On Sun, Jan 18, 2004 at 06:21:11PM -0500, Carl Fink wrote:
> On Sun, Jan 18, 2004 at 12:38:04PM -0700, Paul E Condon wrote:
>
> > Jan 18 12:30:40 big kernel: usb.c: USB device 14 (vend/prod 0x82d/0x100) is not
> > claimed by any active driver.
> >
> > The device number increments each time I mak
On Sun, Jan 18, 2004 at 12:38:04PM -0700, Paul E Condon wrote:
> Jan 18 12:30:40 big kernel: usb.c: USB device 14 (vend/prod 0x82d/0x100) is not
> claimed by any active driver.
>
> The device number increments each time I make another attempt to hot
> sync. Clearly, I need another driver, but wh
You need usbserial and visor to sync your palm pilot. In the .config file
they're:
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_VISOR=m
ap
--
Andrew J Perrin - http://www.unc.edu/~aperrin
Assistant Professor of Sociology, U of North C
On Sun, Jan 18, 2004 at 02:06:45PM -0500, Andrew Perrin wrote:
> Make sure you have the following in /etc/fstab:
>
> none /proc/bus/usb usbdevfs defaults 0 0
>
> if you add that during a session, do a:
>
> mount -a
>
> as root to mount the USB devices.
>
> ap
>
Thanks. That got usbview
Make sure you have the following in /etc/fstab:
none /proc/bus/usb usbdevfs defaults 0 0
if you add that during a session, do a:
mount -a
as root to mount the USB devices.
ap
--
Andrew J Perrin - http://www.unc.edu/~aper
On Sun, Jan 18, 2004 at 12:02:42PM -0600, Kent West wrote:
> Kent West wrote:
>
> >Paul E Condon wrote:
> >
> >>I am attempting to get working a USB connection from
> >>my Sarge machine to a Handspring Visor. I have never before had USB
> >>working on this machine (never tried
> >>before).
> >
>
Kent West wrote:
Paul E Condon wrote:
I am attempting to get working a USB connection from
my Sarge machine to a Handspring Visor. I have never before had USB
working on this machine (never tried
before).
Also, usbview might be of some value to you.
--
Kent
--
To UNSUBSCRIBE, email to [EMA
Paul E Condon wrote:
I am attempting to get working a USB connection from
my Sarge machine to a Handspring Visor. I have never
before had USB working on this machine (never tried
before). I am heading for using jpilot. I am using
kernel 2.4.22 i686, recently installed. It seems to
have all the ne
I am attempting to get working a USB connection from
my Sarge machine to a Handspring Visor. I have never
before had USB working on this machine (never tried
before). I am heading for using jpilot. I am using
kernel 2.4.22 i686, recently installed. It seems to
have all the necessary USB stuff, but
9 matches
Mail list logo