On 12/19/22 03:00, John Scott wrote:
I've not personally used it, but you're probably looking for gcc-arm-none-eabi
Thanks, I'll look into it on the bpi5.
Take care, stay warm and well.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and a
I've not personally used it, but you're probably looking for gcc-arm-none-eabi
signature.asc
Description: This is a digitally signed message part
Greetings all;
Such as a bananapi m5 or alternatively on this i5 system?
Thank you.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must
On 2022-06-04 18:25, gene heskett wrote:
But whats with lightdm?
Better yet, where is the blanker configurer? I don't see any likely
culprits in the applications menu's.
Then I did find it,under power managment. Logical I guess but since
driving a 3d printer can be a several d
Gigs of
> > >> memory.
> > >
> > > 2nd machine I've bullseye'd. Half a T SSD drive, your basic one
> > > pony
> > > show.
> > >
> > > 1. It can't access the 3d printer, but shows it as /dev/ttyACM0 in
> >
x27;d. Half a T SSD drive, your basic one pony
> > show.
> >
> > 1. It can't access the 3d printer, but shows it as /dev/ttyACM0 in
> > dmesg.
> > cura-5.0 isn't too voluable about why. How do I set that up? Worked
> > fine
> > on buster, for older cu
On 2022-06-04 16:13, gene heskett wrote:
Greetings all;
From firmware 11-3 netinstall. On a Dell with an i5 and 16Gigs of
memory.
2nd machine I've bullseye'd. Half a T SSD drive, your basic one pony
show.
1. It can't access the 3d printer, but shows it as /dev/ttyACM0 in
Greetings all;
>From firmware 11-3 netinstall. On a Dell with an i5 and 16Gigs of memory.
2nd machine I've bullseye'd. Half a T SSD drive, your basic one pony
show.
1. It can't access the 3d printer, but shows it as /dev/ttyACM0 in dmesg.
cura-5.0 isn't too voluable
On Fri, 2021-12-24 at 10:41 +1100, David wrote:
> On Thu, 23 Dec 2021 at 00:50, Tixy wrote:
>
> Hi Tixy,
>
> After reading your several musings in this thread regarding
> USB verses serial interfaces for CNC machines (3D printer, etc),
> I thought I'd respond, becaus
On Thursday, December 23, 2021 6:41:32 PM EST David wrote:
> On Thu, 23 Dec 2021 at 00:50, Tixy wrote:
>
> Hi Tixy,
>
> After reading your several musings in this thread regarding
> USB verses serial interfaces for CNC machines (3D printer, etc),
> I thought I'd res
On Thu, 23 Dec 2021 at 00:50, Tixy wrote:
Hi Tixy,
After reading your several musings in this thread regarding
USB verses serial interfaces for CNC machines (3D printer, etc),
I thought I'd respond, because I think they are missing the mark.
> I guess it's possible to use a USB t
On Thursday, December 23, 2021 12:12:43 PM EST gene heskett wrote:
> On Thursday, December 23, 2021 9:07:56 AM EST Tixy wrote:
> > On Thu, 2021-12-23 at 13:22 +, Curt wrote:
> > > On 2021-12-22, Tixy wrote:
> > > > On Wed, 2021-12-22 at 04:36 -0500, gene heskett wrote:
> > > > [...]
> > > >
>
On Thursday, December 23, 2021 9:20:35 AM EST Curt wrote:
> On 2021-12-23, Tixy wrote:
> > Still none the wiser of what hardware in the printer you would be
> > setting the baud rate of though, but as I'm ignorant of the insides of
> > 3D printers perhaps that's not a surprise.
>
> You set the ba
On Thursday, December 23, 2021 9:07:56 AM EST Tixy wrote:
> On Thu, 2021-12-23 at 13:22 +, Curt wrote:
> > On 2021-12-22, Tixy wrote:
> > > On Wed, 2021-12-22 at 04:36 -0500, gene heskett wrote:
> > > [...]
> > >
> > > > What utility could adjust the baud and endianess of this tty_ACM0?
> > >
On Thursday, December 23, 2021 8:22:03 AM EST Curt wrote:
> On 2021-12-22, Tixy wrote:
> > On Wed, 2021-12-22 at 04:36 -0500, gene heskett wrote:
> > [...]
> >
> >> What utility could adjust the baud and endianess of this tty_ACM0?
> >
> > I can't see how that is relevant, this is your printer's
; looking at the source code [1] translates it into sending control
> message to the USB device of type USB_CDC_REQ_SET_LINE_CODING.
>
> So what does the 3D printer do when it receives this control packet?
> What _hardware_ is it actually going to change the baud rate of?
> I'm assum
not a surprise.
> >
>
> You set the baud rate of the port is how I understand it.
>
> stty -F /dev/ACM0 115200
>
Yes, but that just sends an ioctl request to the Linux driver which
looking at the source code [1] translates it into sending control
message to the USB device
On 2021-12-23, Tixy wrote:
>
> Still none the wiser of what hardware in the printer you would be
> setting the baud rate of though, but as I'm ignorant of the insides of
> 3D printers perhaps that's not a surprise.
>
You set the baud rate of the port is how I understand it.
stty -F /dev/ACM0 11
On Thu, 2021-12-23 at 13:22 +, Curt wrote:
> On 2021-12-22, Tixy wrote:
> > On Wed, 2021-12-22 at 04:36 -0500, gene heskett wrote:
> > [...]
> > > What utility could adjust the baud and endianess of this tty_ACM0?
> >
> > I can't see how that is relevant, this is your printer's USB connectio
On 2021-12-22, Tixy wrote:
> On Wed, 2021-12-22 at 04:36 -0500, gene heskett wrote:
> [...]
>> What utility could adjust the baud and endianess of this tty_ACM0?
>
> I can't see how that is relevant, this is your printer's USB connection
> not some old style asynchronous serial interface like RS2
er hardware and software involved here.
>
> But Debian detects a /dev/ttyACM0 port which suggests to me this 3D
> printer presents itself to the OS as a raw serial com port (tty) albeit
> through an USB connection (ACM), probably from compatibility reasons
> rather than mere aptitudes
suggests to me this 3D
printer presents itself to the OS as a raw serial com port (tty) albeit
through an USB connection (ACM), probably from compatibility reasons
rather than mere aptitudes: it would then be detected as a
/dev/USBsomething?
But that's only what I understand, perhaps wrongly, and
terface like RS232.
> >
>
> Hello Tixy,
>
> Gene is talking about a UDB 3D printer, not about a USB printer, and it
> is common for these devices (as for numerous lab devices) to rely on
> some form of old-style serial communication, even through USB.
Le mercredi 22 décembre 2021 à 11:54 +, Tixy a écrit :
>
> I can't see how that is relevant, this is your printer's USB
> connection
> not some old style asynchronous serial interface like RS232.
>
Hello Tixy,
Gene is talking about a UDB 3D printer, not about
this tty_ACM0?
>
> [...]
>
> Disclaimer: I have never used a 3D printer, and my knowledge of com
> port setup is limited to dial-in modems as a user, back in the day...
>
> I would imagine that there is a way in Cura to add and setup a new
> printer with a particular co
On Wed, 2021-12-22 at 04:36 -0500, gene heskett wrote:
[...]
> What utility could adjust the baud and endianess of this tty_ACM0?
I can't see how that is relevant, this is your printer's USB connection
not some old style asynchronous serial interface like RS232.
--
Tixy
Le mercredi 22 décembre 2021 à 04:36 -0500, gene heskett a écrit :
[...]
> But cura isn't finding this
> biqu bx.
>
> What utility could adjust the baud and endianess of this tty_ACM0?
[...]
Disclaimer: I have never used a 3D printer, and my knowledge of com
port setup i
On Wednesday, December 22, 2021 4:13:18 AM EST didier gaumet wrote:
> Hello Gene,
>
> If I am not mistaken, using a USB cable between your computer and your
> 3D printer, it is being viewed by teh OS (Debian) as a mere serial
> port.
> This is Cura (or another software) that s
Hello Gene,
If I am not mistaken, using a USB cable between your computer and your
3D printer, it is being viewed by teh OS (Debian) as a mere serial
port.
This is Cura (or another software) that sends appropriate G-code to
this particular 3D printer
Greetings all;
I seem to be having occasional difficulty with microsd cards as sneaker-net
between cura and a biqu bx printer.
So I plugged in an older usb2 boosted extension cable with a 6" micro-usb plug
adapter plugged in between that cable and the teeny usb socket on the front of
t
Curt wrote:
> A self-replicating 3D printer?
> That's in the cards, isn't it?
> Or maybe it isn't. The economic model may be faulty; I dunno.
That is the goal of the movement.
--
John Hasler
jhas...@newsguy.com
Elmwood, WI USA
--
To UNSUBSCRIBE, e
On Mon, Nov 04, 2013 at 07:09:02PM +, Curt wrote:
> On 2013-11-04, Jerry Stuckle wrote:
> >
> > I'm waiting for a 3D printer that builds itself :)
> >
>
> A self-replicating 3D printer?
>
> That's in the cards, isn't it?
>
> Or mayb
On 2013-11-04, Jerry Stuckle wrote:
>
> I'm waiting for a 3D printer that builds itself :)
>
A self-replicating 3D printer?
That's in the cards, isn't it?
Or maybe it isn't. The economic model may be faulty; I dunno.
--
To UNSUBSCRIBE, email to debian-user-r
rles. I'm not a hit man. :) Actually, I don't like guns
that much. If humanity wants to kill each other, go for it. I'll just
enjoy my lonely ride with art, programming, music, poetry, science,
etc., the best I can! Cheers!
I'm waiting for a 3D printer that
On 11/04/2013 11:31 AM Beco wrote:
On 4 November 2013 10:24, ken wrote:
On 11/03/2013 08:57 AM Mirco Piccin wrote:
Hi
I would like to start a topic on 3d printers. Does anyone here have
experience in using such printers with debian/linux?
Our local public library bought a couple of these
27;s a serial device.
Anyway:
http://arduino.cc/en/Main/Software (you need the Arduino IDE to update
firmware on your 3d printer, download it, it's opensource)
and
http://playground.arduino.cc/Learning/Linux
Regards
Mirco
--
To UNSUBSCRIBE, email to debian-user-requ...@lists
On 4 November 2013 10:24, ken wrote:
> On 11/03/2013 08:57 AM Mirco Piccin wrote:
>>
>> Hi
>>
>>> I would like to start a topic on 3d printers. Does anyone here have
>>> experience in using such printers with debian/linux?
>
>
> Our local public library bought a couple of these. They give classes
> Chris Bannister via lists.debian.org
> 11:18 (1 hour ago)
> to debian-user
> On Sun, Nov 03, 2013 at 09:21:58AM -0500, Celejar wrote:
> > On Sun, 3 Nov 2013 03:59:37 -0200
> > Beco wrote:
> >
> > > Hi guys,
> > >
> > > This is an open thread, if that is allowed.
> >
> > What's an o
On Sun, Nov 03, 2013 at 09:21:58AM -0500, Celejar wrote:
> On Sun, 3 Nov 2013 03:59:37 -0200
> Beco wrote:
>
> > Hi guys,
> >
> > This is an open thread, if that is allowed.
>
> What's an open thread?
At a guess, opposite to a "closed thread" IOW anyone can contribute,
although the terms don't
On 11/03/2013 08:57 AM Mirco Piccin wrote:
Hi
I would like to start a topic on 3d printers. Does anyone here have
experience in using such printers with debian/linux?
Our local public library bought a couple of these. They give classes on
them. And if you want something printed, you email
On Sun, 03 Nov 2013 07:10:01 +0100
Beco wrote:
> Hi guys,
>
> This is an open thread, if that is allowed.
>
> I would like to start a topic on 3d printers. Does anyone here have
> experience in using such printers with debian/linux?
>
> What brand would you recommend?
>
> How about kits?
>
>
all the pieces are easly available on a diy shop or on ebay :)
There are also a lot of new online stores that sell specifically 3d
printer parts (electronics, extruders, bearings, pulleys, rods and so
on).
Regards
M
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subje
n the subject.
An open thread, as I stated, was something like curt defined. It is a
valid topic, it's related to Debian and printer usage (topics that are
not off-topic), but there is not a single problem to solve.
There is not a OP who has a specific question and want a specific
solution.
On 3 November 2013 10:57, Mirco Piccin wrote:
> Hi
>
>> I would like to start a topic on 3d printers. Does anyone here have
>> experience in using such printers with debian/linux?
>
> here i am :)
>
>> What brand would you recommend?
>> How about kits?
On 2013-11-03, Patrick Wiseman wrote:
> On Sun, Nov 3, 2013 at 10:36 AM, Lisi Reisz wrote:
>> On Sunday 03 November 2013 14:21:58 Celejar wrote:
>>> On Sun, 3 Nov 2013 03:59:37 -0200
>>>
>>> Beco wrote:
>>> > Hi guys,
>>> >
>>> > This is an open thread, if that is allowed.
>>>
>>> What's an open
On Sun, Nov 3, 2013 at 10:36 AM, Lisi Reisz wrote:
> On Sunday 03 November 2013 14:21:58 Celejar wrote:
>> On Sun, 3 Nov 2013 03:59:37 -0200
>>
>> Beco wrote:
>> > Hi guys,
>> >
>> > This is an open thread, if that is allowed.
>>
>> What's an open thread?
>
> +1
Off topic?
Patrick
--
To UNSU
On Sunday 03 November 2013 14:21:58 Celejar wrote:
> On Sun, 3 Nov 2013 03:59:37 -0200
>
> Beco wrote:
> > Hi guys,
> >
> > This is an open thread, if that is allowed.
>
> What's an open thread?
+1
Lisi
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsub
On Sun, 3 Nov 2013 03:59:37 -0200
Beco wrote:
> Hi guys,
>
> This is an open thread, if that is allowed.
What's an open thread?
Celejar
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
h
Hi
> I would like to start a topic on 3d printers. Does anyone here have
> experience in using such printers with debian/linux?
here i am :)
> What brand would you recommend?
> How about kits?
i'm using an opensource 3d printer (RepRap project), specifically a Prusa i2.
It
Hi guys,
This is an open thread, if that is allowed.
I would like to start a topic on 3d printers. Does anyone here have
experience in using such printers with debian/linux?
What brand would you recommend?
How about kits?
What software is there available in debian repositories to create 3D
pro
50 matches
Mail list logo
