There's a new program in unstable, netconf. You can go through the
initial setup again with dpkg-reconfigure base-config. The "manual" way
to set things up is to edit /etc/network/interfaces
Make sure the following is in there:
auto lo eth0
iface eth0 inet dhcp
then run /etc/init.d/networking
[EMAIL PROTECTED] wrote:
> the kernel in the potato install didn't detect my 3com mini pci(3c556B)
> ethernet card
on my T20, so i compiled the 2.4.1 kernel and now it detects it. but the
problem is i
still can't get on the net because i didn't configure networking during
install... so what
> On Sat, 10 Feb 2001 21:55:35 -0500
BizarroBum writes:
B> the problem is i still can't get on the net because i
B> didn't configure networking during install... so what
B> program can i run to configure networking? and how do
B> i configure the network when the network gives my
B> dy
On Sat, Feb 10, 2001 at 09:55:35PM -0500, [EMAIL PROTECTED] wrote:
> the kernel in the potato install didn't detect my 3com mini pci(3c556B)
> ethernet card on my T20, so i compiled the 2.4.1 kernel and now it detects
> it. but the problem is i still can't get on the net because i didn't
> conf
the kernel in the potato install didn't detect my 3com mini pci(3c556B)
ethernet card on my T20, so i compiled the 2.4.1 kernel and now it detects it.
but the problem is i still can't get on the net because i didn't configure
networking during install... so what program can i run to configure n
5 matches
Mail list logo
