On Mon, Sep 03, 2001 at 10:47:40PM -0400, Hall Stevenson wrote:
* J. D. Kitch ([EMAIL PROTECTED]) [010903 19:16]:
I had a working GNOME install from Woody. I just updated to Sid, and
everything seemed to go quite nicely, but now in GNOME, or rather
anything that uses GTK, I see only a bunch
Do you have the wireless tools (iwconfig, etc?) Try here:
http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html
The 'key' option to iwconfig is what you're looking for. More links can be
found here:
http://www.seattlewireless.net/index.cgi/WirelessSoftwareLinks
On Tue, Mar 27, 2001
On Sat, Mar 24, 2001 at 03:51:29PM -0600, Adrian Kubala wrote:
On Saturday 24 March 2001 03:29 pm, you wrote:
My initial thought was that 'setxkbmap' was failing because you didn't use
the -layout switch, but 'setxkbmap [dvorak|us]' works fine here. Sorry I
can't be of more help. I know
I use the XF86Config file to set dvorak mode with XFree86 3.3. Here are the
relevant lines from the keyboard section in /etc/X11/XF86Config:
Section Keyboard
ProtocolStandard
AutoRepeat 500 30
XkbModelpc102
XkbLayout dvorak
XkbKeymap xfree86(us)
EndSection
If
I've had Debian on my Portege 3025 for nearly two years. The initial
install was a bit rough because it wouldn't boot from Slink boot disks. I
had to use loadlin from a WinDOS98 partition. The Potato boot disks seem to
work fine, at least on this machine.
A search at
I installed Potato under VMWare 1.x a while back and I recall having to use
the 'safe' boot disk.
On Sat, Mar 03, 2001 at 12:47:51PM -0600, ktb wrote:
I'm trying to set up vmware in order to test debian boot floppys.
VMware installed fine on slink, 2.4.1 kernel.
The problem I'm having is
Use ALSA, it works beautifully.
On Sat, Mar 03, 2001 at 04:49:59PM -0500, Jeffrey Nowakowski wrote:
My motherboard has a builtin sound card using the VIA VT82C686A
chipset, but when I try to load sound support with:
# modprobe via82cxxx
I get the following:
I put this in my .bashrc ...
function aoeu() { if [ -n $DISPLAY ]; then setxkbmap -layout us; else
loadkeys /usr/share/keymaps/i386/qwerty/us-latin1.kmap.gz; fi; }
function asdf() { if [ -n $DISPLAY ]; then setxkbmap -layout dvorak; else
loadkeys
This might help get you started or give you some ideas.
#
# somewhere in the initscripts after portmap and nfs are running ...
# perhaps in /etc/init.d/nfs-kernel-server
#
IFACE=eth1
NFSPORT=`rpcinfo -p | awk '/udp.*nfs$/ { print $4; }'`
ipchains -A input -i $IFACE -p udp --destination-port
I cannot seem to get the raidtools working on a sparc. I was hoping that
someone here could help out. Before I start, let me note that I've been
using Debian with raidtools on several x86 machines for quite some time
without any troubles.
The machine is an Ultra 2 Enterprise (sun4u, SBUS,
Your best bet is to convince your network administrator to use masq
modules for these things.
I believe netmeeting uses H.323. I remember seeing an H.323 module at
http://ipmasq.cjb.net/.
I just wrote a microsoft messenger module yesterday (what a coincidence!)
You should be able to login
I recently switched to mutt after using pine for a couple of years. I had
never really tried it before and the comments here persuaded me to give it a
shot. I also use procmail to filter my mail. Here's some things that I've
done over the past couple of days to make reading mail more pleasant:
Is there a general disapproval from service providers regarding
servers? I wasn't planning on a news server, but I do have a web
server and ftp server (in addtion to sshd) on my machine. If possible
I would also like to run a mailing list.
I think that in general, the cablemodem providers
Sounds like there's a fetchlimit being set somewhere. Do the remaining
messages get fetched if you run fetchmail again?
See man fetchmail and look for 'fetchlimit' and similar.
---
The most effective Windows NT remote management tool? A car.
On Mon, 8 Jan 2001, cls/cs wrote:
debs,
I don't have any experience with DSL, but I can tell you about the ATT @home
setup. Most of the networking stuff should apply to either, but you
should *insist* on an external adapter with a ethernet connector to your box.
I've been using a 5x86-133 machine for my linux masq gateway for about 4
And mine...
fennywood:/usr/src# update-alternatives --display cc
cc - status is auto.
link currently points to /usr/bin/gcc
/usr/bin/gcc - priority 20
slave cc.1.gz: /usr/share/man/man1/gcc.1.gz
Current `best' version is /usr/bin/gcc.
The question is a bit vague, but I would suggest looking at rinetd.
On Mon, 14 Aug 2000, Kelly Corbin wrote:
Any one know how to set up a proxy server for a particular port in
Debian? Couldn't find any info in the archives. Any help would be
appreciated.
Thanks!
Kelly Corbin
--
I just got an @home cablemodem last weekend and I've been running ipmasq for
quite some time over a normal dialup. The short answer is that you can
connect as many computers through your service as you like, using only one
IP address, and you don't really need two ethernet cards in any of the
The third number in each of the addresses below should be 1, not 10. Sorry
about the typos.
ipchains -A forward -s 192.168.10.0/24 -d ! 192.168.10.0/24 -j MASQ
Configure the machines A, B and C with their gateway set to 192.168.10.1 and
setup their DNS, and your should be set.
The system defaults for X apps are under usr/X11R6/lib/X11/app-defaults. The
user preferences are read from ~/.Xresources and/or ~/.Xdefaults. The
preferences for colors and what to do with ^G (the beep) can be set in these
files. The manpages for xrdb and xterm should be helpful also. To save
My only concern is that these are x86 machines, not Sparcs. My experience
is that Linux does not run as well as Solaris on the Sparc platform.
Specifically, RedHat 6.1 on a SUN4U box doesn't seem to play very nice with
the SCSI controller and the entire machine pauses for noticeable periods
Try using xmessage, eg.
if [ $new_mail_received ]; then
xmessage New Mail
fi
On Tue, 1 Aug 2000, Brian Stults wrote:
Hi,
Not entirely debian related, but... Can someone recommend a simple
language that I could use to write a pop-up message program for X? I
would like to be notified
Here is my lilo.conf:
boot=/dev/hda
root=/dev/hda1
compact
install=/boot/boot.b
map=/boot/map
delay=20
vga=normal
image=/boot/vmlinuz-2.2.16
append=video=matrox:vesa:0x192
^
Here is the console section from make menuconfig in my 2.2.16 kernel:
[*] VGA text console
[*] Video mode selection support
MDA text console (dual-headed) (EXPERIMENTAL)
[*] Support for frame buffer devices (EXPERIMENTAL)
[ ] Permedia2 support (experimental)
Sure, it works fine.
matroxfb: Matrox unknown G400 (AGP) detected
matroxfb: MTRR's turned on
matroxfb: 1152x864x16bpp (virtual: 1152x7280)
matroxfb: framebuffer at 0xE200, mapped to 0xd0005000, size 16777216
Console: switching to colour frame buffer device 144x54
fb0: MATROX VGA frame buffer
25 matches
Mail list logo