My problem is that booting from the hard disc gets LI but not LO,
i.e. LILO isn't mounting linux. Two people (many thanks)
suggested I instruct lilo to use linear addressing either by using the
lilo -l option or putting "linear" into /etc/lilo.conf. This sounds very
promising but I think the
> Now booting shows lilo getting through "LI" but then nothing. I
> assume something is going wrong in the loading of linux but I'm not
> sure what's likely to be wrong and how I should deal with it. I found
> one report of something similar in the archives but no answer there.
i'm not sure if
>
> I had to change the SCSI controller on my home Debian machine
> (had to cannibalise the Dawicontrol NCR chip card to use it on
> another machine urgently). I found I couldn't get the same and put
> in an Adaptec 2940U. The Adaptec shows me all the devices on
> the chain correctly. I've
On Fri, Dec 11, 1998 at 01:35:52PM -, Chris Evans wrote:
Hi Chris
[..]
> Now booting shows lilo getting through "LI" but then nothing. I
> assume something is going wrong in the loading of linux but I'm not
> sure what's likely to be wrong and how I should deal with it. I found
> one repor
> Now booting shows lilo getting through "LI" but then nothing. I
> assume something is going wrong in the loading of linux but I'm not
> sure what's likely to be wrong and how I should deal with it. I found
> one report of something similar in the archives but no answer there.
In the lilo ma
I had to change the SCSI controller on my home Debian machine
(had to cannibalise the Dawicontrol NCR chip card to use it on
another machine urgently). I found I couldn't get the same and put
in an Adaptec 2940U. The Adaptec shows me all the devices on
the chain correctly. I've told its bios
6 matches
Mail list logo
