I downloaded the Official Debian 3 CD images and built a set of three CDs When I put the Debian 2 Binary CD in my machine and reboot the system boots from the CDROM and loads various drivers. It gets to the point when it tries to load the drivers for my SCSI card (an Adaptec 2940UW) and then it gets some error (timeout I think) and goes into a loop trying this over and over again.
I booted with the Official 1.3 CD and it correctly identified the SCSI card and I was able to install a skeleton system. I then tried to ugrade this 1.3 system to 2.0 and the cd_autoup.sh command has a couple of problems. Firstly on the CD it does not have the eXecute file permission set so it will not run. I copied it to the /tmp directory, ran chmod 555 against it, modified one line which points to the upgrade packages, and ran it. This time it ran but failed with a pacgae missing error. I think that it was something like libg++-2.7 that is missing. Any help with either of these problems will be gratefully received. Regards Ian Ian Stirling Hursley Mid-range and Distributed Systems MP100, IBM UK Labs, Winchester, England, SO21 2JN Tel: Ext: + 44 1962 818146 Int: 248146 -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null
