:debian-user@lists.debian.org
cc:
Subject:Re: Booting 2.6.8 on x686 Sarge without initrd: VFS: Unable to
mount root fs
KokHow Teh wrote:
> Hmmm, no, it doesn't boot yet. Attached is my .config. Another problem
that
> I see when I ran `make-kpkg modules_image` is that
KokHow Teh wrote:
Hmmm, no, it doesn't boot yet. Attached is my .config. Another problem that
I see when I ran `make-kpkg modules_image` is that it doesn't seem to do
anything at all:
debian:/usr/src/kernel-source-2.6.8# make-kpkg modules_image
for module in ; do \
you could just try lspci -vv to see if you can identify the module
required for ide. if not post to the list.
See attached.
Thanks & Regards,
TEH
(See attached file: lspci_output)
AFAIK the ICH5 chipset is supported by the piix ide driver so try
answering 'y' to this and let me know how
>> The default kernel configuration has the EXT2 compiled in, EXT3 and
>> ATA/ATAPI/SCSI drivers compiled as modules. I turned on EXT3 (used as my
>> root fs) so that it is compiled into the kernel and it still doesn't
boot.
>Ok that's a start, did you run make-kpkg clean before recompiling and
> The default kernel configuration has the EXT2 compiled in, EXT3 and
ATA/ATAPI/SCSI drivers compiled as modules. I turned on EXT3 (used as my
root fs) so that it is compiled into the kernel and it still doesn't boot.
Ok that's a start, did you run make-kpkg clean before recompiling and
give
>>>Hi;
>>> I am building 2.6.8 kernel source on my x686 Sarge system wihtout
>>>using initrd. The kernel-patch.2.6.8 only applies to the prebuilt
>
> 2.6.8_2
>
>>>kernel package and not a prestine kernel. So, I am not using initrd for
>
> my
>
>>>2.6.8 kernel build. The system boots up but ca
KokHow Teh wrote:
Hi;
I am building 2.6.8 kernel source on my x686 Sarge system wihtout
using initrd. The kernel-patch.2.6.8 only applies to the prebuilt
2.6.8_2
kernel package and not a prestine kernel. So, I am not using initrd for
my
2.6.8 kernel build. The system boots up but
>> Hi;
>> I am building 2.6.8 kernel source on my x686 Sarge system wihtout
>> using initrd. The kernel-patch.2.6.8 only applies to the prebuilt
2.6.8_2
>> kernel package and not a prestine kernel. So, I am not using initrd for
my
>> 2.6.8 kernel build. The system boots up but cannot mount
KokHow Teh wrote:
Hi;
I am building 2.6.8 kernel source on my x686 Sarge system wihtout
using initrd. The kernel-patch.2.6.8 only applies to the prebuilt 2.6.8_2
kernel package and not a prestine kernel. So, I am not using initrd for my
2.6.8 kernel build. The system boots up but cannot m
Hi;
I am building 2.6.8 kernel source on my x686 Sarge system wihtout
using initrd. The kernel-patch.2.6.8 only applies to the prebuilt 2.6.8_2
kernel package and not a prestine kernel. So, I am not using initrd for my
2.6.8 kernel build. The system boots up but cannot mount teh root fs. What
10 matches
Mail list logo