Hi,
> The sk98lin driver in the vanilla kernel does not support all cards,
> esp. Yukon2 cards.
>
> You should try the vendor driver:
>
> http://www.syskonnect.com/syskonnect/support/driver/
>
Thank you very much for your help!
The vendor driver works well with kernel 2.6.11 .
So, the next challe
> # ifconfig eth0 up
> eth0: ERROR while getting interface flags: No such device
What does ifconfig -a say?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Am 17.06.2005 um 16:52 schrieb Gebhardt Thomas:
> Any hint what I might have missed? (Yes, I've configured
> PCI Express support within the kernel)
The sk98lin driver in the vanilla kernel does not support all cards,
esp. Yukon2 cards.
You should try the vendor driver:
http://www.syskonnect.com
http://support.intel.com/design/motherbd/cv2/cv2_drive.htm
Intel only seems to have driver support for Red Hat, Suse, and Red
Flag. I had the same problem with the ethernet and sound drivers on my
intel board. I had extra ethernet and sound cards laying around, so I
just disabled the onboard
Hi,
I'm trying to get a Marvell onboard Gigabit chip (Intel mainboard D925XECV2)
working on a freshly installed sarge system (Intel P4)
# lspci -v
...
:04:00.0 Ethernet controller: Marvell Technology Group Ltd.: Unknown
device 4361 (rev 17)
Subsystem: Intel Corp.: Unknown device 3078
5 matches
Mail list logo