* Petre Daniel ([EMAIL PROTECTED]) spake thusly:
>
> Ok,i played a little more and look where i am:
>
> setserial /dev/ttyS2 shows irq 2,port 0x0110 and uart 16450..till now it was
> uart unknown.This is set with:
> setserial /dev/ttyS2 irq 9 port 0x0110 uart 16450
In the other thread you wrote
Ok,i played a little more and look where i
am:
setserial /dev/ttyS2 shows irq 2,port 0x0110 and uart
16450..till now it was uart unknown.This is set with:
setserial /dev/ttyS2 irq 9 port 0x0110 uart
16450
if i start minicom it says initializing modem,then stays
like this 3,4 seconds then
ok.i tried to mess a little with setserial,since
wvdialconf tells me that "perhaps i didn't set it with setserial"
here are my attempts:
setserial /dev/ttyS2 irq 5 port 0x0170 autoconfig
nothing.wvdialconf finds only ttys0 and ttys1
setserial /dev/ttyS2 irq 5 port 0x0110 uart 16450 baud_base
3 matches
Mail list logo