Hi all,
I have a sagem fast 800 (ueagle-atm) module on my gateway. I have
difficulties to synchronize because i'm far (very far) from the dslam.
So, when it loses synchronisation, the modem can take hours before
re-sync. Sometimes, it can't sync and I get error messages like these ones :
Oct
ench and I have many
links but only in my language.
HTH, Christophe
Volkan YAZICI a écrit :
On Fri, 22 Aug 2008, Bonnel Christophe <[EMAIL PROTECTED]> writes:
Why don't you bridge the interfaces of 192.168.1.10?
I don't have in depth experience with bridging, would y
Why don't you bridge the interfaces of 192.168.1.10 ? In that case, you
need to reconfigure client to point to 192.168.1.20 and you can sniff
your network via the 192.168.1.10 machine ?
Hope this helps,
Christophe
Volkan YAZICI a écrit :
Hi,
In one of our servers, I want to debug a network
hi,
hum, it looks like a ttl or mtu problem.
Do you use PPPoA for your internet connection ?
Try to open a google page with a web browser. If it works, enter a word
for a search (it should work) and now click on one of the links (it
should not work). If all this works, you have a mtu problem.
I have a fresh install of an i386-Lenny on my laptop and i try to use
bluetooth with it (my headset). I have many problems but the first of
all i think is this one :
When i do a "hcid -n -d", I have this output :
hcid[4732]: Bluetooth HCI daemon
hcid[4732]: Enabling debug information
hcid[4732]
I had a similar problem several months ago. I go to /etc/ssh/ssh_config
(on your franskenstein machine, not the server) and verify that you have
PasswordAuthentication no
Hope this helps
Christophe
Rich Healey a écrit :
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi, i've got a whole bunch
Christian Koerner a écrit :
Rehceb Rotkiv wrote:
Hello,
Hi Rehceb,
what is the proper way to automatically start a program after Fluxbox
launch? Most sources say something about ~/.xinit or ~/.xsession, but I do
not have/need these files because I launch Fluxbox from GDM (via a .d
T o n g a écrit :
Second check, as Douglas said, that the mac address are the same under
the 2 OS . . .
I haven't got around to reboot into window$ and check yet. But I believe
that they are the same. I'll post immediately if otherwise.
When your problem come back, use the command
T o n g a écrit :
Hi,
It's now the third time that I bumped into such situation. All of sudden I
suffer from network delay and package lost, can't ping DNS server but can
ping some IPs that is connecting to my box.
I have suspected my cable, kernel version, etc, etc, and until today,
after r
Guillaume a écrit :
Axel Minck a écrit :
Hi everybody,
I recently installed Debian on my computer (2.6.18 kernel).
After some time to configure the wireless internet access, I can:
- Ping addresses
- Go to Google homepage (sometimes I cannot even open Google)
-
Hi,
What type of ping did you try ?
1) does "ping XXX.YYY.ZZZ.1" work ? (If no, paste here the output of
"ifconfig" command)
2) does "ping 209.85.135.99" work ? (If no, paste here the output of
"route -n" command) (This is a google ip)
3) does "ping www.google.fr" work ? (If no, paste here the
331 1 IO-APIC-fasteoi eth0
20: 87 1 IO-APIC-fasteoi eth1
21: 0 0 IO-APIC-fasteoi libata
22: 302 1 IO-APIC-fasteoi libata
NMI: 0 0
LOC: 56035 56045
ERR: 1
MIS: 0
[EMAIL PROTECTED]:~$
-Original Message-
From: Bonnel Christophe [mailto:[EMAIL PROTECTED]
Sent: Friday, September 28, 2007 5:
I can suggest you, if you have 2 PC and you use IPv4, to try netio
http://freshmeat.net/projects/netio/
You need to compile this old program. But i used to test connection
speed between my machines and it worked pretty good.
Hope this helps
Christophe
Eric Estes a écrit :
I just purchased
My first idea, i had such a error with a static ip. The problem came
from a ctrl+space character I think or such a thing. Clean you
/etc/network/interfaces with the lines you have for eth0 and rewrite
them. Then verify if ifconfig eth0 up works.
Second idea, udev may not create eth0 instantly
Mitja Podreka a écrit :
Douglas Allan Tutty wrote:
On Wed, Jul 11, 2007 at 01:07:19AM +0200, Mitja Podreka wrote:
In the last few days I cannot connect to network with my laptop anymore.
It is a dual boot and in windows everything works fine. In Debian it
doesn't work anymore. I use Etch.
I remember an old option in kernel that asked you which size of ram you
think to be used. This option seems to have disappeared now.
If you want a 2.6.11 kernel, try to compile the kernel and search for
such an option...
Christophe
Nigel Henry a écrit :
On Friday 15 June 2007 16:46, arijit
Hi all,
I'm trying to be able to wake on lan a computer. I have tried directly
with ethtool but i have the classic error :
"Cannot get current wake-on-lan settings: Operation not supported"
So, after hours of searching on the web, i found that it's possible to
address directly the bus to have
Robert Cates a écrit :
From: Daniel Burrows <[EMAIL PROTECTED]>
To: Robert Cates <[EMAIL PROTECTED]>
CC: debian-user@lists.debian.org
Subject: Re: cannot access machine after apt-get dist-upgrade
Date: Mon, 04 Jun 2007 06:27:43 -0700
MIME-Version: 1.0
Received: from murphy.debian.org ([70.103
Hi,
I use gkrellm with the default plugin systemfile. It allows you mount
and unmount the drives you have specified with a button. The other
advantage is that, if you mount the partition with another tool, gkrellm
will detect it and still can be use to unmount it. Another information
that can
19 matches
Mail list logo
