James Hosken wrote:
I think you may have found some thing. I've borrowed and put the machine
a old s3 graphics card. After running dpkg-reconfigure xserver-xfree86
and then looking in the log to see i810 still being flagged up it was
clear the dpkg-reconfigure xserver-xfree86 isn't updating the co
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Kent West wrote:
|
|> Thanks for all the surggestions, I have tried adding agpgart but there
|> was not change. Now the first error message is
|>
|> (EE) I810: Given depth (1) is not supported by i810 driver
|>
|> I have played around with the colour
I had a lot of problems with i810 video cards (intel graphics
extreme2's in particular). I ended up add the i810 framebuffer to the
kernel, setting "vga=791" in lilo.conf and using fbdev as the video
driver in XF86Config.
if it's an integrated card you may also need to allocate more memory to
Thanks for all the surggestions, I have tried adding agpgart but there
was not change. Now the first error message is
(EE) I810: Given depth (1) is not supported by i810 driver
I have played around with the colour depths, evening setting to 1 didn't
change this situation.
Did you play with these
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Kevin Mark wrote:
| On Sun, May 09, 2004 at 12:48:55PM +0100, James Hosken wrote:
|
|>-BEGIN PGP SIGNED MESSAGE-
|>Hash: SHA1
|>
|>
|>
|>James Hosken wrote:
|>|
|>|
|>| James Hosken wrote:
|>| | I've tying to configure xfree86 on a old PIII450
On Monday 10 May 2004 09:55 am, Micha Feigin wrote:
> > as if by magic as far as I can see. I did a little poking around, and
> > still have no clue.
[snip]
> It is loaded automatically by modprobe when loading the card driver
> which is probably loaded automatically by the X server.
Ah. That
On Sun, May 09, 2004 at 12:10:51PM -0400, Silvan wrote:
> On Sunday 09 May 2004 07:48 am, James Hosken wrote:
>
> > | To follow up from this, I've managed to get gnoppix working better than
> > | Knoppix. I have managed to copy the whole of Gnoppix's /etc/X11.
> > | What parts of /etc/X11 should I
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
James Hosken wrote:
|
|
| James Hosken wrote:
| | I've tying to configure xfree86 on a old PIII450, it running Sarge. It
| | has a on-board graphics card, the output from lspci is
| |
| | pcilib: Cannot open /sys/bus/pci/devices
| | :00:00.0 Host
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
James Hosken wrote:
| I've tying to configure xfree86 on a old PIII450, it running Sarge. It
| has a on-board graphics card, the output from lspci is
|
| pcilib: Cannot open /sys/bus/pci/devices
| :00:00.0 Host Bridge: Intel Corp. 82810 GMCh [Grap
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I've tying to configure xfree86 on a old PIII450, it running Sarge. It
has a on-board graphics card, the output from lspci is
pcilib: Cannot open /sys/bus/pci/devices
:00:00.0 Host Bridge: Intel Corp. 82810 GMCh [Graphics Memory
Controller Hub] (rev
10 matches
Mail list logo