On Lu, 12 oct 20, 21:19:39, Dennis Wicks wrote:
> I have 3 SATA drives on my system. I replaced all my red cables with new
> black cables. The BIOS sees all of them but when linux finishes booting it
> only sees two of them. Do I have to do something to linux so it sees the
> third drive?
>
>
On 2020-10-13 18:01, David Christensen wrote:
Boot the Debian 9 or 10 installer, run the following commands, and post
the console session:
# smartctl -i /dev/sda
My bad -- d-i does not include smartctl(8). What I'm after is make,
model, interface, and firmware version information. It
On 2020-10-13 08:39, Dennis Wicks wrote:
David Christensen wrote on 10/12/20 10:01 PM:
On 2020-10-12 19:19, Dennis Wicks wrote:
I have 3 SATA drives on my system. I replaced all my red cables with
new black cables. The BIOS sees all of them but when linux finishes
booting it only sees two of
Dennis Wicks composed on 2020-10-12 21:19 (UTC-0500):
> I have 3 SATA drives on my system. I replaced all my red
> cables with new black cables. The BIOS sees all of them but
> when linux finishes booting it only sees two of them. Do I
> have to do something to linux so it sees the third
On 2020-10-13 16:39, Dennis Wicks wrote:
David Christensen wrote on 10/12/20 10:01 PM:
On 2020-10-12 19:19, Dennis Wicks wrote:
I have 3 SATA drives on my system. I replaced all my red cables with
new black cables. The BIOS sees all of them but when linux finishes
booting it only sees two of
David Christensen wrote on 10/12/20 10:01 PM:
On 2020-10-12 19:19, Dennis Wicks wrote:
I have 3 SATA drives on my system. I replaced all my red
cables with new black cables. The BIOS sees all of them
but when linux finishes booting it only sees two of them.
Do I have to do something to linux
On 2020-10-12 19:19, Dennis Wicks wrote:
I have 3 SATA drives on my system. I replaced all my red cables with new
black cables. The BIOS sees all of them but when linux finishes booting
it only sees two of them. Do I have to do something to linux so it sees
the third drive?
FYI, I have the
I have 3 SATA drives on my system. I replaced all my red
cables with new black cables. The BIOS sees all of them but
when linux finishes booting it only sees two of them. Do I
have to do something to linux so it sees the third drive?
FYI, I have the system disk in sata-1, the drive on sata2
8 matches
Mail list logo
