Hi all,
at the oment, I'm struggling with a server containing a SCSI card
(Adaptec ASC-29320ALP) which is connected to an easyRAID. On the
easyRAID, I've created a big RAID6 array which is divided into two
slices. Unformntunately, I didn't succeed in accessing those devices:
# gdisk /dev/sdb
GPT fdisk (gdisk) version 0.8.5
Problem opening /dev/sdb for reading! Error is 6.
# ls -l /dev/sdb
brw-rw---T 1 root disk 8, 16 Mar 19 10:36 /dev/sdb
Trying to access /dev/sdc gives the same result.
The server is running Wheezy:
# uname -a
Linux HOSTNAME 3.2.0-4-amd64 #1 SMP Debian 3.2.65-1+deb7u2 x86_64 GNU/Linux
"dmesg | grep -i scsi" delivers the followinng output.
(Yes, there is another 3ware SATA RAID controller which works qithout
any problem)
---- cut here ----
[ 1.044596] scsi1 : ahci
[ 1.044709] scsi2 : ahci
[ 1.044777] scsi3 : ahci
[ 1.044844] scsi4 : ahci
[ 1.044911] scsi5 : ahci
[ 1.044977] scsi6 : ahci
[ 1.204030] scsi0 : 3ware 9000 Storage Controller
[ 1.204125] 3w-9xxx: scsi0: Found a 3ware 9000 Storage Controller at
0xdfb00000, IRQ: 16.
[ 1.380538] scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GT20N
CW03 PQ: 0 ANSI: 5
[ 1.389962] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 1.390148] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 1.391757] sr 5:0:0:0: Attached scsi generic sg0 type 5
[ 1.540088] 3w-9xxx: scsi0: Firmware FE9X 4.08.00.006, BIOS BE9X
4.08.00.001, Ports: 2.
[ 1.540513] scsi 0:0:0:0: Direct-Access AMCC 9650SE-2LP DISK
4.08 PQ: 0 ANSI: 5
[ 1.550038] scsi 0:0:0:0: Attached scsi generic sg1 type 0
[ 16.100045] scsi7 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
[ 16.153432] scsi: waiting for bus probes to complete ...
[ 16.357654] scsi 7:0:1:0: Direct-Access easyRAID Q16+ R0.0 PQ:
0 ANSI: 5
[ 16.357663] scsi target7:0:1: asynchronous
[ 16.357666] scsi7:A:1:0: Tagged Queuing enabled. Depth 32
[ 16.357677] scsi target7:0:1: Beginning Domain Validation
[ 16.359235] scsi target7:0:1: wide asynchronous
[ 16.360437] scsi target7:0:1: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI
WRFLOW PCOMP (6.25 ns, offset 127)
[ 16.390568] scsi target7:0:1: Ending Domain Validation
[ 16.391085] scsi 7:0:1:1: Direct-Access easyRAID Q16+ R0.0 PQ:
0 ANSI: 5
[ 16.391091] scsi7:A:1:1: Tagged Queuing enabled. Depth 32
[ 19.730394] sd 7:0:1:0: Attached scsi generic sg2 type 0
[ 19.730928] sd 7:0:1:1: Attached scsi generic sg3 type 0
[ 49.888591] scsi7: At time of recovery, card was not paused
[ 49.888599] scsi7: Dumping Card State at program address 0x9 Mode 0x33
[ 49.888801] scsi7: FIFO0 Free, LONGJMP == 0x826c, SCB 0x3
[ 49.888879] scsi7: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
[ 49.888993] scsi7: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 49.888998] scsi7: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1
[ 49.889002] scsi7: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 49.889023] scsi7: REG0 == 0xffff, SINDEX = 0x104, DINDEX = 0x104
[ 49.889033] scsi7: SCBPTR == 0x3, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff02
[ 49.889119] (scsi7:A:1:1): Device is disconnected, re-queuing SCB
[ 49.889149] scsi7: Recovery code sleeping
[ 50.659580] scsi7: Device reset code sleeping
[ 50.916410] scsi7: Device reset returning 0x2002
[ 51.173180] scsi7: Device reset code sleeping
[ 51.430033] scsi7: Device reset returning 0x2002
[ 95.841119] scsi7: At time of recovery, card was not paused
[ 95.841128] scsi7: Dumping Card State at program address 0x20 Mode 0x22
[ 95.841360] scsi7: FIFO0 Free, LONGJMP == 0x826c, SCB 0x3
[ 95.841446] scsi7: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
[ 95.841570] scsi7: LQISTATE = 0x1, LQOSTATE = 0x1a, OPTIONMODE = 0x52
[ 95.841575] scsi7: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 95.841580] scsi7: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 95.841602] scsi7: REG0 == 0x3, SINDEX = 0x104, DINDEX = 0x104
[ 95.841614] scsi7: SCBPTR == 0xff03, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
[ 95.841691] scsi7:0:1:1: Cmd aborted from QINFIFO
[ 105.841603] scsi7: At time of recovery, card was not paused
[ 105.841612] scsi7: Dumping Card State at program address 0x0 Mode 0x22
[ 105.841833] scsi7: FIFO0 Free, LONGJMP == 0x826c, SCB 0x3
[ 105.841920] scsi7: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
[ 105.842043] scsi7: LQISTATE = 0x1, LQOSTATE = 0x1a, OPTIONMODE = 0x52
[ 105.842048] scsi7: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 105.842053] scsi7: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 105.842076] scsi7: REG0 == 0x3, SINDEX = 0x104, DINDEX = 0x104
[ 105.842087] scsi7: SCBPTR == 0xff03, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
[ 105.842148] scsi7:0:1:1: Cmd aborted from QINFIFO
[ 105.842190] scsi7: Device reset code sleeping
[ 110.840016] scsi7: Device reset timer expired (active 1)
[ 110.840020] scsi7: Device reset returning 0x2003
---- cut here ----
"At time of recovery, card was not paused" seems a little bit odd for
me, but I couldn't find anything helpful yet.
Grepping dmesg's output for "sd*" delivers the following (again;
/dev/sda comes from the 3ware controller):
---- cut here ----
[ 1.551995] sd 0:0:0:0: [sda] 488259584 512-byte logical blocks: (249
GB/232 GiB)
[ 1.552511] sd 0:0:0:0: [sda] Write Protect is off
[ 1.552516] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 1.552868] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.584402] sda: sda1 sda2 sda3
[ 1.585661] sd 0:0:0:0: [sda] Attached SCSI disk
[ 19.730394] sd 7:0:1:0: Attached scsi generic sg2 type 0
[ 19.730599] sd 7:0:1:0: [sdb] 1218850816 2048-byte logical blocks:
(2.49 TB/2.26 TiB)
[ 19.730928] sd 7:0:1:1: Attached scsi generic sg3 type 0
[ 19.731075] sd 7:0:1:0: [sdb] Write Protect is off
[ 19.731079] sd 7:0:1:0: [sdb] Mode Sense: bf 00 00 08
[ 49.888046] sd 7:0:1:1: Attempting to queue an ABORT message:CDB: 0x0
0x0 0x0 0x0 0x0 0x0
[ 50.145959] sd 7:0:1:0: Attempting to queue an ABORT message:CDB:
0x1a 0x0 0x8 0x0 0x20 0x0
[ 50.145964] sd 7:0:1:0: Command not found
[ 50.659573] sd 7:0:1:0: Attempting to queue a TARGET RESET
message:CDB: 0x1a 0x0 0x8 0x0 0x20 0x0
[ 51.173174] sd 7:0:1:1: Attempting to queue a TARGET RESET
message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
[ 61.718129] sd 7:0:1:0: Device offlined - not ready after error recovery
[ 61.718153] sd 7:0:1:0: [sdb] No Caching mode page found
[ 61.718247] sd 7:0:1:0: [sdb] Assuming drive cache: write through
[ 61.718532] sd 7:0:1:0: [sdb] Attached SCSI disk
[ 61.720316] sd 7:0:1:1: [sdc] 1218850816 2048-byte logical blocks:
(2.49 TB/2.26 TiB)
[ 61.720789] sd 7:0:1:1: [sdc] Write Protect is off
[ 61.720792] sd 7:0:1:1: [sdc] Mode Sense: bf 00 00 08
[ 61.721129] sd 7:0:1:1: [sdc] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 61.721477] sd 7:0:1:1: [sdc] 1218850816 2048-byte logical blocks:
(2.49 TB/2.26 TiB)
[ 61.737198] sdc: unknown partition table
[ 61.737537] sd 7:0:1:1: [sdc] 1218850816 2048-byte logical blocks:
(2.49 TB/2.26 TiB)
[ 61.738321] sd 7:0:1:1: [sdc] Attached SCSI disk
[ 62.354994] EXT4-fs (sda3): mounted filesystem with ordered data
mode. Opts: (null)
[ 95.840062] sd 7:0:1:1: [sdc] Attempting to queue an ABORT
message:CDB: 0x28 0x0 0x0 0x0 0x0 0x44 0x0 0x0 0x2 0x0
[ 105.840017] sd 7:0:1:1: [sdc] Attempting to queue an ABORT
message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
[ 105.842181] sd 7:0:1:1: [sdc] Attempting to queue a TARGET RESET
message:CDB: 0x28 0x0 0x0 0x0 0x0 0x44 0x0 0x0 0x2 0x0
[ 120.848843] sd 7:0:1:1: Device offlined - not ready after error recovery
[ 120.848854] sd 7:0:1:1: [sdc] Unhandled error code
[ 120.848857] sd 7:0:1:1: [sdc] Result: hostbyte=DID_BUS_BUSY
driverbyte=DRIVER_OK
[ 120.848862] sd 7:0:1:1: [sdc] CDB: Read(10): 28 00 00 00 00 44 00 00
02 00
[ 120.848877] end_request: I/O error, dev sdc, sector 272
[ 120.848958] Buffer I/O error on device sdc, logical block 34
[ 120.849063] sd 7:0:1:1: rejecting I/O to offline device
[ 120.849183] sd 7:0:1:1: rejecting I/O to offline device
[ 120.849267] sd 7:0:1:1: rejecting I/O to offline device
[ 120.849358] sd 7:0:1:1: rejecting I/O to offline device
[ 120.849441] sd 7:0:1:1: rejecting I/O to offline device
[ 120.849533] sd 7:0:1:1: rejecting I/O to offline device
[ 122.115533] Adding 3905532k swap on /dev/sda1. Priority:-1 extents:1
across:3905532k
[ 122.143470] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 122.639417] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ 123.478451] EXT4-fs (sda2): mounted filesystem with ordered data
mode. Opts: (null)
[ 124.592190] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
---- cut here ----
Can you help me?
I appreciate your helful answers.
TIA & Kind Regards,
Christian
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: https://lists.debian.org/550ff5d1.6080...@chemie.uni-hamburg.de