libstdc++.so.2.7.2( glibc) and libstdc++.so.27 (libc5) question

find these old libraries (2.7) ?? ir. Marc Fleureck[EMAIL PROTECTED] tel: +32-(0)2-2085311 fax: +32-(0)2-2085320

Mail client (POP3) for both linux and Windows NT ?

ir. Marc Fleureck[EMAIL PROTECTED] tel: +32-(0)2-2085311 fax: +32-(0)2-2085320

How to read/interpret X server output (Matrox G200) ?

ir. Marc Fleureck[EMAIL PROTECTED] tel: +32-(0)2-2085311 fax: +32-(0)2-2085320 XFCom_Matrox Version 2.2/ X Window System (protocol Version 11, revision 0, vendor

Can't load libc5.so.m when starting XFree 86 (3.3.2)(matrox G200 card)

and libc6(2.07u). Rest is hamm i think. I don't know anything about compatibilty (libc5 -- libc6). Please point me in the wright direction. Please e-mail. Thanks. Regards, Marc ir. Marc Fleureck[EMAIL PROTECTED] tel: +32-(0)2

Debian2.0/XFree86 3.3.2.3 on TOSHIBA 4400: X does not start

should know the chipset in order to get the correct X-server ?? How ?? Regards, Marc __ Marc Fleureck Ministry of Agriculture Brussels Belgium ___

Error in loading shared libraries (libz.so.1) from xbase_3.3.2.3-2

mkfontdir also gives the same error. Is it broken ? I already installed successfully xbase_3.3.2.3-2 + xlib6g_3.3.2.3-2 Marc __ Marc Fleureck Ministry of Agriculture Brussels Belgium ___

Install NTFS drivers (Debian 2): gcc not OK ?

Hi there, I am trying to install NTFS driver on Debian 2.0 .The INSTALL sais to do ./configure which checks the gcc compiler (2.7.2.3-2): C-compiler cannot create executables What's wrong with gcc ?? Marc __ Marc Fleureck Ministry

Question about include files and recompiling kernel

files without having to hack around like that ? Please mail. Many thanks in advance, Regards, marc __ Marc Fleureck Ministry of Agriculture Brussels Belgium ___

Compile new kernel without losing old one

Hi, What are the steps to return to the original or previous kernel if (after compiling a new kernel) the new kernel srews up my system ? Thank you very much in advance. lease mail. Marc __ Marc Fleureck Ministry of Agriculture Brussels

Kernel 2.0.34 for AIC 7890 and 3com cyclone (3C905B)

__ Marc Fleureck Ministry of Agriculture Brussels Belgium ___

Can someone send me patch for asus SCSI 7890 (aic7xxx) ?

... ?? Regards, Marc __ Marc Fleureck Ministry of Agriculture Brussels Belgium ___

Make linux bootable directly to hard disk fails (NT4 installed)

__ Marc Fleureck Ministry of Agriculture Brussels Belgium ___ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

dselect and ftp: Packages file not found

Hi, If I use dselect with ftp access, it complains about a missing Packages[.gz], although I am sure it's there (I checked this manually with ftp). Here are the details: ftpsite=ftp.eunet.be username=anonymous ftpdir=/pub/linux/debian distribs=bo It sais: Cd to /pub/linux/debian/...

compiling the kernel - as86 missing

Hi, The command as86 is missing to compile the kernel. It's not on my disk. Where can I find this command ? Regards, Marc -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .

activate VFS for kernel with module support - how ?

Hi, I compiled a new kernel with module-support. It tries to boot and sais: kernel panic VFS: unable to mount fs Seems logical. I didn't activate the VFS-module. lsmod doesn't give it in the list neither. I must load something.o with insmod. But where can I find that something ? Should it be

Missing include file while configuring kernell 2.0.32 ??

Hi, I installed the kernel source 2.0.32. I just executed what the README file tells me to do, but when I start make menuconfig things go wrong. Why doesn't it find the include files ??? The first thing make does is compiling the file lxdialog.c, so gcc is invoked by make. lxdialog.c

setting up pcmcia - hostname(none)- problem

Hi, There has been a great amount of progress since I have tried to configure my pcmcia card (3c562) thanks to great help I received from people on this list. Thanks ! However, there is still a problem. I get the following errors at boot time: hostname: can't open '(null)' SIOCSIFADDR: no

repost of problem

Hi, I had to re-subscribe too. Now I receive again all mails from the list (since Friday or so). I don't receive responses though from mails I sent Friday or yesterday, so I guess there must still be some mail problems on the internet ? To be sure, could anyone of the following people show

Debian/WindowsNT partitioning

Hi, System: PC with SCSI Quantum hard disk 3G and NT4 installed I have created 3 primary partitions of type NTFS I would like to create 2 linux partitions: system+swap but cfdisk gives an error when writing the partition table: FATAL ERROR: Cannot seek on disk drive I am able to recover using

Compile kernel 2.0.30 / Debian 1.3 ?

Hi, System: Debian 1.3/kernel 2.0.30/pcmcia 3com 562D/563G card My goal is to recompile the kernel2.0.30 in order to solve some bug with pcmcia.(see below for the error message at boot time) I have installed pcmcia-source_2.9.6-3, same for pcmcia-cs and pcmcia-modules. Also

Upgraded Debian. Upgrade installation diskettes ?

I have upgraded Debian 1.2 to 1.3 (also upgraded kernel 2.0.27 to 2.0.30). Should I upgrade the installation diskettes too ? (rescue, boot, base-1/4, drivers). Or can I use the old ones ? Regards, marc -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] .

addendum to Upgrade Debian. Upgrade install diskettes ?

Hi, System: Debian1.3/Kernel2.0.30 (upgraded from Debian1.2/kernel2.0.27) It seems that every time i boot from an upgraded rescue floppy and run the network setup, my system doesn't initialize the network card anymore. It sais: cardmgr: loading failed. The module symbols (from linux 2.0.30)

set up network correctly ?

Hi, System: Debian 1.3/kernel2.0.30/3c562-3d Lan+Modem adapter I have just set up my PCMCIA card without any erros. That is i don't get any errors at boot time. Card Services 2.9.6 co recognize the card. During installation of Debian 1.2/kernel 2.0.27 i have setup the network (ip-addresses,

upgrade debian1.2 to 1.3

Hi, When I want to upgrade from Debian 1.2 to 1.3 following the instructions in the Web page i get the following error: dpkg -i ldso_1.8.10-2.deb ... ldconfig:warning:can't open /usr/local/lib, skipping... I get the same with package libc5*.deb The system does not do the upgrade.

Upgrade Debian 1.2 to 1.3

Hi, Recently I reported a problem about upgrading to 1.3 using some dpkg-commands, which caused an error style can't open /usr/local/lib. This problem was solved by simply creating the dir. But the system has not done any upgrade. Even after running lilo (and rebooting of course). The file

Booting Debian 1.2 Linux 2.0.27 fails

Hi, Created 3 NTFS partitions with Partition Magic on a 3.3 Gb SCSI disk. My system is: NT4, Pentium200, Quantum Fireball ST3.25 hard disk, CI-2520/2560 SCSI controller (NCR ?), Stealth 3D 2000, 3com Etherlink XL (3C900) I wanted to boot Linux in order to create an extended partition for /,

cpp

Looking for cpp 2.7.2.3-1 but not in unstable (interpreters). Where can i found this ? Marc -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .

losing track

Hi, I run debian 1.3/kernel 2.0.30 and have PCMCIA card 3C562D/563D. I am trying to access the network. I began installing pcmcia-cs 2.9.5-3 together with pcmcia-modules 2.9.5-3. So I had to upgrade to kernel 2.0.30, which I did. This still gave problems when starting PCMCIA (it finds the

mailing list

Is there any way to browse this mailing list without subscribing to it ? Does anyone know ? Regards, marc [EMAIL PROTECTED] -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .

dpkg-source

3 files in dir to install sources: *.diff.gz, *.orig.tar.gz and *.dsc dpkg-source -x fails with: diff patches file whose dir does not appear in tarfile I could comment some lines in *.dsc for the dir specified in the error message, but I don't understand the formats. How does it work ? So I

network settings

Which command/utility should I run to reconfigure network settings (IP, hostname, gateway, etc ...) ? Regards, Marc -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .

pcmcia/linux2.030 kernel and new problem

The new kernel 2.0.30 boots ! Thanks for all the tips. Card Services 2.9.5 starts and recognizes the card ! but .. with another error from cardmgr: Loading failed ! The module symbols (from linux_2.0.30) don't match your linux_2.0.30. Eh ? It tells this after executing

linux and windoz

For a long time I dream about running windoz on top of linux. I would feel very comfortable runnig ms-office or other windoz programs next to linux programs. (besides, the organisation I work for has standardized on windows (NT4)) Maybe I don't hate windows enough ? To make a long story

tar archive overwritten

URGENT. I know this is not the wright place to ask this kind of question, but it is a very urgent one ! My news server is down, so I try here. It could have happened on a linux system too ! Here's the problem description: System: Unisys SMP5400, Pentium P5/EISA, Sys 5R4 (4.0.2). Tar archive

pcmcia 2.9.5/linux 2.0.30 kernel and new problem

The new kernel 2.0.30 boots ! Thanks for all the tips. Card Services 2.9.5 starts and recognizes the card ! but .. with another error from cardmgr: Loading failed ! The module symbols (from linux_2.0.30) don't match your linux_2.0.30. Eh ? It tells this after executing

dpkg-source error ?

Hi, I ran dpkg-source (dpkg-dev 1.4.0.8) on 3 files: *.diff.gz, *.dsc and *.orig.tar.gz, as you described in the readme (dpkg-source -x *.dsc). Its says: Can't locate POSIX.pm in @INC at /usr/bin/dpkg-source line 8. BEGIN failed--compilation aborted at /usr/bin/dpkg-source line8. My system

install new kernel 2.0.30 ??

Hi, I have installed a package kernel-image-2.0.30deb to upgrade from 2.0.27. I used dpkg -i packname.deb. All went well. After a reboot, the system still says it has the old kernel (uname -r). Should I say switchkernel or something ?? Regards, Marc e-mail:[EMAIL PROTECTED] -- TO

graphics accelarator cards ?

Does somebody know what cards are compatible and give good performance ? Is e.g. Matrox a good choice (say Matrox Mystique or Matrox Millenium) ? What's the difference between Matrox Mystique and Matrox Mystique ii ? Regards, Marc e-mail:[EMAIL PROTECTED] -- TO UNSUBSCRIBE FROM THIS MAILING

Upgrade from an older Debian system ??

Hi, Thanks to everyone willing to reply to (sometimes annoying ?) questions ! I am not a newbee to Linux, but somewhere in between I guess ... My system is Debian 1.2 with kernel 2.0.27 and a pcmcia 3c562/563 33.6 LAN/modem card (Olivetti echos p100d). Heaving read the Web page about upgrading