have you inserted usb disk with firmware during installation?

installer seems very buggy bullseye installer can't find firmware after i insert usb disk after lots of frustration and effort, i realize i shall copy firmware to sda1, which use vfat FS, then installer can get firmware without prompting me.

Re: hard disk installation method fails

i am sorry link in my last mail may not work outside china

Re: hard disk installation method fails

Thank David Wright very much! i think error msg i report is precise, i use cell phone to record screen, https://pan.baidu.com/s/1a5ADqn1aXo5XmwcDSjVezQ?pwd=1234 this url is valid for 7 days, i am sorry picture isn't very clear. installer search disk for iso file, can't find suitable one, and

Re: hard disk installation method fails

On 2/18/23 11:12, Charles Curley wrote: That wouldn't help. My method pulls the kernel and initrd from the iso itself. I got the same error you did. I used the weekly build, so I shall wait until the next build and see if that works. Really? i am afraid vmlinuz and initrd pair in iso file

Re: hard disk installation method fails

On 2/17/23 22:29, Brian wrote: There isn't much you can do about this. It is usually a temporary issue thats happens after Linux kernel updates. The installer is now out of step. It gets automatically fixed after some time. Thanks! i've thought updating iso image and hard disk installer are

Re: hard disk installation method fails

On 2/16/23 22:10, Charles Curley wrote: You shouldn't need separate vmlinuz and initrd.gz files. You should be able to boot directly to the iso image. Depending on how talented your computer's firmware is, you may have to copy the iso image to sdb, not sdb1. E.g.: dd if=.iso of=/dev/sdX What

hard disk installation method fails

this is quite unbelievable, it's most widely-used platform: amd64 installer says "No kernel modules found", probably due to kernel mismatch debian-11.6.0-amd64-netinst.iso is at sdb1, vfat partition, i've checked it with sha256sum vmlinuz and initrd.gz are copied from:

Re: failed to load rtl_bt/rtl8761b_fw.bin

Thank David! you are right, i get firmware for bookworm, extract it with dpkg-deb, copy it to /lib/firmware/rtl_bt, now bluetooth works in bullseye

failed to load rtl_bt/rtl8761b_fw.bin

i have usb wireless dongle, it uses rtl8761b chip, it works in opensuse but bullseye complains though i have installed non-free firmware-realtek: [   16.123855] bluetooth hci0: firmware: failed to load rtl_bt/rtl8761b_fw.bin (-2)

bullseye installer can't load non-free firmware from usb stick

but i use hard disk installation method, i put firmware in same place as iso image, installer can locate firmware without prompting me

Re: why rfkill not list my wifi device

On 1/10/23 21:17, Charles Curley wrote: Interesting. Running "modprobe rfkill" wouldn't return anything because the module is already installed. However, I get a slightly different result from the lsmod command: root@jhegaala:~# lsmod | grep rfkill rfkill 32768 7

Re: why rfkill not list my wifi device

actually i want to use rfkill to block or unblock device is it possible to do it with wireless-tools?

Re: why rfkill not list my wifi device

On 1/10/23 18:10, Alexander V. Makartsev wrote: In that case check if "rfkill" kernel module is actually loaded, because it is necessary for rfkill utility to function:     $ lsmod | grep -iE "rfkill" Use "modprobe" utulity to load it:     $ sudo modprobe rfkill It is possible that driver

Re: why rfkill not list my wifi device

On 1/10/23 15:26, Alexander V. Makartsev wrote: For this adapter, according to Wireless Wiki [1], you should use universal driver "rtl8xxxu". See if it was loaded:     $ sudo lsusb -t Check out the logs for relevant messages:     $ sudo grep -iE "rtl|firmware" /var/log/syslog This should

Re: why rfkill not list my wifi device

On 1/10/23 14:51, Leandro Noferini wrote: I think for this adapter you need to use the dkms kernel modules: – Ciao leandro Thank Leandro! dkms has been installed root@debian:~# apt install dkms Reading package lists... Done Building dependency tree

Re: why rfkill not list my wifi device

On 1/10/23 12:25, Charles Curley wrote: What hardware? A suitable lspci list might help. Mine shows: root@jhegaala:~# rfkill ID TYPE DEVICE SOFT HARD 0 bluetooth tpacpi_bluetooth_sw blocked unblocked 3 wlan phy2unblocked unblocked

why rfkill not list my wifi device

according to web page by expert, rfkill without options shall list wireless device, but it shows nothing though my wifi adapter is active in buster

Re: netgear wna3100 not supported by linux?

On 1/9/23 17:51, Mark Fletcher wrote: Looks like you need to use ndiswrapper with the windows drivers to get it to work. Saw that on an Ubuntu forum but what’s good for the gander is often good for the goose… Mark Thank Mark! i've been directed to Ubuntu forum too, it's too

netgear wna3100 not supported by linux?

i've searched Internet, it doesn't seem supported by linux?? too bad

Re: why some memory are missing

On 1/8/23 17:36, hede wrote: I'm pretty sure it can address 2^32 bit aka 4 GB. But within this range there is the PCI address space.  PCI cards are memory mapped. To access memory regions on PCI devices you can simply access main memory. But you cannot access PCI devices AND use full 4 GB

Re: why some memory are missing

On 1/8/23 07:30, Jeremy Hendricks wrote: I imagine it’s a bios limitation and it cannot address the full 4GB even though it’s a 64bit CPU. This was common with the Intel 925/945 chipsets even through they supported Intel 64bit CPUs of the time. Thank Jeremy Hendricks! it seems to me

Re: why some memory are missing

Thank Greg Wooledge! i've tried bullseye for amd64, it doesn't help memtest86+ claims it can test all memory

why some memory are missing

i have hp dx5150, running buster bios shows 4G memory, but in buster, top shows 3282.8M i have independent graphics card, memory isn't shared i think i have tried bullseye for amd, it doesn't show 4G either memtest86+ shows about 3G memory hp guide says "The memory available may be limited