I upgraded to latest stable when it came out, and after that my
suspend/resume functionality just started working(very nice), but now it
stopped working again. And I cant find anything that I've changed that I
think could have affected it.
I've seen onscreen errors some times that it cant freeze
T o n g skrev 2010-09-01 06:45:
Hi,
My ssh environment is so set up that I can do
rsync files m...@remote_host:/path
just fine without password whereas rsync files r...@remote_host:/path
would fail.
Under such setting what's the easiest approach to rsync files that I
can't read
I just found the xautomation(http://linux.die.net/man/7/xautomation)
package where the xte binary is, seems really handy, but what I'm trying
to do doesnt work for some reason.
I wanted to drag a panel to another monitor after turning it on with xrandr.
I tried to slow it down with the sleep
I have a small bashscript which prepares a dual-monitor setup for my
laptop, since i'm moving in and out of the office and meetings, I tend
to attach and disconnect the monitor a few times a day.
That works fine with xrandr, but the issue is that I would like some
gnome panels to move, and
Tomasz Pajor wrote:
Even updating to libc6-xen 2.11-0exp4 didn't help.
apt-get install libc6=2.11-0exp4 libc-bin=2.11-0exp4 \
libc6-xen=2.11-0exp4 libc-dev-bin=2.11-0exp4 \
libc6-dev=2.11-0exp4 libc6-i686=2.11-0exp4 locales=2.11-0exp4
(none):~# ldd /usr/sbin/apache2
linux-gate.so.1 =
I just got hold of a samsung 4g/lte modem, a usbstick which just came
out here in sweden. Putting it into my debian box, kernel 2.6.30, udev
recognizes it as a cd(with the driver) as expected. I blocked the
cd-recognition with a udev-rule and manually tried to load usbserial for
it, but no
I'm looking to improve the performance on one of our imap-servers since
its getting slow on large folders with 100k or more files in them. The
imapserver is courier imap(using maildir format), and I'll hope to keep
that as of now.
However, I read that reiserfs was more efficient than ext3
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
Just got djmount working and able to access my phone over upnp and wlan,
however, it seems to be limited to reading. Is that a thing by
definition in upnp sharing, or is it possible to enable writing as well?
Best regards,
Eric
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
I'm interested in allowing a few selected users forward their imap/smtp
traffic over ssh. But I also want to prevent them from doing anything
but that, they shouldnt be able to forward any ports, or get a shell at
all, just some certain
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Evgeny M. Zubok wrote:
Mike McCarty [EMAIL PROTECTED] writes:
With such a tiny amount of RAM, I think you need DSL (D*mn Small Linux).
The main problem is the Linux kernel's swapping. It is slow regardless
the distribution and kernel (2.4 or
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Miles Fidelman wrote:
Steve Kemp wrote:
On Tue, Oct 03, 2006 at 04:27:48PM -0400, Miles Fidelman wrote:
www.webmin.com
That doesn't scale much more than ssh'ing into multiple machines
and running repetivite tasks. For 10 machines
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
I have a bunch of debian installations och a few servers, is there some
good tool to manage them all effectivly, they dont necessarily contain
the same configs. Any hints or links in a good direction would be
appreciated.
/Eric
-BEGIN PGP
What can I do to prevent that I need to type
sudo mknod /dev/fuse -m 0666 c 10 229
upon every boot when I like to use for example sshfs?
/eric
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Have anyone attempted to use the frwd sportscomputer(any model) with
linux? Have looked around but without luck so far.
Will contact their support as well, but I assume they just play well
with windows. :(
Anyone tried or have any thoughts?
Best,
Eric
--
To UNSUBSCRIBE, email to
Hi,
I have a few servers running debian, and I like to automate the update
and maintainence of the packages for them. I usually try to run aptitude
update and aptitude upgrade on a regular basis, but I would like to do
this automatically, but in a safe way.
I'm not sure I can just put the
Hi,
I'm using debian testing on my laptop, and recently after upgrading the
system I have found that the gnome terminal(v.2.14.1) window confuses
emacs(text variant) when I use tabs in gnome terminal. It works well if
not using tabs, but if used it borks emacs.
The strange thing is that it
Hi,
I'm having trouble on a new server where I'm trying to remove exim4 and
instead use qmail(which I install from source). How should I do to make
the dependencies of exim4 work but still be able to use qmail?
/eric
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of
Christopher Pharo Glæserud wrote:
Eric Persson,
I'm having trouble on a new server where I'm trying to remove exim4 and
instead use qmail(which I install from source). How should I do to make
the dependencies of exim4 work but still be able to use qmail?
You could create a dummy package
Andrew Sackville-West wrote:
On Sat, Apr 08, 2006 at 12:13:02AM +0200, Eric Persson wrote:
Hi,
I have an old laptop which i've been trying to install debian onto, but
since it neither has cd or floppy or the ability to boot from
usbdevices, i figured i could take out the harddrive and put
Hi,
I have an old laptop which i've been trying to install debian onto, but
since it neither has cd or floppy or the ability to boot from
usbdevices, i figured i could take out the harddrive and put it onto a
usb-ide adapter and load it through my other computer.
It worked well until I get
Hi,
I develop quite a lot of webapplications and i also try to make the
debugging as easy as possible, but when it comes to sending mail, its a
bit cumbersome, especially when not on a real network.
I would like to have something like a drop in for the sendmail binary
that either just
I've heard of lots of people running Linux on IBM
Thinkpads, but I can't seem to purchase one from
Lenovo without Windows.
I like my dell inspiron 9300, although its very good technically, it
could benefit for some better physical quality, but I guess it depends
on how much you carry it
Hi,
I have a server that repeatedly remounts its / harddisk readonly,
probably caused by the errors=remount-ro in fstab. I read the following
about it on the web:
Specifies that if errors are found when the filesystem is checked, the
filesystem will be remounted in read-only mode so that
Dave Sherohman wrote:
If that's the cause (and I agree that it almost certainly is), then
in means your drive is encountering errors.
What kind of errors, any errors?
Overfiend Thunder-: when you get { MessagesLikeThisFromYourHardDrive }
Overfiend Thunder-: it either means {
Adam Porter wrote:
This doesn't answer your question, but I mount my partitions with noatime.
You might consider that.
Yeah, I noticed that, I just hadnt the oppurtunity to reboot or remount
the drives currently. What are your experience of it performancewise?
/Eric
--
To UNSUBSCRIBE,
Hi,
I just found some info about it beeing a good idea to chattr +A on
Maildirfolders to prevent that disk i/o is wasted on writing the last
accessed time, which is irrelevant in the case.
As I'm just trying it out, I figured, if I chattr -R +A on a folder,
will it apply to new files as
Hi,
Just downloaded and tried to configure/compile/install kernel 2.6.15
from kernel.org. That worked good so far, but when trying to start gdm
the computer hangs, and stops responding on anything, even tried ssh
into it without result. :(
however, gdm works when I'm using the vesa driver
cody chamberlain wrote:
did you upgrade your xserver around the same time as well? i had a very
similiar issue that was due to the xserver-xorg 6.9. are you able to
start gdm normally with your older kernel?
Yes, works like before on my old kernel, a 2.6.12. I ran aptitude
upgrade last week,
Hi,
I've been trying to play around with mdadm and software raid, but got
some problems, I have two sata disks(80gb) which Im trying to mirror, i
did it during the installation of debian testing. And it seems like it
worked well, but then I started testing to unplug one disk at the
time(with
Hi,
I just plugged in a usbbarcode reader and doesnt really work, i got the
following in dmesg
usb 1-1: new low speed USB device using uhci_hcd and address 2
usbcore: registered new driver hiddev
usbhid: probe of 1-1:1.0 failed with error -5
usbcore: registered new driver usbhid
Hi,
Have anyone successfully installed debian on a hp dl360 with the smart
array 6i controller. It seems like the smart array 5 is supported but
not the 6 and I havent found any success stories either.
And I would really like debian on it and not the damn redhatstuff.
Can anyone give me any
Hi,
I'm using a debian testing environment on my laptop, and most of the
stuff works good now, but printing is still a bit strange.
I can print pdfs with gpdf, and documents from openoffice, but I cant
print anything from firefox, even though I select the same printers in
the menus.
I
Hi,
I have installed debian testing on a dell inspiron 9300 laptop and most
of the hardware now works, however, the dvdburner does not work yet. It
isnt even recognized in the dmesg output. It seems that the dvdburner is
on the ide interface while the harddrive is connected to the new
Is is possible to install apm support in the kernel through
module-assistant? I havent found any packages that seems to do this, I
really like to keep the stock kernel, but just add apmd support. Or do I
need to do the whole compile new kernel stuff?
Btw, thanks to everyone that makes debian
Joe Mc Cool wrote:
how can I use my woody box to send free text messages to a mobile phone
(in the UK) ?
You can always install gnokii, you'll need a phone and it wont be free,
but it will probably work better. :)
www.gnokii.org
//Eric
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a
Hi,
I've been looking around after a package tool like deb or rpm, but
havent yet decided which one to use. I have a range of servers with
redhat/fedora and a bunch with debian. The plan is to migrate over to
debian within 2 years, so .deb would probably be best.
But where can I read about how
Jeff Hurst wrote:
# CONFIG_CRAMFS is not set
You need cramfs in the kernel to read the initrd
Wow, that did the trick, booted nicely with cramfs and a initrd.
Is there no place to read stuff like this? kernel.org is not very
informative, it would be nice with a kernel-config-validator that told
Hi,
I've been trying to recompile my kernel to a 2.6.8 one on debian sarge.
But no matter what I do it seems to get kernel panic when I try to boot.
See the message at
http://www.persson.tm/debian_install/debian_boot_2.6.8.gif
hda3 is the debianpartition mounted / with ext3 on it. I found a
Bob Alexander wrote:
Eric,
what bootloader are you using ? Please post what is in your lilo.conf or
grub/menu.lst
I'm using grup and the contents of my menu.lst is at
http://www.persson.tm/debian_install/menu.lst
Aslo,
what version of sarge are you using ?
cat /etc/debian_version gives me 3.1
39 matches
Mail list logo
