|
| One other tip that may help, if your bios supports it, asign an irq to
| the nic card maually, mine allows setting irq's for 'legacy/isa?'
| --
| Greg C. Madden
| Debian GNU/Linux 3.0
|
hi greg,
thanks again. my bios is very simple and doesn't have that option. i've
seen that on other
-- snip --
| My guess: Broken NIC. I had one such card that worked, but after I had
| taken it out and putting back a few times, the light would never go on
| again (I guess a was to brute with it). On a working nic the light
| should go on immediately at power on, before any OS is even loaded, so
On Sat, Mar 23, 2002 at 09:05:27AM -0900, Greg C. Madden wrote:
On Fri, 2002-03-22 at 17:14, Jason M. Harvey wrote:
hello,
i have an isa 3com etherlink III. i had another one before, on the same
PC... as long as i specifed irq7 in modconf it worked fine. this one
will not work. i ran
-user@lists.debian.org
Sent: Saturday, March 23, 2002 3:14 AM
Subject: 3c5x9setup adapter failure on isa etherlink 3
has an option to configure a working
| irq.
|
| HTH,
| Arthur
|
| - Original Message -
| From: Jason M. Harvey [EMAIL PROTECTED]
| To: debian-user@lists.debian.org
| Sent: Saturday, March 23, 2002 3:14 AM
| Subject: 3c5x9setup adapter failure on isa etherlink 3
hello,
i have an isa 3com etherlink III. i had another one before, on the same
PC... as long as i specifed irq7 in modconf it worked fine. this one
will not work. i ran the 3c5x9utils package, and it told me it was on
irq5. so, i changed everything i told it to use irq7 to irq5, and it
still
,
| Arthur
|
| - Original Message -
| From: Jason M. Harvey [EMAIL PROTECTED]
| To: debian-user@lists.debian.org
| Sent: Saturday, March 23, 2002 3:14 AM
| Subject: 3c5x9setup adapter failure on isa etherlink 3
|
|
|
|
|
|
hello,
thanks. i'm going to look into that utility now. btw, i did
On Fri, 2002-03-22 at 17:14, Jason M. Harvey wrote:
hello,
i have an isa 3com etherlink III. i had another one before, on the same
PC... as long as i specifed irq7 in modconf it worked fine. this one
will not work. i ran the 3c5x9utils package, and it told me it was on
irq5. so, i changed
On Fri, Mar 22, 2002 at 09:14:56PM -0500, Jason M. Harvey wrote:
hello,
i have an isa 3com etherlink III. i had another one before, on the same
PC... as long as i specifed irq7 in modconf it worked fine. this one
will not work. i ran the 3c5x9utils package, and it told me it was on
irq5.
9 matches
Mail list logo