Isapnp startup script no longer works. The READPORT fails to read the isapnp
port number due to resource conflict.
(READPORT 0x0213)
Only a limited range can be entered here and the one I placed was shown on the
/proc/ioports file. There are two, the one labeled as write is outside the
David Baron put forth on 4/21/2011 3:36 AM:
Isapnp startup script no longer works. The READPORT fails to read the isapnp
port number due to resource conflict.
(READPORT 0x0213)
Only a limited range can be entered here and the one I placed was shown on
the
/proc/ioports file. There are
With new MB, I can no longer access my older, analog phone line modem.
The isapnp startup had an older isapnp.conf file.
I assume one uses pnpdump to make a new one with the correct ISAPNP port. I
found an address 0213 in the /proc/ioports and I seem to get a sensible conf
file using
a isapnp.conf file.
How do I specify io = 0x300 irq = 10 in the new kernel? please
Steve
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
El Lun 22 Oct 2001 14:10, Javier Juez Santamaría escribió:
Agracedería ayuda para inicializar esta tarjeta mediante las
isapnp tools. He probado todas las combinaciones, y no acepta ninguna de
las interrupciones que admite la tarjeta.
Querido JJ:
A lo mejor te vale con cargar algún módulo.
of
FF FF FF FF 003 054 07 AZT300 serial no-1 [checksum of ]
/etc/isapnp.conf:93- fatal-IO range check attempted while device
activated
/etc/isapnp.conf:93- fatal : error occured executing request
'IORESCHECK'
--further action aborted
I tried mucking around with the BIOS (i.e. turning on/off pnp os
of ]
/etc/isapnp.conf:93- fatal-IO range check attempted while device activated
/etc/isapnp.conf:93- fatal : error occured executing request 'IORESCHECK'
--further action aborted
I tried mucking around with the BIOS (i.e. turning on/off pnp os and
resources controlled by auto/manual) to no avail.
Any
no-1 [checksum of ]
/etc/isapnp.conf:93- fatal-IO range check attempted while device activated
/etc/isapnp.conf:93- fatal : error occured executing request 'IORESCHECK'
--further action aborted
I tried mucking around with the BIOS (i.e. turning on/off pnp os and
resources controlled by auto
and during boot-up when my card is being detected.
Board 1 has identity of
FF FF FF FF 003 054 07 AZT300 serial no-1 [checksum of ]
/etc/isapnp.conf:93- fatal-IO range check attempted while device activated
/etc/isapnp.conf:93- fatal : error occured executing request 'IORESCHECK'
--further action
Hey,
I'm trying to get my ethernet NE2000 clone to work in linux. The HOWTO
said to read up about isapnptools, so I started looking at the
README.debian, and it has someone's config file here. Anyways, I can't
make any sense of it. It says:
# EDI0119 Serial No 2368613654 [checksum 13]
# ANSI
On Sun, May 21, 2000 at 22:35, Cameron Matheson wrote:
Hey,
I'm trying to get my ethernet NE2000 clone to work in linux. The HOWTO
said to read up about isapnptools, so I started looking at the
README.debian, and it has someone's config file here. Anyways, I can't
make any sense of it.
, what is the best way to invoke
the /ect/isapnp.conf file on bootup so that the
NIC is recognized ?
In Red Hat, this is invoked by default via
the /etc/rc.d/rc.sysinit script.
I presume I should put in a runlevel 2 -related
rc.d directory. (I'll simply copy it from RH
On Wed, Dec 01, 1999 at 01:26:51PM -0800, Howard Mann wrote:
In Debian, what is the best way to invoke
the /ect/isapnp.conf file on bootup so that the
NIC is recognized ?
Install the isapnptools package. This will automatically setup scripts
in /etc/init.d and symlinks from the proper rc
On Wed, Dec 01, 1999 at 01:26:51PM -0800, Howard Mann wrote:
In Debian, what is the best way to invoke
the /ect/isapnp.conf file on bootup so that the
NIC is recognized ?
In Red Hat, this is invoked by default via
the /etc/rc.d/rc.sysinit script.
Just make sure you install
14 matches
Mail list logo