Rodolfo Edgar
sololistasdecor...@gmail.com escribió:
El 4/8/15, Juan Lavieri jlavi...@gmail.com escribió:
Para aquellos que estén pensando en la posibilidad de instalar el
gratuito Windows(r) 10, es bueno leer esto:
Update to this:
In the message below, I said that setting SCT=18000 would be a 15
minute spindown, but this does not appear to be correct.
I suspect this parameter is like the hdparm -S argument, which is
non-linear.
I have confirmed that SCT=1200 is 1-minute, and SCT=3000 is 5-minutes.
On Tue, Aug 4, 2015 at 5:11 PM, Magicloud Magiclouds
magicloud.magiclo...@gmail.com wrote:
Hi,
Say I am moving a file between two harddisks.
Now you know. You don't want to do that.
(Although I just did that. It was a notebook, I knew the battery was
good, and I was only mv-ing, uhm, well, it
On Tuesday 04 August 2015 16:29:08 Nicolas George wrote:
Le septidi 17 thermidor, an CCXXIII, Lisi Reisz a écrit :
I assume, of course, that you re-re-checked the speakers and tried to
plug them in all sockets?
Sorry, but... And checked that they are plugged in to a turned on wall
Para hacer Videos Tutoriales yo utilizaba Simple Screen Recorder (Debian 7
instala gtk-recordmydesktop
# aptitude isntall gtk-recordmydesktop
o si deseas descargalo mauanlmente
https://packages.debian.org/search?keywords=gtk-recordmydesktop
saludos de México
--
Olá,
On Mon, Aug 03, 2015 at 11:58:03PM -0300, Dennis Gonçalves wrote:
Bom,
eu pesquisei um pouco mais agora a noite, com mais tempo, sobre este
problema das dependências. O problema é que o libstc++6 (v 5.2.1) está
quebrando vários pacotes. Dentre eles o libboost-date-time1.55.0, que é
Bonjour,
Depuis peu, sur mon serveur,
lorsque je laisse une connexion root via ssh sans rien faire,
au bout d'un certain temps, la connexion est figée.
Je dois éteindre la console, puis la réouvrir, me relogguer
et je constate que l'ancien processus sshd: root@pts/0
est toujours actif, ce qui
mireero mire...@free.fr writes:
Donc, quand je me déplace dans l'historique du terminal, et que
j'appuie sur la touche flèche haute, la dernière commande est bien
rappelée mais pas moi, j'entends par là que l'affichage ne change pas,
je reste plus haut.
Est-ce que ça le fait dans d’autres
Por cierto, si hablamos del núcleo (que se llama Linux), decir
kernel 4.0 de Linux resulta un poco raro, puesto que Linux no
tiene un núcleo sino que él mismo *ya* es el núcleo.
Simplemente diciendo Linux 4.0 ya se entiende que nos referimos a la
versión 4.0 de Linux :-)
Eduardo Rios es
On 20150804_1611+0800, Magicloud Magiclouds wrote:
Hi,
Say I am moving a file between two harddisks. Both filesystems are Ext4.
During the operation, I cut off the power. Then boot the host, and fix the
filesystems.
Now, I see in both locations, there are the file. My question is, is it
On 8/4/2015 at 8:57 PM, Chris Edwards cedwa...@ripples.dyndns.org wrote:
Thanks all for your help and suggestions. I'll summarise what
further
testing I've done:
I believe 3D acceleration is working. `glxgears` runs and seems to
achieve a smooth 60 Hz. The __memcpy_sse2_unaligned load
Le 4 août 2015 à 18:46, andre_deb...@numericable.fr a écrit :
Bonjour,
Depuis peu, sur mon serveur,
lorsque je laisse une connexion root via ssh sans rien faire,
au bout d'un certain temps, la connexion est figée.
Ça m'est arrivé récemment à cause d'un disque dur pratiquement mort.
Le
On Tuesday 04 August 2015 20:36:03 Philippe Gras wrote:
Le 4 août 2015 à 18:46, andre_deb...@numericable.fr a écrit :
Depuis peu, sur mon serveur,
lorsque je laisse une connexion root via ssh sans rien faire,
au bout d'un certain temps, la connexion est figée.
Ça m'est arrivé récemment à
It appears that /usr/bin/mutt-org is the original mutt (that is, mutt
without sidebar). And in /usr/share/doc/mutt is the mutt manual version
1.5.23 dated 2014.03.12. So now mutt appears to be up and running pretty
much as I remember it.
Thus far, I have not figured out how to utilize the
El 04/08/15 a las 20:28, AlexLikeRock escribió:
Por cierto, si hablamos del núcleo (que se llama Linux), decir
kernel 4.0 de Linux resulta un poco raro, puesto que Linux no
tiene un núcleo sino que él mismo *ya* es el núcleo.
Simplemente diciendo Linux 4.0 ya se entiende que nos referimos a
El Martes, 4 de agosto de 2015 10:08:44 Rodolfo Edgar escribió:
Querramos o no windows es el sistema operativo mas amigable
Mira solo con esto te has lucido.
Esto no es un OT esto es una intrusión PROPIETARIA en una lista libre.
Así que respetar un poco a la lista, no estoy aquí para leer
Le terminal en question: roxterm
Il s'agit d'une wheezy avec passage lors de la transition à jessie.
Donc, quand je me déplace dans l'historique du terminal, et que j'appuie
sur la touche flèche haute, la dernière commande est bien rappelée
mais pas moi, j'entends par là que l'affichage ne
On Tue, Aug 4, 2015 at 11:16 AM, Nicolas George wrote:
You could try posting the output of amixer (with the correct -D option for
your card), someone may spot something not correctly routed.
Output is at the bottom. Also included a screenshot of alsamixer here:
66 matches
Mail list logo
