Re: New mdadm RAID1 gets renamed from md3 to md127 after each reboot

On 04.10.2021 03:41, Joe Pfeiffer wrote: That's not it then... googling "md127" I found a *bunch* of possible causes. I tried already updating the name attribute, setting the homehost to none and a few others. Unfortunately none helped.

Re: How to configure the network ethernet?

On Mon, Oct 04, 2021 at 12:10:39AM -0600, William Torrez Corea wrote: > enp7s0: mtu 1500 qdisc pfifo_fast state It says here - NO-CARRIER, which could mean that: 1) Your Ethernet cable is damaged. 2) Your card fails to negotiate speed and duplex settings. The usual troubleshooting steps here ar

How to configure the network ethernet?

*Network is not managed* enp7s0: mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000 link/ether e0:db:55:c2:58:45 brd ff:ff:ff:ff:ff:ff *I replaced the iptables by nftables* Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all

Re: No sound after bullseye install

On 04.10.2021 10:10, Bob Latest wrote: Hi, after installing Debian bullseye I can't get sound to work. I'm using lightdm + dwm, and I have pulseaudio installed. "pavucontrol" ist stuck on the message "Establishing connection to PulseAudio. Please wait..." I don't understand zilch about how soun

Re: No sound after bullseye install

Bob Latest wrote: > after installing Debian bullseye I can't get sound to work. I'm using > lightdm + dwm, and I have pulseaudio installed. "pavucontrol" ist stuck > on the message "Establishing connection to PulseAudio. Please wait..." > perhaps the pulseaudio server is not running - you can ch

No sound after bullseye install

Hi, after installing Debian bullseye I can't get sound to work. I'm using lightdm + dwm, and I have pulseaudio installed. "pavucontrol" ist stuck on the message "Establishing connection to PulseAudio. Please wait..." I don't understand zilch about how sound on Linux works, but my previous version

Re: New mdadm RAID1 gets renamed from md3 to md127 after each reboot

Reiner Buehl writes: > On 02.10.2021 01:32, Joe Pfeiffer wrote: >> Is it possible you need to update your init ramdisk? Maybe your changes >> to your mdadm.conf aren't being seen? > > I do run update-initramfs -u after each change. Shouldn't that be > enough to to update the mdadm.conf in the ini

Re: Printing bug: which package to report?

On 10/3/21 3:01 PM, David Jarvie wrote: I've found a new printing bug which I want to report, but I don't know which package to report against. My Samsung M2885FW printer now always prints double sided even when I set the duplex print parameter to Off. This is on Debian Bullseye. It didn't hap

Re: unhappy upgrade

On Sun, Oct 03, 2021 at 04:48:38PM -0700, Patrick Bartek wrote: > On Sun, 3 Oct 2021 12:49:12 -0400 > "Roy J. Tellason, Sr." wrote: > > I did do a download from their site. But it's not clear to me where > > I need to put it and how to tell the package management software > > about it. > > Did y

Re: unhappy upgrade

On Sun, 3 Oct 2021 12:49:12 -0400 "Roy J. Tellason, Sr." wrote: > On Sunday 03 October 2021 12:11:13 am Patrick Bartek wrote: > > On Sat, 2 Oct 2021 11:57:51 -0400 > > "Roy J. Tellason, Sr." wrote: > > > > > In recent messaging here I touched on how I'd determined that my > > > workstation wa

Printing bug: which package to report?

I've found a new printing bug which I want to report, but I don't know which package to report against. My Samsung M2885FW printer now always prints double sided even when I set the duplex print parameter to Off. This is on Debian Bullseye. It didn't happen when Bullseye was first released in A

Re: how to record sound being played using arecord

On 10/3/21 9:23 AM, Michael Lange wrote: Hi, Because the thing you wanted to do did *not* work for you? ;-) after loading them, they don't help, i can't hear anything from recording which commands exactly did you try? Did you set the capture channel to "Vol" either by some gui mixer or with

Re: [SOLVED] Re: Buster wget: The certificate of 'lists.debian.org' is not trusted

On Sat 02 Oct 2021 at 08:15:59 (+0200), to...@tuxteam.de wrote: > On Fri, Oct 01, 2021 at 03:18:22PM -0500, David Wright wrote: > > [...] > > > I have a buster system that was up-to-date from the last point-release > > and kernel (2021-09-10 18:22:47). > > > > The only certificate expiration pr

Re: Slow graphics on Intel Xtreme?

On Sat 02 Oct 2021 at 07:10:58 (+), Nils wrote: > Well, still... The thing is, that games that run flawlessly on Windows XP > have like 1 FPS on Debian. > So... It **does** have the ability to run these games. Should we be surprised that a laptop from 2004 works well with a contemporary Windo

Re: unhappy upgrade

On 10/3/21 09:21, Roy J. Tellason, Sr. wrote: On Saturday 02 October 2021 02:33:24 pm David Christensen wrote: On 10/2/21 08:57, Roy J. Tellason, Sr. wrote: In recent messaging here I touched on how I'd determined that my workstation was way behind being current. Apparently I needed to go 8->

Re: unhappy upgrade

On Sun 03 Oct 2021 at 12:55:43 (-0400), Greg Wooledge wrote: > On Sun, Oct 03, 2021 at 12:49:12PM -0400, Roy J. Tellason, Sr. wrote: > > On Sunday 03 October 2021 12:11:13 am Patrick Bartek wrote: > > > Reboot after each version upgrade, then do an apt-get update/upgrade, etc. > > > > Are you sugg

Re: unhappy upgrade

On Sunday 03 October 2021 01:13:19 pm Roy J. Tellason, Sr. wrote: > On Sunday 03 October 2021 11:02:46 am Roy J. Tellason, Sr. wrote: > (snip) > > > What amount of output does an apt-get update give you? > > > > Nine lines starting with "Get:", "Ign:", "Hit:" etc. > > > > "The method driver /usr/

Re: unhappy upgrade

On Sunday 03 October 2021 11:02:46 am Roy J. Tellason, Sr. wrote: (snip) > > What amount of output does an apt-get update give you? > > Nine lines starting with "Get:", "Ign:", "Hit:" etc. > > "The method driver /usr/lib/apt/methods/https could not be found." > > "Is the package apt-transport-ht

Re: unhappy upgrade

On Sun, Oct 03, 2021 at 12:49:12PM -0400, Roy J. Tellason, Sr. wrote: > On Sunday 03 October 2021 12:11:13 am Patrick Bartek wrote: > > Reboot after each version upgrade, then do an apt-get update/upgrade, etc. > > Are you suggesting that I go through that for all of the versions, one after > an

Re: unhappy upgrade

On Sunday 03 October 2021 12:11:13 am Patrick Bartek wrote: > On Sat, 2 Oct 2021 11:57:51 -0400 > "Roy J. Tellason, Sr." wrote: > > > In recent messaging here I touched on how I'd determined that my > > workstation was way behind being current. Apparently I needed to go > > 8->9->10->11. I trie

Re: unhappy upgrade

On Saturday 02 October 2021 02:17:43 pm Andrew M.A. Cater wrote: > On Sat, Oct 02, 2021 at 12:34:50PM -0400, Greg Wooledge wrote: > > On Sat, Oct 02, 2021 at 11:57:51AM -0400, Roy J. Tellason, Sr. wrote: > > > In recent messaging here I touched on how I'd determined that my > > > workstation was w

Re: unhappy upgrade

On Saturday 02 October 2021 02:33:24 pm David Christensen wrote: > On 10/2/21 08:57, Roy J. Tellason, Sr. wrote: > > In recent messaging here I touched on how I'd determined that my > > workstation was way behind being current. Apparently I needed to go > > 8->9->10->11. I tried the first of th

Re: unhappy upgrade

On Saturday 02 October 2021 12:34:50 pm Greg Wooledge wrote: > On Sat, Oct 02, 2021 at 11:57:51AM -0400, Roy J. Tellason, Sr. wrote: > > In recent messaging here I touched on how I'd determined that my > > workstation was way behind being current. Apparently I needed to go > > 8->9->10->11. I t

Re: unhappy upgrade

On Saturday 02 October 2021 12:27:26 pm Andrew M.A. Cater wrote: > On Sat, Oct 02, 2021 at 11:57:51AM -0400, Roy J. Tellason, Sr. wrote: > > In recent messaging here I touched on how I'd determined that my > > workstation was way behind being current. Apparently I needed to go > > 8->9->10->11.

Re: backup directory/file exclusion pattern list for borgbackup

On Sun, Oct 3, 2021 at 2:55 AM Andrei POPESCU wrote: > > On Sb, 02 oct 21, 19:56:02, Default User wrote: > > > > And . . . I make a special point of excluding: > > /media > > /media/* > > /mnt > > /mnt/* > > > > Why? > > > > Because long ago, when I was just learning to use rsync, I tried to > >

Re: How i can resolve the problem of packages?

On Sun, Oct 03, 2021 at 01:57:00PM +, Andrew M.A. Cater wrote: > On Sun, Oct 03, 2021 at 07:33:40AM -0600, William Torrez Corea wrote: > > *apt-get update * > > Err:13 http://apt.postgresql.org/pub/repos/apt buster-pgdg InRelease > > The following signatures couldn't be verified because the p

Re: How i can resolve the problem of packages?

On Sun, Oct 03, 2021 at 07:33:40AM -0600, William Torrez Corea wrote: > *apt-get update * > Err:13 http://apt.postgresql.org/pub/repos/apt buster-pgdg InRelease > The following signatures couldn't be verified because the public key is > not available: NO_PUBKEY 7FCC7D46ACCC4CF8 > Reading package

Re: How i can resolve the problem of packages?

*apt-get update * Err:13 http://apt.postgresql.org/pub/repos/apt buster-pgdg InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 7FCC7D46ACCC4CF8 Reading package lists... Done W: GPG error: http://apt.postgresql.org/pub/repos/apt buster-pgdg

Re: Bad animations in GNOME in Kernel 5.14

On Sat, Oct 02, 2021 at 05:47:56PM +, Arun Mani J wrote: > Hello everyone > > I recently installed Debian 11 in my friend's laptop; a Lenovo IdeaPad 3. > You can get its full details at - > https://psref.lenovo.com/Detail/IdeaPad/IdeaPad_3_15ADA05?M=81W1013MMB. > We then upgraded it to Testing

Re: how to record sound being played using arecord

Hi, On Sat, 2 Oct 2021 22:02:39 -0400 lou wrote: (...) > why shall i need OSS compatibility module if alsa works? Because the thing you wanted to do did *not* work for you? ;-) > after loading them, they don't help, i can't hear anything from > recording which commands exactly did you try? Di

Re: Up-to-date Bullseye, Power Save turned Samsung T55 Monitor off. Couldn't wake it up

On Sun, Oct 3, 2021 at 7:06 AM Marko Randjelovic wrote: > On Sat, 2 Oct 2021 15:48:39 -0400 > Kenneth Parker wrote: > > > HP Elitedesk 705 G1. Bullseye XFCE. > > > > I had a timeout set like usual. Before, I could jiggle the Mouse and > press > > the Shift Key and it would wake up, but not tod

Re: iwd: Using iwd to connect to a wireless network (Part 2 - DNS managers)

On Jo, 30 sep 21, 13:24:46, David Wright wrote: > > Nor I, but I certainly intend to try it out, and have read through > that Arch wiki page. It (iwd) is in buster, but then, so is wicd, > and I've been using wicd/wpa_supplicant for some years with no need > to change. I'm somewhat surprised that

Re: Dependency check: qml-module-org-kde-newstuff

On Du, 03 oct 21, 11:31:33, Hans wrote: > > My installation is not unusual. However, I am using aptitude and my > config says "do not install recommended packages". This configuration is your personal choice and the side effect of that choice is that you must deal with the occasional missing p

Re: Up-to-date Bullseye, Power Save turned Samsung T55 Monitor off. Couldn't wake it up

On Sat, Oct 2, 2021 at 4:46 PM Dan Ritter wrote: > Kenneth Parker wrote: > > HP Elitedesk 705 G1. Bullseye XFCE. > > > > I had a timeout set like usual. Before, I could jiggle the Mouse and > press > > the Shift Key and it would wake up, but not today. > > > > Fortunately, I was able to power u

Re: Problem installing

On Sb, 02 oct 21, 17:57:46, Charles Curley wrote: > On Sat, 2 Oct 2021 10:54:41 +0300 > Andrei POPESCU wrote: > > > > Not entirely. With no networking, the mini installer will make a > > > bare minimum installation from its build-in micro-repository. All > > > packages will be as of the date of t

Re: Up-to-date Bullseye, Power Save turned Samsung T55 Monitor off. Couldn't wake it up

On Sat, 2 Oct 2021 15:48:39 -0400 Kenneth Parker wrote: > HP Elitedesk 705 G1. Bullseye XFCE. > > I had a timeout set like usual. Before, I could jiggle the Mouse and press > the Shift Key and it would wake up, but not today. > > Fortunately, I was able to power up a Laptop, and SSH into the

Re: apt automatically upgrading packages in unstable

On Debian Sid I recommend disabling the unattended-upgrades services entirely: sudo systemctl disable --now unattended-upgrades On Friday, October 1, 2021 2:36:37 PM CEST Miguel A. Vallejo wrote: > A few days ago I noticed my debian unstable started to update packages > automatically. A quick ins

Re: Dependency check: qml-module-org-kde-newstuff

Hi Andrei, thanks for the response. > That would also make it very difficult to *not* install it for those who > have a good reason not to. > > As per Debian Policy 7.1: > > Recommends > > This declares a strong, but not absolute, dependency. > > The Recommends field should

Re: Dependency check: qml-module-org-kde-newstuff

On Jo, 30 sep 21, 09:08:37, Hans wrote: > Hi Marco, > > great job you did there! > > So, when I am looking at your results, it looks for me, that the package > qml-module-org-kde-newstuff is only recommended. > > But if so, IMO this then is a bug. Just because some things in systemsettings >

Re: How i can resolve the problem of packages?

On 10/3/21 5:28 AM, William Torrez Corea wrote: > I try update and upgrade the package with the tool APT but get the > following error: > > */apt-get update/* > Err:10 http://apt.postgresql.org/pub/repos/apt > buster-pgdg InRelease >   Las firmas siguiente

Re: How i can resolve the problem of packages?

2021-10-03 7:28 GMT+05:00, William Torrez Corea : > I try update and upgrade the package with the tool APT but get the > following error: [...] > ldconfig: Can't create temporary cache file /etc/ld.so.cache~: Read-only > file system Either remount filesystems to rw, if you mount it in ro before ru

Re: Problem installing

On Sb, 02 oct 21, 21:12:53, Igor Korot wrote: > > I think whoever made the decision to provide this mini.iso > is an amazing guy. As far as I recall that would Debian legend Joey Hess. > However, it needs to be documented better in regards to the > "SID" install. It's a wiki, please do feel fre