Re: Re: Wireless AP not being seen

2004-08-06 Thread Ron Farrer
Alberto Alonso ([EMAIL PROTECTED]) wrote: > When you do > > iwconfig wlan0 essid > > are you using the broadcom chipset? Indeed. lspci -v: :00:09.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 02) Subsystem: Compaq Computer Corporatio

Re: Wireless AP not being seen

2004-08-06 Thread Alvin Oga
hi ya alberto On Thu, 5 Aug 2004, Alberto Alonso wrote: > I have a BCM94306 802.11g (rev 03) card which is seen using > the ndis driver bcmwl5 thats a broadcom chipset > ndiswrapper -l reports: > bcmwl5 present that's good .. but did bcmwl5 come from the cdrom that came with the pci card

Re: Re: Wireless AP not being seen

2004-08-05 Thread Alberto Alonso
When you do iwconfig wlan0 essid are you using the broadcom chipset? Thanks, Alberto -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: Wireless AP not being seen

2004-08-05 Thread John Summerfield
Alberto Alonso wrote: Are you sure it supports the BCM94306? I looked at their site and it isn't listed as supported. Also, it doesn't find it when doing a modprobe prism54 Thanks, Run the command lspci -v -v and then match the data against the info you see on the website. -- Cheers John -- s

Re: Wireless AP not being seen

2004-08-05 Thread Ron Farrer
Rajesh Menon ([EMAIL PROTECTED]) wrote: > Apparently, prism54 [prism54.org] supports the card. No it doesn't. I noticed this (the listing on the prism54 site) a while back. I am unsure why it is listed (someone goofed), but this card is a totally different chipset (made by broadcom) and is NOT c

Re: Wireless AP not being seen

2004-08-05 Thread Alberto Alonso
Are you sure it supports the BCM94306? I looked at their site and it isn't listed as supported. Also, it doesn't find it when doing a modprobe prism54 Thanks, Alberto On Thu, 2004-08-05 at 18:02, Rajesh Menon wrote: > Hi, > Apparently, prism54 [prism54.org] supports the card. And I know prims54

Re: Wireless AP not being seen

2004-08-05 Thread Rajesh Menon
Hi, Apparently, prism54 [prism54.org] supports the card. And I know prims54 supports scanning, as I'm using it as we speak. Maybe you want to give it a try (it comes as kernel module prism54 in the 2.6's). I can't comment on the bcmw15 however. HTH. On Thu, 5 Aug 2004, Alberto Alonso wrote: > I

Wireless AP not being seen

2004-08-05 Thread Alberto Alonso
I have a BCM94306 802.11g (rev 03) card which is seen using the ndis driver bcmwl5 ndiswrapper -l reports: bcmwl5 present Even though I can see wlan0 using iwconfig wlan0 the ESSID remains null. I can't set it to anything. When I do "iwlist wlan0 scanning" I get: wlan0 No scan results The A