I need to install Etch (or Etch-and-a-half). I have CD 1. In order to
install a fully working Etch I need more than that.
So, how can I get: a full set of DVDs, a full set of CDs (ouch) or a working
sources list?
I have googled, but can get nothing about installing Etch, now it is
(or Etch-and-a-half). I have CD 1. In order to
> install a fully working Etch I need more than that.
>
> So, how can I get: a full set of DVDs, a full set of CDs (ouch) or a
> working
> sources list?
>
> I have googled, but can get nothing about installing Etch, now it is
>
On Monday 28 March 2011 12:37:41 Roman Khomasuridze wrote:
> On Mon, Mar 28, 2011 at 3:28 PM, Lisi wrote:
> > I need to install Etch (or Etch-and-a-half). I have CD 1. In order to
> > install a fully working Etch I need more than that.
> >
> > So, how can I get: a full set of DVDs, a full set of
you're welcome!
Yeah, but haven't found CD-s archive, just for curiosity, where they might
be?... hmm.
Regards
Roman
On Mon, Mar 28, 2011 at 3:41 PM, Lisi wrote:
> On Monday 28 March 2011 12:37:41 Roman Khomasuridze wrote:
> > On Mon, Mar 28, 2011 at 3:28 PM, Lisi wrote:
> > > I
ahaa, found it:
http://www.debian.org/releases/etch/debian-installer/
On Mon, Mar 28, 2011 at 3:44 PM, Roman Khomasuridze
wrote:
> you're welcome!
> Yeah, but haven't found CD-s archive, just for curiosity, where they might
> be?... hmm.
>
>
> Regards
>
> Roman
>
>
>
> On Mon, Mar 28
Roman wrote:
>you're welcome!
>Yeah, but haven't found CD-s archive, just for curiosity, where they might
>be?... hmm.
http://www.debian.org/CD/faq/#old points at
http://cdimage.debian.org/cdimage/archive/
--
Steve McIntyre, Cambridge, UK.st...@einval.com
There's
On Monday 28 March 2011 12:37:41 Roman Khomasuridze wrote:
> Hi,
>
> here is repository:
>
> deb http://http.us.debian.org/debian etch main contrib non-free
>
> I guess, if you have CD1 this will be enough, just install it and then
> extend with above repository.
That repository appears to be non-
On Lu, 28 mar 11, 15:11:37, Lisi wrote:
> On Monday 28 March 2011 12:37:41 Roman Khomasuridze wrote:
> > Hi,
> >
> > here is repository:
> >
> > deb http://http.us.debian.org/debian etch main contrib non-free
That's not going to work, since etch is archived.
> > I guess, if you have CD1 this will
On 2011-03-28 09:18:31 Andrei Popescu wrote:
>On Lu, 28 mar 11, 15:11:37, Lisi wrote:
>> On Monday 28 March 2011 12:37:41 Roman Khomasuridze wrote:
>> > deb http://http.us.debian.org/debian etch main contrib non-free
>>
>> That repository appears to be non-existent. I couldn't even ping it. :-(
>
My new install of Etch has a few issues.
[1] Even though my keyboard mapping is correct, xterms and rxvt's
don't have the Alt key mapped to Meta, like other apps do
(emacs/xemacs, etc). Checked the keymapping in xkeycaps, and it was
right. How do i fix the way terminals (and console mode, too) rea
Hello, I downloaded netinst for AMD64, I tried to install it and I get
the following message:
Code: 89 d5 81 e5 ff 00 00 00 75 70 48 c1 ea 08 48 8d b3 18 10 00
console shuts up ...
<0>Kernel panic - not syncing: Aiee, killing interrupt handler!
System data:
Processor: DualCore AMD Athlon 64 X2, 21
Dear Debianists,
If I wanted to install etch as a net install, how do I do this? On the
installation web page there is a choice of a weekly snapshot or a daily
built image. The daily built image has a netinstall CD in it.
Is there a netinstall CD for the weekly one?
I have never tried to i
On Mar 8, 8:50 am, [EMAIL PROTECTED] wrote:
> My new install of Etch has a few issues.
>
> [1] Even though my keyboard mapping is correct, xterms and rxvt's
> don't have the Alt key mapped to Meta, like other apps do
> (emacs/xemacs, etc). Checked the keymapping in xkeycaps, and it was
> right. Ho
On Mon, Mar 03, 2008 at 07:50:15PM -0300, Juan Seet wrote:
> Hello, I downloaded netinst for AMD64, I tried to install it and I get
> the following message:
> Code: 89 d5 81 e5 ff 00 00 00 75 70 48 c1 ea 08 48 8d b3 18 10 00
> console shuts up ...
> <0>Kernel panic - not syncing: Aiee, killing inte
The people who lurk on that list are the people who write the
> installer and ensure that it boots. They will either know right away
> what to do, or will tell you what magical incantation to give the kernel
> so that it says something that will help them help you.
>
> Good luck
hat it boots. They will either know right away
> > what to do, or will tell you what magical incantation to give the kernel
> > so that it says something that will help them help you.
> >
> > Good luck.
> >
> > Doug.
>
>
> 0k thanks, I'll sus
Douglas A. Tutty wrote:
>> Any idea? Thanks for your time.
>
> You don't say if this is Sarge, Etch, Lenny, or Sid. Its important.
>
He did (look in the subject line) say that it was on Etch.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [
Juan Seet wrote:
> I can't find the debian-boot list, maybe you meant
> http://lists.debian.org/debian-amd64/ ?
http://lists.debian.org/debian-boot/
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
On Monday 03 March 2008 23:50, Juan Seet wrote:
> Hello, I downloaded netinst for AMD64, I tried to install it and I get
> the following message:
> Code: 89 d5 81 e5 ff 00 00 00 75 70 48 c1 ea 08 48 8d b3 18 10 00
> console shuts up ...
> <0>Kernel panic - not syncing: Aiee, killing interrupt handl
Le Monday 03 March 2008 23:01:23 Douglas A. Tutty,
vous avez écrit :
> On Mon, Mar 03, 2008 at 07:50:15PM -0300, Juan Seet
wrote:
> > Hello, I downloaded netinst for AMD64, I tried to
install it and I get
> > the following message:
> > Code: 89 d5 81 e5 ff 00 00 00 75 70 48 c1 ea 08 48
8d b3 18 10
On Monday 28 March 2011 16:20:18 Boyd Stephen Smith Jr. wrote:
> Note that Etch has a number of known, unpatched security vulnerabilities
> and receives no real support from the Debian project. Moving to Lenny
> should be made a priority; any time spend working with Etch should be (at
> least) mat
Michael Fothergill wrote:
Dear Debianists,
If I wanted to install etch as a net install, how do I do this? On
the installation web page there is a choice of a weekly snapshot or a
daily built image. The daily built image has a netinstall CD in it.
Is there a netinstall CD for the weekly on
On Wed, Dec 13, 2006 at 08:34:00PM +, Michael Fothergill wrote:
> Dear Debianists,
>
> If I wanted to install etch as a net install, how do I do this? On the
> installation web page there is a choice of a weekly snapshot or a daily
> built image. The daily built image has a netinstall CD i
Michael Fothergill wrote:
Dear Debianists,
If I wanted to install etch as a net install, how do I do this? On
the installation web page there is a choice of a weekly snapshot or a
daily built image. The daily built image has a netinstall CD in it.
Is there a netinstall CD for the weekly on
* Chris Lale <[EMAIL PROTECTED]> [061214 04:26]:
> Michael Fothergill wrote:
> >Dear Debianists,
> >
> >If I wanted to install etch as a net install, how do I do this? On
> >the installation web page there is a choice of a weekly snapshot or a
> >daily built image. The daily built image has a n
On Thu, Dec 14, 2006 at 10:15:57AM +, Chris Lale wrote:
> Michael Fothergill wrote:
> >Dear Debianists,
> >
> >If I wanted to install etch as a net install, how do I do this? On
> >the installation web page there is a choice of a weekly snapshot or a
> >daily built image. The daily built im
On Wed, Dec 13, 2006 at 08:34:00PM +, Michael Fothergill
wrote:
> If I wanted to install etch as a net install, how do I do
> this?
Unless you have good reasons to, don't. Time spent waiting
for the full CD-1 to download can be used constructively in
your current OS; time waiting for many of t
Douglas Tutty wrote:
On Thu, Dec 14, 2006 at 10:15:57AM +, Chris Lale wrote:
Michael Fothergill wrote:
Dear Debianists,
If I wanted to install etch as a net install, how do I do this? On
the installation web page there is a choice of a weekly snapshot or a
daily built image. Th
On Fri, Dec 15, 2006 at 10:18:28AM +, Chris Lale wrote:
> Douglas Tutty wrote:
> >On Thu, Dec 14, 2006 at 10:15:57AM +, Chris Lale wrote:
> >>Michael Fothergill wrote:
> >>>If I wanted to install etch as a net install, how do I do this? On
> >>>the installation web page there is a choice
On Fri, Dec 15, 2006 at 09:20:46AM -0500, Douglas Tutty wrote:
> On Fri, Dec 15, 2006 at 10:18:28AM +, Chris Lale wrote:
> > Douglas Tutty wrote:
> > >On Thu, Dec 14, 2006 at 10:15:57AM +, Chris Lale wrote:
> > >>Michael Fothergill wrote:
> > >>>If I wanted to install etch as a net install,
From: Douglas Tutty <[EMAIL PROTECTED]>
To: debian-user@lists.debian.org
Subject: Re: dumb question about installing etch
Date: Fri, 15 Dec 2006 09:20:46 -0500
On Fri, Dec 15, 2006 at 10:18:28AM +, Chris Lale wrote:
> Douglas Tutty wrote:
> >On Thu, Dec 14, 2006 at 1
Hi,
I'm trying to install Debian Etch from floppy and local mirror. It
fails with message:
"The specified Debian archive mirror is either not available, or does
not have a valid Release file on it. Please try a different mirror."
Before I get bashed for this question, I'd like to explain
Hi!
I need to install etch in a notebook which has MS-Vista installed. I
have shrinked the HD (using diskpart from inside Vista) in order to get
room for etch. I am using the etch netinstall cd, and the gui-expert
mode with the following parameters: "acpi=off pnpbios=off noapic
noapm" (I need the
so sorry I sent the reply to the wrong address!it's my first time to use
maillist. i meant, for your laptop, perhaps you should use the up-to-date
kernel, 2.6.22.* version. it might contain the proper drivers for your
hardware.
在2007-08-31,"Marcelo Chiapparini" <[EMAIL PROTECTED]> 写道:
Hi! I n
I have an IBM T20 Laptop and want to put on it Etch
(Kernel 2.6.18-3) with Kde. The installation without GUI
is fine, but Kde will not launch. Error messages in
/var/log/kdm.log indicate that the installer assumed the
laptop has a Synaptics Touchpad and this cannot be detected.
/proc/bus/input/dev
I am trying to install amd64 Etch using the beta 1 release installer
onto an 80Gig USB 2.0 Hard Drive. It goes pretty well, the drive is
picked up at /dev/sda and installs happilly.
Unfortunately it won't boot, and the kernel prints this message:
/sbin/init: 432: cannot open dev/console: No su
Lurker_pas wrote:
> Then I tried archive.debian.org - failed.
I would poke at this more closely. Why is this failing? I have a few
obsolete Etch and even Sarge machines still hitting that archive and
they are validating the archive okay. Seems to me that part should be
working and that problem
> Bob Proulx writes:
[…]
> Another possibility would be Syslinux. The upstream Syslinux site is
> down for me at this moment making it hard for me to check docs but as
> I recall it still supports floppy disk booting and has a process to
> bootstrap a network boot from a floppy disk boo
Hi list,
i'd like to install etch on a the above machine...
but, that machine have only a hd; no floppy-drive or cdrom.
Xubuntu is installed on the hd and boot without any problem.
Is there a way to replace xubuntu by etch ?? and how can i do that ?
Thanks in advance for any suggestion.
mess-mate
Hi all!
I bought a new computer with the following components:
Intel Desktop Board DG965WH
Intel Core 2 Duo 2.40 GHz (6600)
ASUS DVD Recorder/DVD optical drive
etc
I am trying to install Debian Etch but the installer does not recognize the DVD
ROM drive and offers the opportunity to add a driver
Florian Kulzer wrote:
On Fri, Feb 16, 2007 at 15:30:51 +, john gennard wrote:
Florian Kulzer wrote:
[...]
There is one more quick thing that you can try: Go to
http://kmuto.jp/debian/hcl/
[snip]
I've done that now. The 'auto' search didn't work, but I was able
to find in the
Quoting [EMAIL PROTECTED]:
Quoting Marcelo Chiapparini <[EMAIL PROTECTED]>:
Hi!
I need to install etch in a notebook which has MS-Vista installed. I
have shrinked the HD (using diskpart from inside Vista) in order to get
room for etch. I am using the etch netinstall cd, and the gui-expert
mod
> The installed HD is a Western Diginal Scorpio HD (WD800BEVS), using the
> SATA port 1. I wonder if I need any special module to be loaded during
> the installation...
Hi
Maybe, might be a controller problem. So, debian don't see any hard disk.
Try switch to shell and do dmesg command.
Or try dai
On Fri, 2007-08-31 at 12:04 -0300, Marcelo Chiapparini wrote:
> Hi!
>
> I need to install etch in a notebook which has MS-Vista installed. I
> have shrinked the HD (using diskpart from inside Vista) in order to get
> room for etch. I am using the etch netinstall cd, and the gui-expert
> mode with
On Mon, Feb 12, 2007 at 20:24:54 +, john gennard wrote:
> I have an IBM T20 Laptop and want to put on it Etch
> (Kernel 2.6.18-3) with Kde. The installation without GUI
> is fine, but Kde will not launch. Error messages in
> /var/log/kdm.log indicate that the installer assumed the
> laptop has
On Mon, Feb 12, 2007 at 20:24:54 +, john gennard wrote:
> I have an IBM T20 Laptop and want to put on it Etch
> (Kernel 2.6.18-3) with Kde.
I'm writing this from Gnome on my T20---KDE should work
just as well once X is running. It finds my Trackpoint,
which works fine. I've never tried a
Try www.thinkwiki.org
There are great instructions for all flavours of linux on almost all IBM
laptops...
Anton
--
email: [EMAIL PROTECTED]
blog/photos:http://www.strangeparty.com
pgp: [0xB307BAEF] (http://tastycake.net/~anton/anton.asc)
fingerprint: 116A 5F01 1
Florian Kulzer wrote:
On Mon, Feb 12, 2007 at 20:24:54 +, john gennard wrote:
I have an IBM T20 Laptop and want to put on it Etch
(Kernel 2.6.18-3) with Kde. The installation without GUI
is fine, but Kde will not launch. Error messages in
/var/log/kdm.log indicate that the installer assumed
On Tue, Feb 13, 2007 at 14:02:20 +, john gennard wrote:
> Florian Kulzer wrote:
> >On Mon, Feb 12, 2007 at 20:24:54 +, john gennard wrote:
> >
> >>I have an IBM T20 Laptop and want to put on it Etch
> >>(Kernel 2.6.18-3) with Kde. The installation without GUI
> >>is fine, but Kde will not l
Florian Kulzer wrote:
On Tue, Feb 13, 2007 at 14:02:20 +, john gennard wrote:
Florian Kulzer wrote:
On Mon, Feb 12, 2007 at 20:24:54 +, john gennard wrote:
I have an IBM T20 Laptop and want to put on it Etch
(Kernel 2.6.18-3) with Kde. The installation without GUI
is fine, but Kde
On Wed, Feb 14, 2007 at 10:06:12 +, john gennard wrote:
> Florian Kulzer wrote:
[...]
> >What is your graphics card? Please find the relevant lines in the output
> >of "lspci" and post them here (lines mentioning "VGA", "graphic(s)" or
> >"display").
>
> The only reference to VGA etc is:-
>
Florian Kulzer wrote:
On Wed, Feb 14, 2007 at 10:06:12 +, john gennard wrote:
Florian Kulzer wrote:
[...]
What is your graphics card? Please find the relevant lines in the output
of "lspci" and post them here (lines mentioning "VGA", "graphic(s)" or
"display").
The only reference to
On Wed, Feb 14, 2007 at 22:23:53 +, john gennard wrote:
> Florian Kulzer wrote:
[...]
> >Normally when X is started during boot by [xkg]dm and it fails then you
> >are just returned to the command prompt. If your box locks up completely
> >then there might be something really wrong with the g
Florian Kulzer wrote:
On Wed, Feb 14, 2007 at 22:23:53 +, john gennard wrote:
Florian Kulzer wrote:
[...]
Normally when X is started during boot by [xkg]dm and it fails then you
are just returned to the command prompt. If your box locks up completely
then there might be something real
On Thu, Feb 15, 2007 at 09:13:16 +, john gennard wrote:
[...]
> This morning, I reconfigured X using the 'vesa' driver and you
> were perfectly right in your supposition. It now boots directly into
> Gnome (some tweaking will be necessary - the display is not very good
> due no doubt to some
Florian Kulzer wrote:
On Thu, Feb 15, 2007 at 09:13:16 +, john gennard wrote:
[...]
This morning, I reconfigured X using the 'vesa' driver and you
were perfectly right in your supposition. It now boots directly into
Gnome (some tweaking will be necessary - the display is not very good
d
On Wed, Feb 14, 2007 at 10:06:12AM +, john gennard wrote:
> Section "Device"
> Identifier "S3 Inc. 86C270-294 Savage/IX-MV"
> Driver "savage"
> BusID "PCI:1:0:0"
> EndSection
I would try changing the line:
Driver "savage"
to
Driv
On Fri, Feb 16, 2007 at 15:30:51 +, john gennard wrote:
> Florian Kulzer wrote:
[...]
> >There is one more quick thing that you can try: Go to
> >
> >http://kmuto.jp/debian/hcl/
> >
> >and copy/paste your "lspci -n" output into the form. You will get a list
> >of known drivers for your hardw
Florian Kulzer wrote:
> (You need the packages xserver-xorg-video-s3 and
> xserver-xorg-video-s3virge to have them available.
FWIW, the only X server package I've got installed on my T20 is
xserver-xorg-video-savage, which seems to work fine.
--
Best wishes,
Max Hy
bandwidth installing etch and then go to lenny, but
I am talking about the Debian itself)
BTW, what is the difference between having in my
sources.list
etch vs stable
or
lenny vs testing
?
I suppose that using testing I will always stay on testing no matter
when Lenny becomes stable, but
fraz wrote:
I am trying to install amd64 Etch using the beta 1 release installer
onto an 80Gig USB 2.0 Hard Drive. It goes pretty well, the drive is
picked up at /dev/sda and installs happilly.
Unfortunately it won't boot, and the kernel prints this message:
/sbin/init: 432: cannot open dev/c
mess-mate <[EMAIL PROTECTED]> wrote:
> Hi list,
> i'd like to install etch on a the above machine...
> but, that machine have only a hd; no floppy-drive or cdrom.
> Xubuntu is installed on the hd and boot without any problem.
> Is there a way to replace xubuntu by etch ?? and how can i do that ?
>
e xubuntu system and then recreate new partitions and installing
etch into ?
(without the debootstrap of course)
mess-mate
--
You will be awarded some great honor.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
ootstrap should do the trick.
> |
> Do you mean creating a debootstrap and when logging into, deleting
> the xubuntu system and then recreate new partitions and installing
> etch into ?
> (without the debootstrap of course)
Well I don't know your setup, but I know debootstrap was bui
After running the default install from SCSI CDROM on an MVME2700-3361 the
GUI will not start. It fails with "No screens found."
The video card is a Motorola MPMC301 with a Cirrus Logic GD5446 chip. I've
tried two of the MPMC301.
I've used an MVME2604-1361 with the MPMC301 VGA card and a
Peter Robinson wrote:
Hi all!
I bought a new computer with the following components:
Intel Desktop Board DG965WH
Intel Core 2 Duo 2.40 GHz (6600)
ASUS DVD Recorder/DVD optical drive
etc
I am trying to install Debian Etch but the installer does not recognize the DVD
ROM drive and offers the opp
On Sun, Jun 17, 2007 at 06:45:41AM -0500, Hugo Vanwoerkom wrote:
> Peter Robinson wrote:
> >Hi all!
> >
> >I bought a new computer with the following components:
> >Intel Desktop Board DG965WH
> >Intel Core 2 Duo 2.40 GHz (6600)
> >ASUS DVD Recorder/DVD optical drive
> >etc
> >
> >I am trying to in
On Sun, Jun 17, 2007 at 02:17:33PM +, Thias wrote:
> On Sun, Jun 17, 2007 at 06:45:41AM -0500, Hugo Vanwoerkom wrote:
> > Peter Robinson wrote:
> > >Hi all!
> > >
> > >I bought a new computer with the following components:
> > >Intel Desktop Board DG965WH
> > >Intel Core 2 Duo 2.40 GHz (6600)
>
On Sun, Jun 17, 2007 at 04:22:07PM +0200, Peter Robinson wrote:
> On Sun, Jun 17, 2007 at 02:17:33PM +, Thias wrote:
> > On Sun, Jun 17, 2007 at 06:45:41AM -0500, Hugo Vanwoerkom wrote:
> > > Peter Robinson wrote:
> > > >Hi all!
> > > >
> > > >I bought a new computer with the following componen
On Sun, 17 Jun 2007 16:22:07 +0200
[EMAIL PROTECTED] (Peter Robinson) wrote:
> On Sun, Jun 17, 2007 at 02:17:33PM +, Thias wrote:
> > On Sun, Jun 17, 2007 at 06:45:41AM -0500, Hugo Vanwoerkom wrote:
> > > Peter Robinson wrote:
> > > >Hi all!
> > > >
> > > >I bought a new computer with the foll
On Sun, Jun 17, 2007 at 12:51:00PM -0400, Frank McCormick wrote:
> On Sun, 17 Jun 2007 16:22:07 +0200
> [EMAIL PROTECTED] (Peter Robinson) wrote:
>
> > On Sun, Jun 17, 2007 at 02:17:33PM +, Thias wrote:
> > > On Sun, Jun 17, 2007 at 06:45:41AM -0500, Hugo Vanwoerkom wrote:
> > > > Peter Robins
On Sun, 17 Jun 2007 19:46:23 +0200
[EMAIL PROTECTED] (Peter Robinson) wrote:
> > > > > >I bought a new computer with the following components:
> > > > > >Intel Desktop Board DG965WH
> > > > > >Intel Core 2 Duo 2.40 GHz (6600)
> > > > > >ASUS DVD Recorder/DVD optical drive
> > >
> > >
> > > It is
On Sun, Jun 17, 2007 at 03:22:19PM -0400, Frank McCormick wrote:
> On Sun, 17 Jun 2007 19:46:23 +0200
> [EMAIL PROTECTED] (Peter Robinson) wrote:
>
> > > > > > >I bought a new computer with the following components:
> > > > > > >Intel Desktop Board DG965WH
> > > > > > >Intel Core 2 Duo 2.40 GHz (6
On Sun, 17 Jun 2007 22:02:44 +0200
[EMAIL PROTECTED] (Peter Robinson) wrote:
> On Sun, Jun 17, 2007 at 03:22:19PM -0400, Frank McCormick wrote:
> > On Sun, 17 Jun 2007 19:46:23 +0200
> > [EMAIL PROTECTED] (Peter Robinson) wrote:
> >
> > > > > > > >I bought a new computer with the following compon
-- Forwarded message --
From: David Fox <[EMAIL PROTECTED]>
Date: Thu, 13 Dec 2007 06:41:37 -0800
Subject: Re: Installing Etch and upgrading or Lenny directly
To: [EMAIL PROTECTED]
On 12/10/07, Guillermo Garron <[EMAIL PROTECTED]> wrote:
> After almost a year with
On Wed, May 30, 2007 at 10:56:40PM -0500, SHS wrote:
[snipped lamentable failure of x system]
>
>
> Is there a way to get the boot process to skip the IDE probe, the board is
> booting from the SCSI port and hangs for several minutes while trying to
> look at the IDE hardware which I don't thi
On 05/30/07 22:56, SHS wrote:
After running the default install from SCSI CDROM on an MVME2700-3361 the
GUI will not start. It fails with "No screens found."
>
The video card is a Motorola MPMC301 with a Cirrus Logic GD5446 chip. I've
tried two of the MPMC301.
I've used an MVME2604-1361 with
Good day
I have an old-ish laptop with a dodgy CD-device, onto which I want to
install Etch. I am using Etch on my desktop and the laptop is connected
to the same LAN that my desktop is on. Is there anyway that I can
exploit this arrangement to enable me to install onto the laptop?
Thanks fo
Hi all,
How cai I select Kde instead of Gnome during a fresh install?
For now I have to install the base system and then install Kde.
Then I have to swicth the login interface.
Any hint?
Thanks
Mirto
--
__
Mirto Silvio Busico
I don't think the hardware is going to be the issue here. I'm pretty
sure it's a config issue.
I have a Soekris Net5501 box I'm installing Etch on. I'm hooked up to
the box with a null modem cable for the console and it's also hooked up
to my LAN. I'v
On Thu February 15 2007 09:38, andy wrote:
> Good day
>
> I have an old-ish laptop with a dodgy CD-device, onto which I want to
> install Etch. I am using Etch on my desktop and the laptop is connected
> to the same LAN that my desktop is on. Is there anyway that I can
> exploit this arrangement to
On Thu, Feb 15, 2007 at 05:38:28PM +, andy wrote:
> Good day
>
> I have an old-ish laptop with a dodgy CD-device, onto which I want to
> install Etch. I am using Etch on my desktop and the laptop is connected
> to the same LAN that my desktop is on. Is there anyway that I can
> exploit this
andy wrote:
Good day
I have an old-ish laptop with a dodgy CD-device, onto which I want to
install Etch. I am using Etch on my desktop and the laptop is connected
to the same LAN that my desktop is on. Is there anyway that I can
exploit this arrangement to enable me to install onto the laptop
On Thu, 15 Feb 2007 17:38:28 +
andy <[EMAIL PROTECTED]> wrote:
> Good day
>
> I have an old-ish laptop with a dodgy CD-device, onto which I want to
> install Etch. I am using Etch on my desktop and the laptop is
> connected to the same LAN that my desktop is on. Is there anyway that
> I can
On Thu, 15 Feb 2007 17:38:28 +, andy wrote in message
<[EMAIL PROTECTED]>:
> Good day
>
> I have an old-ish laptop with a dodgy CD-device, onto which I want to
> install Etch. I am using Etch on my desktop and the laptop is
> connected to the same LAN that my desktop is on. Is there anyway
Mirto Silvio Busico wrote:
> How cai I select Kde instead of Gnome during a fresh install?
Type "install tasksel/first=kde-desktop" at the installer's boot prompt.
--
see shy jo
signature.asc
Description: Digital signature
On 8/22/06, Joey Hess <[EMAIL PROTECTED]> wrote:
Mirto Silvio Busico wrote:
> How cai I select Kde instead of Gnome during a fresh install?
Type "install tasksel/first=kde-desktop" at the installer's boot prompt.
Hi Joey,
If the user wants to use the GUI frontend it would be ''installgui
tas
Gustavo Franco wrote:
> If the user wants to use the GUI frontend it would be ''installgui
> tasksel/first=kde-desktop', right?
>
> Couldn't we change the options adding 'installdesktop',
> 'installguidesktop', 'installdesktopkde' and 'installguidesktopkde' ?
Sounds like a combinational explosion
On 8/22/06, Joey Hess <[EMAIL PROTECTED]> wrote:
Gustavo Franco wrote:
> If the user wants to use the GUI frontend it would be ''installgui
> tasksel/first=kde-desktop', right?
>
> Couldn't we change the options adding 'installdesktop',
> 'installguidesktop', 'installdesktopkde' and 'installguide
Gustavo Franco wrote:
> When leaving a conference, being asked 'hey, how can i install
> kde/gnome desktop by default?' i would be able to answer 'type
> installdesktop or installdesktopkde and press enter'. This is way more
> user friendly than 'install tasksel/first=gnome-desktop' that a human
>
On 8/22/06, Joey Hess <[EMAIL PROTECTED]> wrote:
Gustavo Franco wrote:
> When leaving a conference, being asked 'hey, how can i install
> kde/gnome desktop by default?' i would be able to answer 'type
> installdesktop or installdesktopkde and press enter'. This is way more
> user friendly than 'i
First of all, thanks to you all.
I've tried "installgui acpi=off tasksel/first=kde-desktop"
The installation starts without complaining, but kde is not installed.
Searching with synaptic, there is no metapackage called kde-desktop.
I mispelled something?
There is any documentation about the boot
On Thursday 09 October 2008, Hal Vaughan wrote:
> I don't think the hardware is going to be the issue here. I'm pretty
> sure it's a config issue.
>
> I have a Soekris Net5501 box I'm installing Etch on. I'm hooked up
> to the box with a null modem cable f
On Thu, Oct 09, 2008 at 07:28:43PM -0400, Hal Vaughan wrote:
> I don't think the hardware is going to be the issue here. I'm pretty
> sure it's a config issue.
>
> I have a Soekris Net5501 box I'm installing Etch on. I'm hooked up to
> the box with a n
On Friday 10 October 2008, Tzafrir Cohen wrote:
> On Thu, Oct 09, 2008 at 07:28:43PM -0400, Hal Vaughan wrote:
> > I don't think the hardware is going to be the issue here. I'm
> > pretty sure it's a config issue.
> >
> > I have a Soekris Net5501 box I
On Friday 10 October 2008, Tzafrir Cohen wrote:
> On Thu, Oct 09, 2008 at 07:28:43PM -0400, Hal Vaughan wrote:
...
> > I thought it might be a baud rate issue. The 5501 starts with
> > 19200 baud, so I altered pxelinux.cfg/default to use the same speed
> > and to specify the right console (before
On Fri, Oct 10, 2008 at 01:06:41AM -0400, Hal Vaughan wrote:
> On Friday 10 October 2008, Tzafrir Cohen wrote:
> > Where is the actual install media?
>
> That's one thing I'm not clear about. Not one article I've found on the
> web that has explained this has said where to put any install media
On Sun, Oct 12, 2008 at 05:12:47AM -0400, Hal Vaughan wrote:
> On Saturday 11 October 2008, Tzafrir Cohen wrote:
> > On Fri, Oct 10, 2008 at 01:06:41AM -0400, Hal Vaughan wrote:
> > > On Friday 10 October 2008, Tzafrir Cohen wrote:
> > > > Where is the actual install media?
> > >
> > > That's one t
On Saturday 11 October 2008, Tzafrir Cohen wrote:
> On Fri, Oct 10, 2008 at 01:06:41AM -0400, Hal Vaughan wrote:
> > On Friday 10 October 2008, Tzafrir Cohen wrote:
> > > Where is the actual install media?
> >
> > That's one thing I'm not clear about. Not one article I've found
> > on the web that
On Sunday 12 October 2008, Tzafrir Cohen wrote:
> On Sun, Oct 12, 2008 at 05:12:47AM -0400, Hal Vaughan wrote:
> > On Saturday 11 October 2008, Tzafrir Cohen wrote:
> > > On Fri, Oct 10, 2008 at 01:06:41AM -0400, Hal Vaughan wrote:
> > > > On Friday 10 October 2008, Tzafrir Cohen wrote:
> > > > > W
1 - 100 of 102 matches
Mail list logo