Am 27.05.2005 um 11:35 schrieb martin schmidt:
> I`ve attached the dmesg output.
The last few lines look very good. It seems like the bttv driver
recognizes the bt chip. It does _not_ recognize the tuner, though,
because it assumes a wrong card type. But you should already be able to
watch TV
Jim MacBaine wrote:
On 5/27/05, martin schmidt <[EMAIL PROTECTED]> wrote:
i'm using a terratec terratv+ card with kernel 2.6.10 and the sarge
distribution.
I own the same card and it used to work without any problems with all
2.4 and 2.6 kernels I ever used. What messages do appear in the
On 5/27/05, Jim MacBaine <[EMAIL PROTECTED]> wrote:
> I own the same card and it used to work without any problems with all
> 2.4 and 2.6 kernels I ever used. What messages do appear in the
> system log, when you load the bttv module?
I just reread your mail, esp your lspci output: Your card has
On 5/27/05, martin schmidt <[EMAIL PROTECTED]> wrote:
> i'm using a terratec terratv+ card with kernel 2.6.10 and the sarge
> distribution.
I own the same card and it used to work without any problems with all
2.4 and 2.6 kernels I ever used. What messages do appear in the
system log, when you l
i'm using a terratec terratv+ card with kernel 2.6.10 and the sarge
distribution.
the following modules are built:
tuner
bttv
video_buf
firmware_class
i2c_algo_bit
v4l2_common
btcx_risc
i2c_core
videodev
rtc
lspci says:
:00:0a.0 Multimedia video controller: Brooktree Corporation Bt878
Vid
5 matches
Mail list logo