Hello allI just upgraded to a custom compiled 2.6.18 kernel on my debian etch box, and my network card uses the tg3 driver loaded as a module.However when I am booted up into 2.6.18 and try to connect to some HTTP sites or even ssh, some times they hang, and same with apt-get upgrades. If I down
On 9/8/06, George Borisov [EMAIL PROTECTED] wrote:
Hello,You need to add some rules on the FORWARD chain, as well asenable forwarding in the kernel(echo 1 /proc/sys/net/ipv4/ip_forward)Yes it did help, an easy way to fix the ipmasq for the routing table was just to copy the files in
Hello allI'm running a Debian testing box, and am trying to use Openswan to connect to some IPSEC VPNs to create network to network VPNs.I have no issues configuring OPENSWAN to connect to the remote end, but the problem that I am having is that the ipmasq firewall rules I assume are dropping the
Hello allI have a Debian etch box with a custom complied 2.6.16.1 kernel, running a Tyan motherboard and a Xeon processor (started with Tyan GT20 barebone). Currently there are 4 gigabytes of ram installed on the motherboard, as reported in BIOS, but in Debian the amount of memory shown is the
] wrote:
On Sun, Aug 06, 2006 at 11:35:21PM -0400, Prepaid wrote: Hello all I have a Debian etch box with a custom complied 2.6.16.1 kernel, running a Tyan motherboard and a Xeon processor (started with Tyan GT20 barebone).
Currently there are 4 gigabytes of ram installed on the motherboard
those along with rrdtool and snmp data collection are a good start.the more effort you put into it the better results you'll get out of it!On 8/6/06,
shell [EMAIL PROTECTED] wrote:
Bryan Frchette 写道: Hi i would like to know if anyone has a php app that can show bandwidth and uptime graphs or
On 6/3/06, Roberto C. Sanchez [EMAIL PROTECTED] wrote:
Jeffrin Jose wrote: hello all, i have net connections from two isp's. but i want to use the bandwidth of both the isp's together. one is dhcp eth0 other is ppp0 with GPRS
iam not able to use both the bandwidth together. is there any problem
On 5/27/06, Mark [EMAIL PROTECTED] wrote:
On Sat, May 27, 2006 at 09:13:43AM -0400, Roberto C. Sanchez wrote: Prepaid wrote: Hi So I'm trying to configure a Debian Etch box that is connected to 2 internet connections (WAN) both have static IP configurations and work
fine if a default route
HiSo I'm trying to configure a Debian Etch box that is connected to 2 internet connections (WAN) both have static IP configurations and work fine if a default route points to only 1 of them and 1 LAN connection.
I've followed the directions at: http://lartc.org/howto/lartc.rpdb.multiple-links.html
9 matches
Mail list logo
