steef wrote:
...AFAICT the bf24-kernel was used with woody, and, if i remember
well, had during installation of the os, to choose out of a list to
install the rtl-chip by hand. so,if i am right, go to the realtek
website, try to find the driver and install it by and.
regards,
8139 lan card on 2.4.18
On Thu, Aug 13, 2009 at 8:35 AM, Sandip Sandipnew.debianu...@yahoo.in
mailto:new.debianu...@yahoo.in wrote:
I am trying to install a realtek 8139 lan card on an old debian
machine -
2.4.18-bf2.4
The card is properly installed - as in when I connect the lan cable
From: Neal Hogan nealho...@gmail.com
To: Sandip Sandip new.debianu...@yahoo.in
Cc: debian-user@lists.debian.org
Sent: Thursday, 13 August, 2009 7:41:02 PM
Subject: Re: installing a realtek 8139 lan card on 2.4.18
On Thu, Aug 13, 2009 at 8:35 AM, Sandip
What else have you done? Did you just plug it in?
I also read up the network howto and tried things like putting eth0 in
/etc/network/interfaces, trying eth0 up, etc.
No use - till now.
What does you system think of the card (eg, what is the output of
lspci | grep Realtek of dmesg)?
From: Neal Hogan nealho...@gmail.com
To: Sandip Sandip new.debianu...@yahoo.in
Cc: debian-user@lists.debian.org
Sent: Saturday, 15 August, 2009 6:44:26 PM
Subject: Re: installing a realtek 8139 lan card on 2.4.18
What does you system think of the card (eg
a realtek 8139 lan card on 2.4.18
What does you system think of the card (eg, what is the output of
lspci | grep Realtek of dmesg)? What's the output of ifconfig -a?
lspci shows 00:0b.0 Ethernet Controller: MYSON Technologies Inc: Unknown
device 0803 (dont know from where has this MYSON come
I am trying to install a realtek 8139 lan card on an old debian machine -
2..4.18-bf2.4
The card is properly installed - as in when I connect the lan cable it the
lights on the card start blinking.
However, I am unable to access internet. Do I need to install drivers and how
do I do that?
On Thu, Aug 13, 2009 at 8:35 AM, Sandip Sandipnew.debianu...@yahoo.in wrote:
I am trying to install a realtek 8139 lan card on an old debian machine -
2.4.18-bf2.4
The card is properly installed - as in when I connect the lan cable it the
lights on the card start blinking.
However, I am
I am trying to install a realtek 8139 lan card on an old debian machine
- 2.4.18-bf2.4
I don't like to sound the bleeding obvious but I would suspect the driver for
that card might already be in a later kernel. The 2.4x kernel represents less
refinement than the 2.6x kernel.
--
CK
--
To
9 matches
Mail list logo
