Hello,
I don't know how to solve this annoying problem: when viewing pages with
certain characters, such as s or z with carons, they look fine. But when
I print them, those characters are added some space on the right (for at
least another character's width).
Does anyone know how to solve it?
Hello,
this is very disturbing -- when my X server doesn't shut down smoothly,
it leaves some junk behind on the tty it was running on. The result is
that next time I startx, it doesn't use the same tty anymore.
What can I do to get rid of this annoying problem?
Thanks,
andrej
--
On Wed, Aug 25, 2004 at 10:42:06AM +0100, Thomas Adam wrote:
I'm not sure what the problem is here. If you mean you want to surpress the
output that startx produces, do:
startx /dev/null 21
If you'd rather keep it for later:
startx ~/.startx-output.log 21
Or am I not understanding
On Wed, Aug 25, 2004 at 09:08:27AM -0700, Stefan O'Rear wrote:
I would suggest (after X bombs) running:
~ %% sudo lsof /dev/tty11
Yes, I've tried that: nothing!
I can do setterm -reset /dev/tty11 all right, but the problem
doesn't go away. I can even switch to that tty and type some
Hello,
I've been trying to figure out if there's a way to do this -- I'd
like to write a program that would make another program behave as if
a certain key was pressed, e.g. PgD. Thus I could implement
something like moving down in a pager when I press a button on my
mouse or something.
As far
Hello,
it's happened many time to me that I couldn't find a way to forcibly
unmount a CD if the fact that it was broken caused my screen to be
filled with some drive-seek errors or something. Further more, it
seemed impossible if, say, mplayer hung because of that. Getting rid
of the messages is
First of all, why didn't post it to the list? Do you think it's too
OT? But, on the other hand, both your mails were no help and also
misleading. I'd like to elaborate on that.
On Sun, Jul 06, 2003 at 06:51:29AM -0400, Robert August Vincent II wrote:
history is a bash built-in.
Bash runs
Hello,
I'd like to be able to call a script with multiple keys in a way
that it would know how it was called. The main reason I want to do
this is to gain more flexibility and make it a little more elegant:
changing the keymaps so that F2, for example, starts mutt is handy,
but less elegant than
On Fri, Jun 06, 2003 at 12:05:10PM -0400, David Z Maze wrote:
So use command-line arguments, or write a separate script for each
key. They're cheap. :-)
No, that won't go. Suppose you'd want -- as do I -- to press only
the F1 key every time you'd like to check your mail. You'd do it
with
On Wed, Jan 29, 2003 at 09:26:11AM +, [EMAIL PROTECTED] wrote:
I'm running Debian 3.0r1 on my laptop. Whenever I'm working in a bash
terminal or the console certain actions cause the terminal to BEEP through
the PC Speaker. This is annoying the hell out of my missus when she's
trying to
Unfortunately no one has responded to this by now, I too was waiting.
The apt_preferences manpage does mention pinning an origin, but
until now I couldn't succeed.
My less attractive alternative was to add all packages on my CDs into
my preferences file. What I got was an unreasonably long file,
On Fri, Jan 24, 2003 at 07:21:22AM -0600, Ian Melnick wrote:
I was wondering if there was a way to turn off kernel messages from
getting spit out on the active tty. I keep getting this error message;
I have no idea what it means; I don't see any problem (I can still mount
netware drives just
On Thu, Jan 23, 2003 at 09:59:10AM -0500, Lloyd Zusman wrote:
That still doesn't work for me ...
# cat /etc/apt/preferences
Package: mplayer*
Pin: release a=unstable
Pin-Priority: 700
# Package: ruby*
# Pin: release a=unstable
# Pin-Priority: 700
Package: *
Pin:
On Thu, Jan 23, 2003 at 02:09:28PM -0500, Dave W wrote:
I'm using animail and spamassassin on my mail now, with -some- success
on spam, but need help with animail's ~/.animail/filter file. It can be
filled with regexps for mail blocking, but I'm a regexp newbie and can't
find how the heck to
On Thu, Jan 16, 2003 at 04:30:54PM -0700, Scott --sidewalking-- wrote:
I wonder if all (or most) of you are in similar careers and that is
why you are so proficient with compiling and testing and tweaking
all of this stuff. Or is it just a hobby that has gone on for so
long that you have
On Fri, Jan 17, 2003 at 03:03:33PM +0100, Robert Land wrote:
grep '^1[0-9]\{1,\} \{1,\}K' phonelist.txt
or use * and repeat [0-9] and space:
grep '^1[0-9][0-9]* *K' phonelist.txt
=Why, in the first example, has the author
prefaced the char 'K' with the one or more
times multiplier? He
On Sun, Dec 22, 2002 at 03:08:15PM +0100, Michael Naumann wrote:
20.12.2002 22:26:16, andrej hocevar [EMAIL PROTECTED] wrote:
Besides, how do I represent function keys?
I think, they are represented just like cursor keys.
Unfortunatly (to my knowledge, which may well be incomplete
On Wed, Jan 15, 2003 at 04:57:27PM -0500, R Ransbottom wrote:
I am trying to set the console screen size to 25 x 80
on Debian 3.0. I really don't care whether I am using
the framebuffer device or not.
I would like an easy generic solution. One that will work
on various machines.
On Thu, Jan 09, 2003 at 05:12:33PM +, Hugh Saunders wrote:
grub configfile /boot/grub/menu.1st
menu.lst, not first!!! :)
andrej
--
echo ${girl_name} /etc/dumpdates
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
On Tue, Jan 07, 2003 at 10:55:54AM -0600, will trillich wrote:
[...]
slight rewording needed -- black comes back as true BECAUSE IT
DOESN'T MATCH, and that's what you're looking for with !~. it
might seem like a small distinction until you realize how easy
it is to be misled! :)
Right, sorry
On Mon, Jan 06, 2003 at 08:30:08AM +0100, Harald Wopenka wrote:
However: It uses 80x50 textmode. - My aim is the 80x25-textmode. I tried to
find a list of possible parameters for video in the internet, but didn't
find them. Do you know a source?
Use vga= for that. You can try it out with
Hello.
I've been playing around with these two REs in Perl with no
success. Can anyone tell me what's wrong?
This works:
!~ /^(?:red|blue)$/
and will match everything except any of the two fixed strings
red or blue or any combination thereof. black matches,
as does blu, because it's neither red
On Thu, Dec 26, 2002 at 06:26:25PM -0800, Jeff wrote:
andrej hocevar, 2002-Dec-26 08:49 -0200:
in sources.list but apt seems to prefer CDs, no matter what comes
first in the list. How could I change that without removing the
As I said ...
From 'man sources.list':
The source list
Hello.
If there is the same version of a certain package fetchable from
different sources, which one is preferred? Right now, I don't have
my CDs here so I would like apt to use only ftp. I have both entries
in sources.list but apt seems to prefer CDs, no matter what comes
first in the list. How
Hello,
I don't seem to be able to get either filter or sortmail working
with postfix, if that could cause problems. But I think the problem
is in the permissions: both would deliver mail only to files, owned
by nobody:nogroup. Isn't this silly? filter won't even read the
configuration unless I put
Hello,
until recently, I've lived happily with a getmail/postfix
combination for gathering and sending mail. It wasn't until
the thread here about postfix and open relays that I've started
thinking about security issues. Which is good, but it's kind of
giving me a headache. :)
The problems
On Sat, Dec 21, 2002 at 07:49:23PM +0800, Robert Storey wrote:
On bootup, I simply want to boot into a text console. I've turned
off gdm, and that gets rid of the graphical login. Unfortunately,
it seems that I boot into a VESA framebuffer. At the console
there is a penguin on the top left
On Wed, Dec 18, 2002 at 03:27:42PM +0100, Michael Naumann wrote:
If you mean readline in bash, you can add
\M-[A: history-search-backward
to your .inputrc.
A newly started bash should then handle CURSOR-UP the way you like.
But if I add sequences that already have a meaning (like \C-s)
Is there a way to map the, say, F1 key to some command like poff
or whatever else?
And how can I change the behaviour of key bindings like C-s? I've
added something to my .inputrc but it only affects combinations
that have had no function before, like M-s. Can I add function keys
to those
Hello.
Inspired by console-log, I've set up a simple script that
monitors a log from my local server (in another room :) ) that's
mounted over nfs. It gets started from init.
The problem is that when switching to the specified console, I see
only Permission denied messages. So the first time I
Hello.
I've been thinking about this:
dmesg | grep ^Mem gives the following:
Memory: 127264k/131008k available (k kernel code, 3360k
reserved, 345k data, 256k init, 0k highmem)
Now what does it all mean? How much is really available to
me? procinfo says:
Memory: Total
Mem:
Hello,
recently, I was trying to upload a package of mine to a server and
got this message in return:
PGP/GnuPG signature check failed on sumo_1.0-5.2_i386.changes
ERROR: Header line added to ASCII armor: Hash: SHA1
ASCII armor
On Mon, Nov 18, 2002 at 11:25:45PM +0800, Barry Cugley wrote:
I have just had Debian V3 installed as a dual boot system along with a
pre-existing Windows 98 OS. Both operating systems work fine. However,
Debian is unable to do anything with the Windows modem on my system and so I
cannot access
On Sat, Nov 16, 2002 at 11:45:04AM +0530, Sandip P Deshmukh wrote:
could you be more specific here? which file, etc?
As I said in my previous response, you use your bootloader for that,
since it's an option for the kernel. Thus if you use lilo, stick it
to your append= line in /etc/lilo.conf og
On Fri, Nov 15, 2002 at 05:33:47PM +0100, Eduard Bloch wrote:
With LCDs, you can specify vga=317 with the bf2.4 kernel to get 1024x768
resolution for the installation.
I compile my own kernels. But the problem was that it wasn't sharp.
The resolution was no problem, I've tried many different
On Sat, Nov 16, 2002 at 04:46:28PM +0530, Sandip P Deshmukh wrote:
now, where do i get these different fonts and wehre do i put them?
Look for them when you compile your kernel. Using menuconfig,
they're in Console drivers - Frame-buffer support - Select
compiled-in fonts - Sparc console ... or
On Fri, Nov 15, 2002 at 05:07:06PM +0530, Sandip P Deshmukh wrote:
Console: switching to colour frame buffer device 80x30
fb0: VGA16 VGA frame buffer device
what is the advantage of this mode?
By that you probably mean the advantage of using frame buffers in
general, right? Well, I have the
Hello,
recently, someone's gave me an older internal USR V.90 modem,
supposed to work at 56k. However, all I got were speeds at about
33k. That was when I noticed the modem uses some X2 technology.
Can I make such a modem useful? I've read some sites saying it
depends on the ISP -- so does it
On Wed, Nov 13, 2002 at 02:17:48PM +, Doug MacFarlane wrote:
Hopefully, you can get a flash or firmware update to v.90.
Thanks to all of you, I did it!
I've found a page with a link to sume Russian's guy flasher for my
modem: it's V.90 now and working like a charm. Our little network
finally
There are three computers in this LAN: two with Linux and the other
one with Windows. Things got a little complicated when the
Windows-box replaced another Linux-system and I had to buy a second
ethernet card for the central server. Now the configuration is as
follows:
192.168.65.72 [L],
On Tue, Oct 29, 2002 at 10:44:38AM -0800, nate wrote:
you need at least CONFIG_FB compiled into the kernel, chances are
more stuff as well, I don't use framebuffer on my systems but
Well, certainly not that much! :)
Enabling (almost) all options doesn't seem to be a good solution, or
am I
On Tue, Oct 29, 2002 at 11:39:11AM -0700, Dale K Dicks wrote:
I want to be able to use vga=791 as a kernel option on boot. Currently
if I try to do this I get a black screen so I have to use vga=7.
I have an NVidia Geforce 3 card. I tried to cat /dev/fb0 but I get:
cat: /dev/fb0: No
Is it possible to change the colour of the (main) toolbar in galeon?
I've been using it lately a little more than mozilla but I miss the
cool blue theme! Sure, one can get similar buttons, but they're
still on a grey background. Is this a more gnome-specific setting?
Thanks,
andrej
--
On Sun, Sep 08, 2002 at 01:53:11AM +0200, martin f krafft wrote:
How do you detect pppd's failure to connect because of a busy signal
with /etc/ppp/ip-up.d
Take a look, here:
as I'd find out about pppd's status: if it got a busy-signal or
anything else, no information would be
On Tue, Sep 03, 2002 at 03:04:31PM -0400, Jason McCarty wrote:
as I'd find out about pppd's status: if it got a busy-signal or
anything else, no information would be written to the file. Can I do
it in a script?
Yes, indeed you can! I've found the answer. :)
Forgive me for being so
On Wed, Jun 26, 2002 at 09:08:40PM +0800, Patrick Hsieh wrote:
Did you start portmap?
And did you compile it into your kernel?
There's a NFS-HOWTO that helped me back then, I don't remember
everything exactly. But you definitely need it in your kernel plus
the hosts-allow/deny files.
When I
Lately I've been playing a little with sending mail to myself
(great fun, that!:)). I'm using postfix and it works perfectly.
I've found out that if I send mail using sendmail -f foo -F bar
root to rewrite headers there's an effect I didn't plan: Here a
sample header.
sendmail -f [EMAIL
For some reason, I cannot send mail to root directly anymore -- and
I know the cause; I've set up postfix to rewrite the address
[EMAIL PROTECTED] to my real e-mail address, thus [EMAIL PROTECTED] Since
this rewrites *all* occurrence of the above, writing mail root
results in mail to [EMAIL
On Sat, Jun 22, 2002 at 10:35:32AM -0100, andrej hocevar wrote:
Surely there's another way to solving this but I'm new to postfix
and couldn't find a simpler/more advanced solution.
Sorry for that, I've found the answer -- obviously there *was*
another solution! :) I've been doing it wrong
I thought I was clever and added an init script for setting the concole
with fbset. I've figured that fbset -t 13334 144 24 29 3 136 6 yields
the best results. But it affects only the first console -- I have to
run the script every time I log in.
Is there a way to make it permanent for all
On Thu, Jun 20, 2002 at 11:21:59AM +0200, Ulf Rompe wrote:
Just an idea - can't test it at the moment. What happens if you put
something like this into your script?
for i in 1 2 3 4 5 6; do
chvt $i
fbset -t 13334 144 24 29 3 136 6
done
Unfortunatelly, not much. I get bounced
On Thu, Jun 20, 2002 at 11:35:13AM +0200, Karoly VEGH wrote:
#!/bin/sh
echo /dev/tty2
echo /dev/tty3
echo /dev/tty4
echo /dev/tty5
echo /dev/tty6
fbset -a 640x480-100
echo's u need, cause fbset works only on consoles on which there is
already something...
lanc
Hey, thanks.
This was posted a little while ago here by Vineet but I don't have the
mail anymore. The idea was to add the line append=console=/dev/ttyN to
lilo.conf. I've tried to add it to grub (the right way, I suppose, without
quotes and the append) but the results were a little different: at boot
up there
On Thu, Jun 20, 2002 at 12:17:10PM -0500, Derrick 'dman' Hudson wrote:
You didn't show us your config, that's what 0.5 wink. Clearly you
didn't configure it correctly.
Sorry, it's here. I was sure it must have been something else, but
take a look at it. Here's the relevant section:
#2.4.17
I've just migrated from masqmail to postfix and it's working fine as
far as I can tell, the only exception being local delivery. I can
send mail to myself but not to any other computer on a small home
LAN, consisting of three alltogether.
I obviously can't handle the transports file.
Here's my
I'm losing my temper here -- why did the first prompt work normally
and the second looks fine, yet if I try to type more than one line,
it doesn't start a new one but starts overwriting the very same one
instead!?
andrej
###
NC='\e[0m'
BLUE='\e[1;34m'
On Mon, Jun 10, 2002 at 10:07:28PM -0700, Jeffrey Baker wrote:
I had the strangest problem tonight. There are new versions of many
GNOME 2 packages, but apt-get does not offer to upgrade them. For
Maybe you have a preferences file lying around in your /etc/apt
directory?
--
echo
On Thu, Jun 13, 2002 at 10:30:01AM +0800, Willy S wrote:
What happen if I decide to use my CDROM again, that means the apt source-list
will be
replaced with CDROM? I mean, what happen to the program that I have in
You can have as many sources listed as you like -- they will be
added, not
On Tue, Jun 11, 2002 at 11:27:56AM +0200, Francois Chenais wrote:
Is it possible to update this raw file with the new netinstall
package without downloading everything ?
Yes, in fact it is. Using jigdo-lite, you just pretend to be
downloading the image from scratch. This way, you'll
Hello,
suddenly -- after a kernel upgrade, it's 2.4.18 with atyfb now -- ps
stopped working. This is the output:
Signal 7 caught by ps (procps version 2.0.7).
Please send bug reports to [EMAIL PROTECTED]
But top still works. What's wrong here?
andrej
--
echo ${girl_name} /etc/dumpdates
--
Hello,
I'm using vesafb and have just noticed that pressing Alt-UpArrow
doesn't echo the usual Keyboard Request--edit /etc/inittab ... but
instead behaves as if there were no Alt key pressed. Obviously
there's a link between (vesa)fb and this problem. What do I do about
it? I run a 2.4.16 kernel
On Wed, Jun 05, 2002 at 01:12:34PM +0200, jfcarvajal wrote:
I have a problem when trying to download a woody iso image with jigdo-easy.
It always says oops! some file missed. First I followed the readme
intructions but i had always the same message.
I don't know about jigdo-easy (I assume
This is the error dvifb gives me. Here's what fbset says:
mode 1024x768-76
# D: 78.653 MHz, H: 59.949 kHz, V: 75.694 Hz
geometry 1024 768 1024 4096 8
timings 12714 128 32 16 4 128 4
rgba 6/0,6/0,6/0,0/0
endmode
What does it mean? If I try to change it, the console gets messed
up,
Hello,
recently I've switched to framebuffers in order to get good results
with my new Sony lcd monitor -- and almost everything is fine! I'm
using the vesa framebuffer with an ati all-in-wonder card.
And here is the first problem: when booting a kernel with aty128fb,
I get a blank screen -- but
Some days ago I've apt-get upgraded my system and saved all the
downloaded files, ie packages, that were to be upgraded. I saved
them in order to give them to a friend with a slow connection -- so,
I thought, he can upgrade the packages we have in common.
Somehow, we were puzzled: what does one
On Mon, May 13, 2002 at 11:42:51PM -0500, [EMAIL PROTECTED] wrote:
The image goes in /boot/grub and is a .xpm.gz file.
I didn't know GRUB supported a graphical menu -- if it really does,
how do I enable it?
andrej
--
echo ${girl_name} /etc/dumpdates
--
To UNSUBSCRIBE, email to [EMAIL
On Sun, May 12, 2002 at 04:55:49PM -0700, Brian Schramm wrote:
trouble getting my email. So much so that I have set
up the family on yahoo. I decided that I need to get
Haven't I heard the rumours yahoo won't support POP3 access anymore?
A friend of mine migrated from yahoo mail to something
On Sun, May 12, 2002 at 01:12:52PM +0200, Bj?rn Lindstr?m wrote:
Has anyone got the printer HP DeskJet 610C working in Debian?
It is not listed by magicfilterconfig, so I have tried some
other DeskJet filters, but none of them work.
Yes, I have one, works well with the dj690c filter.
On Sun, May 12, 2002 at 08:15:16PM +0200, Mario Vukelic wrote:
You could try to use CUPS
Could someone tell me why use CUPS instead of lpr/lprng?
Based on my experience one can configure and adjust some programs
more easily than others -- so you use those you can figure out,
right? Unless of
On Mon, May 06, 2002 at 09:54:30AM -0500, Dave Sherohman wrote:
That's all very nice, but, as I read it, that allows you to specify
that 'font 3 = Helvetica Runic 72' or whatever, but what I (and, I
suspect, the OP) am looking for is a way (.Xresources would work for
me, but I suspect the OP
Hello,
how do I force some windows (e.g. wmMoonClock and an xterm) to always
open without a frame in sawfish? Or, maybe, open them without a
frame only the first time?
The best would be if there were a way to do it with some option in
my .xsession, like xterm --no-frame. :)
andrej
--
echo
Can I start xterm in unreadable mode by default or with a certain
option? I mean unreadable as when chosen with ctrl+right click
Unreadable.
andrej
--
echo ${girl_name} /etc/dumpdates
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
On Sun, May 05, 2002 at 03:29:45AM -0700, Paul 'Baloo' Johnson wrote:
sure. But it got me interested: Why is this desirable behaviour?
Because you get a tiny window, approximately 3 cm long, literally
unreadable. But removing any frames the wm normally applies, you get
virtually a black square
On Fri, May 03, 2002 at 10:09:51PM +0200, Eduard Bloch wrote:
Errr, kernel-pppoe and pppoe (aka rp-pppoe) are completely different
implementations. You do not need kernel 2.4.x for Debian's pppoe.
Thank you, that's what I wanted to know. I suspected it.
--
echo ${girl_name}
On Wed, May 01, 2002 at 06:49:56PM -0700, Bob Nielsen wrote:
pppoe. I don't think a 2.4 kernel is required (although it is a good
idea in any case).
Unfortunately I'm not at my friend's computer right now, but I'd
like to prepare a little for the next seance -- the last time, of
course, I
Hello,
I'm helping a friend configure his first Debian/Linux box. He's got adsl
access to the internet but I don't really know what it is -- if I'm not
mistaken, he needs kernel 2.4 with pppoe support and the pppoe programs
(pppoe, pppoeconf, ...). Is there basically anything else?
Thank you,
Hello,
I don't really understand the jigdo method yet. In fact, I know nothing
about it -- what I'd like to know is about its resume-capabilities. I've
started downloading but in the morning my brother will want to boot
windows and this connection's not that fast.
So how will I be able to resume
Hello,
recently mozilla suggested (or rather, a page requested) that I
download and install a plugin (jre131_02.xpi for some java). So a
page opened and asked me what I wanted to do -- after clicking on
install or something, I checked for the file's size with lftp --
approximately 15M, so I
Hello,
suddenly, all my consoles went blank after trying to open a file
with bmv (this is not normal behaviour!) but I could still enter X.
Since I wasn't using screen at that time, would there be a way of
continuing a process in X? Or sending a command to it; whatever,
just to avoid going through
Hello -- I'm having trouble unmounting a drive. In order to do some
administrative work on a newly set up server on a little local
network, I had to install some programs from a cd. Since the server
doesn't have a cd drive I mounted the cd onto my own computer and
then mounted the /cdrom directory
On Wed, Mar 27, 2002 at 09:37:11AM -0600, dman wrote:
| echo $(girl_name) /etc/dumpdates
Two problems here (I think) :
'' will overwrite the existing file, use '' instead
$(...) executes the command '...' in a subshell; don't you mean
${...}?
(:--- A cynical note follows
Can I have more entries in my /etc/printcap for one printer? I
wanted to be able to chose which filter to use for a certain job --
so I simply added one more entry with a different spool directory
and a different magicfilter. Unfortunately, it didn't work; is it
only because I've overlooked a
On Tue, Mar 26, 2002 at 10:00:59PM +1030, David Purton wrote:
You could run a pop3 server on your main box and then use whatever
mail client to get mail that way
We run this sort of setup at work - with exim and cucipop. Our various
windoze boxes then just use the linux box as an smtp server
Please, I'm migrating from masqmail to exim and need some help. My
computer is on a small local network of three (bibla, antea and
liz-christina; the first one is my own) and so I want to be able to
send mail to the other two (193.1.1.1, 193.1.1.2 -- If I understand
it correctly, I want to deliver
On Wed, Mar 20, 2002 at 11:43:28AM +, Marcelo Leal wrote:
ok!!!
the ls i fix it! was a alias to --color option...
but now, the question is: why my Shift+PageUP and PageDOWN don't work???
thanks again
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe.
Could anyone tell me which font does have the outline shape
available for use in latex and where to find it? Please, I need it
quickly. The manual (info latex) only says this much:
_
`\fontseries{series}'
Select font series. Valid series include:
In file file, each section (paragraph?) begins exactly with start
and ends exactly with end. How do I print only those sections that
include the string string?
Thanks,
andrej
--
echo $(girl_name) /etc/dumpdates
Hello,
can someone please tell me how to instruct sed to make an empty line
before a certain pattern? For me, the same would be to make a new
line every N lines.
Thank you.
e.g.
NEWLINE
Package: foo
Pin: bar
NEWLINE
Package: ...
etc ...
Quite self-explanatory -- how to make a string of space-separated
words act like a single variable, e.g. first argument being the
recipient and the second the message or similar?
Thank you,
andrej
?
Even if it was a mistake -- is there no other way then quoting? A
quick look at some manuals gave me the impression that this problem
might not be just a silly mistake of mine, can it?
On Wed, Jan 23, 2002 at 03:58:04PM -0600, Colin Watson wrote:
On Wed, Jan 23, 2002 at 10:49:54PM -0100, andrej
Hello.
Lately I've added some cds (woody from linuxiso.org) to my
sources.list. I'm running woody installed from the net; the ftp
sources are also in that file. Since quite a few packages I wanted
to install were grabbed off the net, I assume that those weren't on
my cds -- following some previous
be found.
David
On Fri, 18 Jan 2002, andrej hocevar wrote:
Hello!
I updated grub to 0.9 and it totally amazes me! So many new commands,
great! I've also found a document that describes my situation in
detail.
The solution is to tell grub the first partition be hidden
I've seen some LaTeX discussions here, so just a quick question:
how do I tell LaTeX that a box should have the width of a certain
word? (Precisely, I mean a real box; a rectangle of given
dimensions.)
Thank you,
andrej
1)
I have to install windows on my computer and I don't want to change
more than is really needed to do so (especially concerning my disk
organisation). But the problem is that windows want to be installed
only on the first partition of the first disk which I don't want to
give away. Here comes
Hello!
I updated grub to 0.9 and it totally amazes me! So many new commands,
great! I've also found a document that describes my situation in
detail.
The solution is to tell grub the first partition be hidden and then
boot from a windows floppy. What simplicity.
I haven't tried it out yet! :)
Hello.
Something strange has happened to my file systems: I've resized a
partition (ext2) with parted, installed windows on another. On my
other disk I have woody which I mostly use. But now parted says
/dev/hda1 is ext2, whereas fdisk says it's amoeba. What's wrong?! I
can't boot potato anymore!
Hello,
how do I change the cursor style in the console, eg. like an
underscope vs. a solid block?
Thanks,
andrej
On Mon, Jan 07, 2002 at 11:23:32PM +1100, Adam F. Bogacki wrote:
Hi,
I recently installed kernel 2.4.14 on hdb, fixed up a minor LILO
problem -
and for a while it worked. I was impressed with the boot speed and the
number of
drivers...
Yesterday, however, when I tried to boot
hocevar ([EMAIL PROTECTED])
wrote:
On Tue, Oct 16, 2001 at 08:01:12PM -0700, Karsten M. Self wrote:
on Tue, Oct 16, 2001 at 02:19:35PM +, andrej hocevar ([EMAIL
PROTECTED]) wrote:
lately i've inherited my brother's rockwell modem, which is a hsf,
meaning, as far as i know
On Thu, Oct 18, 2001 at 09:12:07AM -0500, Mullins, Ron wrote:
Andrej Hocevar wrote:
did you deliberately insult me with your self-boasting remarks or
was it just me reacting prickly? to me it seems that my question
It would seem just a little of both. ;) Karsten is often brusque
1 - 100 of 113 matches
Mail list logo
