Can someone recomend an app, and maybe linkage to docs, for creating an
image of system partition? As well, what about restoring the image in
case of disaster/emergency?
I just spent the whole weekend rebuilding 2 routers and 1 server:-( Good
learning experience, but at my age, I'd prefer to sp
My router is a dual-homed P1 box that runs Woody. I would like to do a
clean install in the near future. After it is all set up, and before I
take it online for the first time, what steps are involved to slimming
it down and securing it?
Maybe a few tips or linkage to good docs on the topic woul
On June 7, 2004 12:17 am, Rodney D. Myers wrote:
> How do I convert a server which has a static IP, to become a DHCP
> server? I know I need the DHCP server installed, but is there more than
> that?
My router, which runs woody, has these lines in: etc/network/interfaces:
auto eth1
iface eth1 in
Hello. I am currently running woody ( kernel
2.2 ) on my router ( IPCHAINS ). It does not do firewalling, or
port forwarding to internal computers. It only serves as a gateway for
computers on my network to access the internet.
I would like to do a fresh install on this machine
with woody an
>
> I have a problem restoring lilo as my boot manager from a debian/windoze
> installation. It is a laptop only with usb floppy/cdrom.
> The windows installation is on hda1 and the debian installation is on
> hda6.
> I have tryed to boot with "toms root boot" and some other boot disks, but
> no l
hey all. what network cards are recomended for using with woody ( or
sarge for that matter )? i have a couple that work right now and am
about to set up a few new boxes and was wondering what the least
botherome nics are.
thanks
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of
Hello. Just can't seem to get this old 486 configured as a router.
The problem lies in the that I cant get both nics configured, loaded and
bound to eth0 and eth1.
I am able to load either of the 2, but never both at the same time. They
are identical dlink, ISA 220 cards and use the "ne" module.
Hello all once again. Still picking away at this
project. Trying to transform 486 into multi-homed router/firewall.
The 2 nics are identical dlink 220 isa cards.
eth0: io=0x300
irq=10eth1: io=0x240 irq=3
Through this list and
googleing I have come up with the information below.
Can anyone
Bill wrote:
> When installing Debian I was asked if I want to use apt-get online or from
> cdrom. I chose cdrom but now I would like to go on line. Do I have to go
> through the dbconfig again, or is there another way of doing it. I would
> really like to use either cdrom or online.
>
> Thank yo
Hello all. Almost there. Still working on this 486. Hopefully it will be a
routing, firewalling box. The 2 nics in this box are dlink 220 isa. I have
been able to determine that they both require the "ne" network module. The
problem is that I can not get both eth0 and eth1 working at the same ti
In response to my difficulty installing the second of 2 isa dlink 220 nics(i cant
determine the io address of the 2nd card), mess-mate wrote:
> If they are isa then (informatical) you need 'isapnptools' and to do a isapnp dump.
> Then a config of /etc/isapnp.conf is needed. There you chose the
Hello. I'm doing a reinstall on my system. Went to install my graphics card
and discovered that my unofficial source for nvidia debs wasn't available
anymore. Can anyone point me in the right direction? I was under the
impression that there aren't nvidia sources available as debs in the
offici
Hello all. Could someone suggest, or better yet provide an example, a way
to edit a sources.list file so as to have the most up to date debian
desktop system possible. Suppose I could just install Knoppix but that
would be to easy. I have done some experimenting, but every time I appear
to have
ok, i have determined how to mount my win32 patitions as well as mounting the
cdrom. how do i mount a regular audio disc on my cdrom?
thanks
long live debian
james
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Can anyone suggest a package for converting video to mpeg-1?
And while were at it, what do woody users prefer for burning:
music compositions, vcd, iso etc...?
Thanks,
James
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Well, after fussing with the upgrade from SB ISA 16 sound to SB PCI Audigy
I finally have sound in Woody again. Used this walkthrough as a "rough"
guide. Hope it helps someone else!
http://www.linuxorbit.com/modules.php?op=modload&name=Sections&file=index&req=viewarticle&artid=541&page=1
--
T
Hello all. My experience with debian has been great so far. When first
started using, I had gotten my sound blaster isa sound card working without
much probs. Now, since upgrading to a SB Audigy, I just cant seem to get it
working. Does anyone know of a good site for tutorial/walkthrough to help
Thus spoke Abrasive:
"I just installed a fresh copy of Debian 3.0r1, and in order for my
hardware to work, I need
to upgrade the kernel to a 2.4.x version."
Well, in addition to being able to boot the 1st of the 7 installation cds
to get a base install, you can also boot using the 5th cd in
Hello all. Can anyone suggest, or would you even recommend at all for that
matter, some good non-official apt sources for debs that are not officially
supported by the project? Particularly for software that is not available
in any of the current active branches of woody. And while were on the
Hello all. Can anyone suggest, or would you even recommend at all for that
matter, some good non-official apt sources for debs that are not officially
supported by the project? Particularly for software that is not available
in any of the current active branches of woody. And while were on the
Hello. Can anyone tell me the command to mount a local fat32 file system?
Also, can I add this to my fstab? Thanks!
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Hello all. Having trouble getting sound running under stable woody since
upgrading sound card to SB Audigy from SB 16. Did get my gforce4 vid card
working thanks to this list! Can anyone point me to a good
walkthrough/tutorial? Currently running kernel 2.4.18 with soundcore module
installed. Th
Setting up woody on my main box. Using geforce4 mx pci video card. After
installing x and running starx, I get error messages stating "no screens
found". When installing x, I had chose the nv server. Was this correct? Had
good experiences on my test comp with Debian and would really love to get
Hello, you guys have been very helpful in the past so heres another one
for yus!
I'm about to take the plunge and pick up a laptop. My first laptop in a
number of years.
So, what, if any, suggestions comments or what have you might the experts
suggest I consider
when making my decision on a b
Hello,
Can anyone suggest a modem i should consider for installation on our woody
3.0_r1 boxes?
Thanks,
James
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Hello,
Could someone be so kind as to recommend a model and brand name of laptop I
should consider purchasing to run debian on? Thanks in advance, you guys
have been real helpful!!
James
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PRO
Hello, what server and channel should I join to talk with other debian
users? Thanks in advance!
James
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Hello, relatively new debian user here. Could someone please point me in
the direction of a good tutorial on linux file systems. I guess I just cant
get myself out of thinking the ms-dos way:)
Thanks,
James
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble?
Hello, could someone please give detailed info on obtaining the latest
stable version of woody. Instructions on where to go(FTP preferably)and
what exactly to do would be greatly appreciated:).
Thanks,
James
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble
Hello,
We currently run a variety if Debian products in the mail and file serving
areas. Now we are investigating the possiblity of running Debian products
on our desktops. Could someone please recommend what packages we should be
running in the following areas for our desktop machines should we
31 matches
Mail list logo
