On Tue, Sep 24, 2002 at 11:28:08AM -0400, Noah L. Meyerhans wrote:
> The filesystem isn't directly on /dev/hda is it? I would hope it's on a
> partition on that drive (/dev/hda1 or something).
Heh, yea I screwed that up.
(root@hour)~$ xfs_repair /dev/hdb1
works fine. thanks 8)
--
Regards
On Tue, Sep 24, 2002 at 05:15:21PM +0800, Patrick Hsieh wrote:
> I am running woody with 2.4.19 and xfs patch for 2.4.19 from SGI ftp
> site. Whey I type xfs_repair /dev/hda, I got the error
The filesystem isn't directly on /dev/hda is it? I would hope it's on a
partition on that drive (/dev/hda
ug:
(root@hour)~$ xfs_repair /dev/hdb
Phase 1 - find and verify superblock...
bad primary superblock - bad magic number !!!
attempting to find secondary superblock...
.
> Is there something wrong? Should I unmount the filesystem b
Hello list,
I am running woody with 2.4.19 and xfs patch for 2.4.19 from SGI ftp
site. Whey I type xfs_repair /dev/hda, I got the error
root@et:~# xfs_repair /dev/hda
Phase 1 - find and verify superblock...
bad primary superblock - bad magic number !!!
Is there something wrong? Should I
Kent West wrote:
>
> When I got home today I discovered that the power went off while I was out.
> When I turned on the monitor to my Debian potato box, I saw a message that
> said "bad magic number in super-block while trying to open /dev/hda1" and
> that the superbl
On 26 Jan 1980, Kent West wrote:
> When I got home today I discovered that the power went off while I was out.
> When I turned on the monitor to my Debian potato box, I saw a message that
> said "bad magic number in super-block while trying to open /dev/hda1" and
> that th
When I got home today I discovered that the power went off while I was out.
When I turned on the monitor to my Debian potato box, I saw a message that said
"bad magic number in super-block while trying to open /dev/hda1" and that the
superblock could not be read and that I should t
Hi,
After installing 2.0.31-pre10 a few days ago I started getting these
messages:-
Warning: bad magic number for tty struct (04:40) in release_dev
rs_close: bad serial port count; tty->count is 1, info->count is 2
04:40 looks after the modem and there is no mouse on ttyS1.
I changed to
8 matches
Mail list logo
