Raul Lopez :
Hola, estoy tratando de hacer funcionar un modem utilizando pppconfig.
Probe de distintas maneras,pero no logro que se mantenga la conexion.
El modem disca, se conecta y luego se cierra la conexion.
Que dicen /var/log/messages y /var/log/daemon ?
--
Alexander aka alk[ anoide |
ppp via le port série (j'ai suivi grosso-modo le serial
laplink howto).
Entre les deux, je peux donc faire des ftp, ssh, etc.
L'ordinateur A est de temps à autre relié à internet via un FAI
(modem 56k) J'aimerais faire en sorte que B puisse profiter de cette
liaison, c'est-à-dire de faire
bonjour,
Le vendredi 27 août 2004, Alexandre gerussi a écrit...
Je suis quasiment sûr qu'il ne s'agit que d'écrire les bons fichiers
hosts, host.conf, resolv.conf et quelques commandes route et ifconfig,
mais lesquels ??
Pour compléter la réponse précédente:
* vérifier que le
On Fri, Aug 27, 2004 at 10:28:25PM +0200, Alexandre gerussi wrote:
L'ordinateur A est de temps à autre relié à internet via un FAI (modem 56k)
J'aimerais faire en sorte que B puisse profiter de cette liaison,
c'est-à-dire de faire comme si lui aussi était connecté au fournisseur.
apt-get
Bonjour à tous, voici un ptit problème qui m'agace car j'y ai déjà perdu
du temps, tout en n'y comprenant pas beaucoup plus qu'avant.
J'ai deux ordinateurs A et B sous linux, reliés entre eux par une
liaison ppp via le port série (j'ai suivi grosso-modo le serial laplink
howto).
Entre les
.
The name of the file is '/etc/resolv.conf'.
This file will be updated automagically by pppd or by the resolvconf
package if you have the latter installed (recommended).
Probably all you need to do is set the usepeerdns option for pppd.
Look in the global options file /etc/ppp/options , in the options
there if not listed or not assigned by dhcp.
The name of the file is '/etc/resolv.conf'.
This file will be updated automagically by pppd or by the resolvconf
Here, the values are defined in /etc/ppp/resolv/provider
--
Any technology distinguishable from magic is insufficiently advanced
/ppp/options , in the options file
for your modem /etc/ppp/options.tty*, and in the options file for your
provider /etc/ppp/peers/provider to see whether that option is
already set.
You might want to read the Networking chapter of the Debian Reference
for background information.
--
Thomas Hood
Okay
Kevin Mark [EMAIL PROTECTED] writes:
I will consider upgrading the kernel but it may take a while on dialup!
I feel your pain, since I'm in your situation. What I do is I
downloaded the mainline kernel once and kernel-package package. From
there on, I only download the patch for the new
Kevin Mark [EMAIL PROTECTED] writes:
M ppp c 108 0
That's just creating the ppp node manually. Udev should create
automatically without any rules as long as it shows up in the /sys
filesystem.
--
John L. Fjellstad
web: http://www.fjellstad.org/ Quis custodiet ipsos custodes
Kevin Mark [EMAIL PROTECTED] writes:
Running 2.6.7 on my server. Make sure that /sys/class/ppp/ppp gets
created (it has everything to do with sysfs and not udev actually).
I run Linux debian 2.6.4-1-386 #1 Sat Mar 13 17:49:12 EST 2004 i686 GNU/Linux
debian bin. kernel and udev
ii udev
On Mon, Aug 23, 2004 at 12:24:10AM +0200, John L Fjellstad wrote:
Kevin Mark [EMAIL PROTECTED] writes:
M ppp c 108 0
That's just creating the ppp node manually. Udev should create
automatically without any rules as long as it shows up in the /sys
filesystem.
--
Hi John,
yes
On Mon, Aug 23, 2004 at 12:27:03AM +0200, John L Fjellstad wrote:
Kevin Mark [EMAIL PROTECTED] writes:
Running 2.6.7 on my server. Make sure that /sys/class/ppp/ppp gets
created (it has everything to do with sysfs and not udev actually).
I run Linux debian 2.6.4-1-386 #1 Sat Mar 13
Hiya, just got a copy of woody r2, and installed it on my machine.
first timer. managed to get nvidia thingy to compile for my video card,
and solved the problem of
not finding screens. what a mission that. all good.
now however am stuck.
I can dial a ppp conection using wvdial, kppp, pon
, and installed it on my machine.
first timer. managed to get nvidia thingy to compile for my video card,
and solved the problem of
not finding screens. what a mission that. all good.
now however am stuck.
I can dial a ppp conection using wvdial, kppp, pon, and all works fine.
after changing bits
On Saturday 21 August 2004 16:58, Kevin Mark wrote:
I run Linux debian 2.6.4-1-386 #1 Sat Mar 13 17:49:12 EST 2004 i686
GNU/Linux debian bin. kernel and udev
ii udev 0.030-1/dev/ management daemon
package.
I did 'find /sys |grep ppp' and it got:
/sys/cdev/major/ppp
.
I did 'find /sys |grep ppp' and it got:
/sys/cdev/major/ppp
Is this what I should alias to /dev/ppp ?
No
You should look at how you add rules to udev to create it for you - see
http://www.reactivated.net/udevrules.php
--
Hi Alan,
thanks. I looked, not there. but I did do a new
Kevin Mark [EMAIL PROTECTED] writes:
this may be unrelated, but I started using 2.6 and recently added UDEV.
UDEV at the current time does not make a /dev/ppp, so I have to manually
use MKNOD to create this before I can dial with my modem.
Which udev version is this, because I use
On Fri, Aug 20, 2004 at 02:02:41PM +0200, John L Fjellstad wrote:
Kevin Mark [EMAIL PROTECTED] writes:
this may be unrelated, but I started using 2.6 and recently added UDEV.
UDEV at the current time does not make a /dev/ppp, so I have to manually
use MKNOD to create this before I can
So we see that something alsa left in /etc/modprobe.d knocked out ppp etc.
# pppd ...
pppd: This system lacks kernel support for PPP. This could be because
the PPP kernel module could not be loaded, or because PPP was not
included in the kernel configuration. If PPP was included as a
module
Weeks ago I installed and started using kernel 2.6.
As all was well, I decided to
apt-get --purge remove alsa-modules-2.4.26-1-k7
apt-get --purge remove kernel-image-2.4.26-1-k7
as I hadn't used them weeks, right.
Well, now I can't call out on my modem with ppp:
pppd: This system lacks kernel
can't call out on my modem with ppp:
pppd: This system lacks kernel support for PPP. This could be because
the PPP kernel module could not be loaded, or because PPP was not
included in the kernel configuration. If PPP was included as a
module, try `/sbin/modprobe -v ppp'. If that fails, check
Hallo Michael,
* Michael Boekels [EMAIL PROTECTED] [08-08-04 17:37]:
Aug 8 17:21:48 fire pppd[27035]: pppd 2.4.2 started by root, uid 0
Aug 8 17:22:19 fire pppd[27035]: LCP: timeout sending Config-Requests
abgesehen davon: weiss jemand wie man ausschaltet, dass sich nach 10 mal
teminated
Hi,
* Matthias Fechner [EMAIL PROTECTED] [09-08-04 11:13]:
* Michael Boekels [EMAIL PROTECTED] [08-08-04 17:37]:
Aug 8 17:21:48 fire pppd[27035]: pppd 2.4.2 started by root, uid 0
Aug 8 17:22:19 fire pppd[27035]: LCP: timeout sending Config-Requests
abgesehen davon: weiss jemand wie man
Hallo,
kann sich jemand mit diesem logausschnitt identifizieren? Bzw. kann mir jemand
sagen ob es eher ein Problem meinerseits ist oder eher eins der Telekom? und
wenn es eins meinerseits ist wie ich es ändern bzw verbessern kann?!
Dazu muss man sagen, manchmal komme ich ins internet, aber
Aug 8 17:22:49 fire pppd[27035]: Connect: ppp0 -- /dev/pts/2
Aug 8 17:23:20 fire pppd[27035]: LCP: timeout sending Config-Requests
Aug 8 17:23:20 fire pppd[27035]: Connection terminated.
Liegt an deinem Provider.
Schau auch mal in /var/log/ppp-connect-errors da wirst du weitere
Informationen
Leandro Guimaraens Faria Corsetti Dutra [EMAIL PROTECTED] writes:
Será que alguém aqui conseguiu fazer funcionar o PPP com o POP
da GVT, e pode passar as dicas?
Já fiz funcionar PPP até no exterior, mas no Norte do Paraná
está me dando um baile…
--
Leandro Guimarães Faria
Será que alguém aqui conseguiu fazer funcionar o PPP com o POP
da GVT, e pode passar as dicas?
Já fiz funcionar PPP até no exterior, mas no Norte do Paraná
está me dando um baile…
--
Leandro Guimarães Faria Corsetti Dutra +55 (44) 3028 7467 ext34
Rua Guarani 361 ap 601 – Z4
Leandro;
* Musashi corta a msg que Leandro Guimaraens Faria Corsetti Dutra enviou para
Still:
Será que alguém aqui conseguiu fazer funcionar o PPP com o POP
da GVT, e pode passar as dicas?
Já fiz funcionar PPP até no exterior, mas no Norte do Paraná
está me dando um baile
'-c 09 -a' (09 is Australia) and
it seems to work OK.
I have a PPP connection set up with an ISP that I can connect to from
another Debian unstable box (but that one has a real modem). I use PAP
authentication.
When I try to connect to the ISP using pon, the modem dials out, pppd
authenticates
Michelino Caroselli wrote:
Heike C. Zimmerer wrote:
Simon Brandmair [EMAIL PROTECTED] writes:
Nee sorry, das war wohl ein Missverstaendnis. Ich habe mich in meinem
ersten Posting auf Michelinos Mail vom 07 Jul 2004 bezogen, wo er
gemeint hat, dass das Rueckgaengigmachen des Patches
Am Samstag 31 Juli 2004 21:52 schrieb Frank Dalichow:
Ich werde wohl mein Least-cost-router script abklemmen und pon
sowie poff wieder von Hand betätigen.
Was verwendest Du denn da?
Was selbst-gestricktes, dass nicht unbedingt uneingeschränkt weiter zu
empfehlen ist, ob meiner mangelnden
Gerhard Gaußling wrote:
Übrigens war es bei mir so, daß alle 1.1 min aufgelegt wurde, und
ditrekt wieder eingewählt wurde. Das erhöht (je nach ISP) die
Einwahlkosten, verminder wahrscheinlich den Durchsatz, und führt dazu
kein actiove-filter zu verwenden, womit ich dann daueronline bin
Am Samstag 31 Juli 2004 21:52 schrieb Frank Dalichow:
Hallo Gerhard,
gerhard wrote:
Schade, das ist nu mal ein Bug, der mir persönlich mal merklich
Geld kostet! Ich werde wohl mein Least-cost-router script abklemmen
und pon sowie poff wieder von Hand betätigen.
Was verwendest Du denn
Michelino Caroselli [EMAIL PROTECTED] writes:
Wie Heike geschrieben hat: Auf das Ende der Diskussion warten.
Was Kernel 2.6.7 und Debian anbelangt, reicht offensichtlich die
Rckgngigmachung von
http://www.kernel.org/diff/diffview.cgi?file=%2Fpub%2Flinux%2Fkernel%2Fv2.6%2Fpatch-2.6.6.bz2;z=1276
Hi!
On Sun, 01 Aug 2004 13:40:05 +0200, Heike C. Zimmerer wrote:
Michelino Caroselli [EMAIL PROTECTED] writes:
Wie Heike geschrieben hat: Auf das Ende der Diskussion warten.
Was Kernel 2.6.7 und Debian anbelangt, reicht offensichtlich die
Rückgängigmachung von
Simon Brandmair [EMAIL PROTECTED] writes:
Michelino schrieb, dass es bei ihm trotzdem nicht funktioniert, das
kann ich aber (leider) nicht nachvollziehen.
Nee sorry, das war wohl ein Missverstaendnis. Ich habe mich in meinem
ersten Posting auf Michelinos Mail vom 07 Jul 2004 bezogen, wo er
Heike C. Zimmerer wrote:
Simon Brandmair [EMAIL PROTECTED] writes:
Michelino schrieb, dass es bei ihm trotzdem nicht funktioniert, das
kann ich aber (leider) nicht nachvollziehen.
Sorry, falls ich mich missverstndlich ausgedrckt habe:-\ Ich meinte,
dass es nicht zu 100% luft:
Zitat
| Wegen
gerhard wrote:
Weiß jemand, wie man diesen patch für kernel 2.6.7 verfügbar macht, oder
ob es ihn schon gibt, und ob er das Problem behebt?
Der ist seit 2.6.6 drin. Und er scheint für die 'Misere' mit
verantwortlich zu sein.
. ;)
In den change.logs des 2.6.8er kernels konnte ich mit den Suchbegriffen
ISDN ppp und active nichts entdecken [1].
Deshalb habe ich hier auch meine Suchergebnisse gepostet, weil ich
einfach nichts interessantes über den Status finden kann.
Auf welchen Listen werden denn solche kernel
Am 2004-07-31 13:19:08, schrieb gerhard:
Schade, das ist nu mal ein Bug, der mir persönlich mal merklich Geld
kostet! Ich werde wohl mein Least-cost-router script abklemmen und pon
sowie poff wieder von Hand betätigen.
Da bist Du nicht die einzige Person...
Auf welchen Listen werden denn
Simon Brandmair [EMAIL PROTECTED] writes:
Wenn ich das richtig interpretiere, heisst das, dass der Active-filter tot
ist.
Wrde ich nicht sagen. Es luft gerade eine E-Mail-Diskussion
(ausgehend von der pppd-Liste) zu diesem Thema, an der ich am Rand
beteiligt bin. Ich kann allerdings (noch)
gerhard wrote:
^^^ Du solltest dir einen vollen Namen zulegen, das erhöht die
Chancen auf eine Antwort.
Siehe auch z.B. http://www.kasper-online.de/goldmail/regel32.htm (und
andere Gemeinheiten;)
Am Samstag 31 Juli 2004 08:42 schrieb Michelino Caroselli:
Der ist seit 2.6.6 drin. Und er
dabei zu sein:
http://groups.google.com/groups?q=active+filter+ppp++group:fa.linux.kernelhl=enlr=ie=UTF-8group=fa.linux.kernelsa=Gscoring=d
Heike C. Zimmerers Hinweis folgend habe ich das hier gefunden:
http://thread.gmane.org/gmane.linux.ppp/1457
ist aber wohl nicht die maillist, die sie meinte
Am Samstag 31 Juli 2004 16:32 schrieb Michelino Caroselli:
gerhard wrote:
^^^ Du solltest dir einen vollen Namen zulegen, das erhöht die
Chancen auf eine Antwort.
Siehe auch z.B. http://www.kasper-online.de/goldmail/regel32.htm (und
andere Gemeinheiten;)
Ist mir auch schon aufgefallen,
Hallo Gerhard,
gerhard wrote:
Schade, das ist nu mal ein Bug, der mir persönlich mal merklich Geld
kostet! Ich werde wohl mein Least-cost-router script abklemmen und pon
sowie poff wieder von Hand betätigen.
Was verwendest Du denn da? Ich habe zwar kein Problem damit pon und poff
von Hand zu
Am Donnerstag 29 Juli 2004 14:31 schrieb Michelino Caroselli:
Simon Brandmair wrote:
On Thu, 29 Jul 2004 07:00:11 +0200, Michelino Caroselli wrote:
Simon Brandmair wrote:
[...]
Wenn ich das richtig interpretiere, heisst das, dass der
Active-filter tot ist.
Abwarten, kommt sicher
.
ciao
Gerhard
ps:
Bin über diese Suche darauf gestoßen:
http://www.google.com/u/iuussg?hl=enlr=ie=ISO-8859-1domains=uwsg.iu.eduq=2.6+AND+active+filter+ppp+%
22hypermail%2Flinux%2Fkernel%
22btnG=Google+Searchsitesearch=uwsg.iu.edu
On Thu, 29 Jul 2004 07:00:11 +0200, Michelino Caroselli wrote:
Simon Brandmair wrote:
[...]
Kann mir jemand erklären, was der Hintergrund davon ist. Der 2.6.7-Kernel
läuft ja so für mich schlechter als der 2.6.5.
Würde mich auch interessieren.
Ich hab nochmal gegoogelt und bin noch darauf
Simon Brandmair wrote:
On Thu, 29 Jul 2004 07:00:11 +0200, Michelino Caroselli wrote:
Simon Brandmair wrote:
[...]
[pppd legt trotz (beabsichtigten) Traffic auf]
Ich hab nochmal gegoogelt und bin noch darauf gestossen:
Danke, war mir damals nicht aufgefallen. Jetzt weiß ich wenigstens auf
dessus car,
pour me connecter à mon entreprise pour l'astreinte, j'ai une connection PPP un
peu particulière.
En effet, j'appelle une première fois le RAS de ma boîte qui m'authentifie et
raccroche la ligne.
Ensuite, il me rappelle sur ma ligne et alors seulement je suis connecté.
En outre, il n'y
CLR_ABORT Invalid
TIMEOUT 120
RING
CONNECT
HANGUP ON
ABORT NO CARRIER
name: nom de login
word: password
# postlogin
'' \d\c
# end of pppconfig stuff
ensuite dans /etc/ppp/peers mettre un fichier entrant_sortant contenant :
hide-password
noauth
connect /usr/sbin/chat -v -f /etc/chatscripts/onera
Guten Abend!
Nach ein paar Stunden rumsuchen habe ich rausgefunden, war mein pppd immer
exakt nach Ablauf der idle-time auch bei heftigem Traffic auflegt: Ab
Version 2.6.6 wurde ppp_generic.c gepatch. Wenn man diesen Patch
rückgangig macht, scheint der active-filter wieder zu funktionieren [1].
Simon Brandmair wrote:
Nach ein paar Stunden rumsuchen habe ich rausgefunden, war mein pppd immer
exakt nach Ablauf der idle-time auch bei heftigem Traffic auflegt: Ab
Version 2.6.6 wurde ppp_generic.c gepatch. Wenn man diesen Patch
rückgangig macht, scheint der active-filter wieder zu
Kenneth Jacker [EMAIL PROTECTED] wrote:
[...]
* Lost compression sync: disabling compression
Jul 25 13:16:55 localhost pppd[4004]: \
sent [CCP TermReq id=0x5Lost compression sync]
* Jul 25 13:16:55 localhost kernel: PPP: VJ decompression error
Jul 25 13:16:56 localhost last
* Lost compression sync: disabling compression
Jul 25 13:16:55 localhost pppd[4004]: \
sent [CCP TermReq id=0x5Lost compression sync]
* Jul 25 13:16:55 localhost kernel: PPP: VJ decompression error
Jul 25 13:16:56 localhost last message repeated 3 times
* Jul 25 13:16:57
[ sarge, kernel 2.4.26-1-686 ]
Well, I finally got my PPP link to work from home to office.
Unfortunately, however, after awhile things come to a halt when trying
to transfer (e.g., with 'scp', or 'firefox') a large number of bytes
(e.g., multiple 50k files in a row or installing a new 'firefox
All,
I'm running into difficulty testing an ATT Wireless EDGE PC card (Sony
Ericsson GC82) modem on Debian GNU/Linux 3.0 (Woody). I'm running PPP
2.4.2+20040202-0.backports.org.1. I'm using the debug and nodetach
options in my configuration file. I've got an Ethernet connection
established
can't figure out: I would like to be able
to bring my ppp connection up as a regular user. As root pon brings up
the connection without problem but as regular user I get the error:
Error: only members of the 'dip' group can use this command.
So I added my regular user account to this group (as root
Hello
Bram Mertens ([EMAIL PROTECTED]) wrote:
[starting pon as a regular user]
So I added my regular user account to this group (as root)
adduser m8ram dip
grep dip /etc/group now shows:
dip:x:30:m8ram
but I still get the error mentioned earlier.
AFAIK changes to groups should take
Moin!
* Bram Mertens [EMAIL PROTECTED] [040725 11:44]:
AFAIK changes to groups should take effect immediately. Can anybody
tell me what else I should check?
No, the group changes take effect, when you logout and agein login. The
output of »id« is quite usefull in those cases.
Yours
Incoming from Bram Mertens:
However there is one thing I can't figure out: I would like to be able
to bring my ppp connection up as a regular user. As root pon brings up
the connection without problem but as regular user I get the error:
Error: only members of the 'dip' group can use
s. keeling writes:
Consider adding it to dialout as well.
Not necessary.
--
John Hasler
[EMAIL PROTECTED] (John Hasler)
Dancing Horse Hill
Elmwood, WI
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Incoming from John Hasler:
s. keeling writes:
Consider adding it to dialout as well.
Not necessary.
Good to know, thanks. What's dialout for then?
--
Any technology distinguishable from magic is insufficiently advanced.
(*) http://www.spots.ab.ca/~keeling
- -
--
To
Hello
s. keeling ([EMAIL PROTECTED]) wrote:
Incoming from John Hasler:
s. keeling writes:
Consider adding it to dialout as well.
Not necessary.
Good to know, thanks. What's dialout for then?
To access the serial ports. With that you can for example use programs
like kppp without the
s. keeling writes:
What's dialout for then?
For situations where the user needs to use a serial port directly.
--
John Hasler
[EMAIL PROTECTED] (John Hasler)
Dancing Horse Hill
Elmwood, WI
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
Hi,
I have two ppp connection (actually they are pppoe connections) which
are simultaniously started by the init scripts.
I would like to specify which ppp device is used for a specific
connection (I have firewall rules which specify a certain devicename).
Is it possible to specify a ppp device
OK - ich nehm alles zurück.
beim Mac muss Störungsunempfindlichkeit aktivieren angeklickt
sein. sorry, mehr wars offensichtlich nicht. aber dieses kleine
detail hat wohl dafür gesorgt, dass nichts mehr vernünftig ankam beim
Mac-Client...
danke trotzdem
gruss
lars behrens
Hallo,
ich kann den weiter unten bereits einmal beschriebenen Fehler mit
MacOS-(Airport)Clients jetzt präzisieren.
windows 2000 und XP haben keine Probleme mit einer ppp-verbindung zu
meiner suse-poptop-Box. bei Macs mit einer airportkarte und dem
(10.3-)systemeigenen pptp-client sieht das
Ich hatte gerade meine config-files für meinen dial-zugang über modem
durchgeschaut. Und ich habe mein Paßwort nirgends gefunden.
Wo wird das gespeichert?
--
Haeufig gestellte Fragen und Antworten (FAQ):
http://www.de.debian.org/debian-user-german-FAQ/
Zum AUSTRAGEN schicken Sie eine Mail an
Moinmoin!
On Sun, Jun 13, 2004 at 04:35:07PM +0200, Christian Buhtz wrote:
Ich hatte gerade meine config-files für meinen dial-zugang über modem
durchgeschaut. Und ich habe mein Paßwort nirgends gefunden.
Wo wird das gespeichert?
AFAIK /etc/ppp/{p,ch}ap-secrets.
Gruß,
Flo
signature.asc
If I'm not confused, these two lines are in the
default Woody pap-secrets file.
# Evey regular user can use PPP ...
* (none)*
Can anyone explain why the server entry is (none)
rather than *?
Thanks, Peter E.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
navegar; y ya que
estamos, que esta PC también haga de Firewall.
¿Qué Howto, manual, referencia, página, etc. me recomiendan leer para lograr
mi objetivo? Les cuento que algo de Firewall he visto, pero muy poco, y de
PPP no se nada, ya que siempre usé LAN.
Muchas gracias
Ing. Jose Martin
Ese
El Fri, 4 Jun 2004 10:49:05 -0300
Jose Martin Ozcariz [EMAIL PROTECTED] escribió:
¿Qué Howto, manual, referencia, página, etc. me recomiendan leer para
lograr mi objetivo? Les cuento que algo de Firewall he visto, pero muy
poco, y de PPP no se nada, ya que siempre usé
telefónica cuando más de 1 PC quiere navegar; y ya que
estamos, que esta PC también haga de Firewall.
¿Qué Howto, manual, referencia, página, etc. me recomiendan leer para lograr
mi objetivo? Les cuento que algo de Firewall he visto, pero muy poco, y de
PPP no se nada, ya que siempre usé LAN.
Muchas
Hola gente!!
Quisiera implementar con una PC viajita que tengo un Gateway Dialup, es
decir, que sea esa máquina la que tenga el modem y que, cuando una o más PCs
de la intrante necesiten acceso a Internet, esta sea la que se conecte, de
modo de usar 1 línea telefónica cuando más de 1 PC
John Hasler said,
You or some script erroneously created
a default route to your LAN. Get rid of it.
Last weekend
find / -type f -exec grep add default {} \print
found only documentation. The offending
installation is nicely hidden.
Paul Galbraith said,
... try changing [add default
When ppp is started, these messages are recorded
in the syslog.
... pppd[n]: Couldn't set pass-filter in kernel:
Invalid argument
... pppd[n]: not replacing existing default route
to eth0[192.168.1.1]
... pppd[n]: Cannot determine ethernet address
Peter Easthope writes:
Does anyone recognize the problem or have a suggestion?
Yes. You or some script erroneously created a default route to your LAN.
Get rid of it. You neither need nor want it.
Ignore the pass-filter and proxy arp messages.
--
John Hasler
[EMAIL PROTECTED] (John Hasler)
[EMAIL PROTECTED] wrote:
When ppp is started, these messages are recorded
in the syslog.
... pppd[n]: Couldn't set pass-filter in kernel:
Invalid argument
... pppd[n]: not replacing existing default route
to eth0[192.168.1.1]
... pppd[n]: Cannot determine
[EMAIL PROTECTED] wrote:
When ppp is started, these messages are recorded
in the syslog.
... pppd[n]: Couldn't set pass-filter in kernel:
Invalid argument
... pppd[n]: not replacing existing default route
to eth0[192.168.1.1]
... pppd[n]: Cannot determine
Am Donnerstag, 27. Mai 2004 21:10 schrieb Michelle Konzack:
Am 2004-05-26 13:51:48, schrieb David.Nawrot:
Hallo
Ich habe folgenden Eintrag in meiner Crontab
* * * * * rootifconfig | grep ppp0 || pon
Damit wird die Internetverbindung überprüft und bei bedarf
wiederaufgebaut.
From: Iain Mac Donald [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: ppp setup problem
Date: Wed, 19 May 2004 14:31:40 +0100
On Wed, 2004-05-19 at 13:00, Ogya Chief wrote:
I will check the modem documentation to see what is required.
As an example here is the pertinent line for one of my
On Wed, 19 May 2004 21:45:32 +0200
C. Mourad Jaber [EMAIL PROTECTED] wrote:
Nicolas Rueff wrote:
Pour reprendre le problème à l'endroit:
- quelle version de pppd
- quel modem
- quelle interface (usb / eth)
- quel provider
Je crois que j'ai une explication...
Je suis chez
Le Fri, 21 May 2004 09:27:04 +0200, dans son impérissable
« Re: stabilité de ppp...»,
Nicolas Rueff [EMAIL PROTECTED] écrivait :
C'est bien la première fois que j'entends ça. C'est un problème
récurrent avec les modems USB, mais en eth ...
Ils m'ont conseillé d'acheter un transfo de 500mA
François TOURDE wrote:
Je crois que j'ai une explication...
Je suis chez free avec un sagem 908 en ethernet ( eth0 )... l'alim est
insuffisante et des fois... il plante dixit la hotline de free...
Ils m'ont conseillé d'acheter un transfo de 500mA au lieu du 250
fourni
Ils ont
Le 20.05.2004 10:27:57, C. Mourad Jaber a écrit :
François TOURDE wrote:
Je crois que j'ai une explication...
Je suis chez free avec un sagem 908 en ethernet ( eth0 )... l'alim
est
insuffisante et des fois... il plante dixit la hotline de free...
Ils m'ont conseillé d'acheter un transfo
messages précédents?
Ça ne me semble pas si incohérent que ça comme fonctionnement. Je
pense que c'est un bug de ppp (qui quitte alors qu'il ne devrait pas),
mais j'ai eu la flemme de faire un rapport de bug.
--
Perl itself is usually pretty good about telling you what you shouldn't
do
ppp (qui quitte alors qu'il ne devrait pas),
mais j'ai eu la flemme de faire un rapport de bug.
C'est malheureusement possible... vers midi, même topo :( et le modeme
n'avait pas planté puisque que le redémarrage de pppd s'est fait
immédiatement...
au niveau des versions : kernel 2.4.26
Le 12558ième jour après Epoch,
C. Mourad Jaber écrivait:
François TOURDE wrote:
Ça ne me semble pas si incohérent que ça comme fonctionnement. Je
pense que c'est un bug de ppp (qui quitte alors qu'il ne devrait pas),
mais j'ai eu la flemme de faire un rapport de bug.
C'est malheureusement
Nicolas Rueff wrote:
Pour reprendre le problème à l'endroit:
- quelle version de pppd
- quel modem
- quelle interface (usb / eth)
- quel provider
Je crois que j'ai une explication...
Je suis chez free avec un sagem 908 en ethernet ( eth0 )... l'alim est
insuffisante et des fois... il
Le 12557ième jour après Epoch,
C. Mourad Jaber écrivait:
Nicolas Rueff wrote:
Pour reprendre le problème à l'endroit: - quelle version de pppd
- quel modem
- quelle interface (usb / eth)
- quel provider
Je crois que j'ai une explication...
Je suis chez free avec un sagem 908 en ethernet (
From: richard lyons [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: ppp setup problem
Date: Tue, 18 May 2004 06:04:15 -0400
On Tuesday 18 May 2004 05:25, Ogya Chief wrote:
Dear All:
Whilst trying to set up ppp, I ended up with a system that does not
connect to the net. Whatever option I
On Wed, 2004-05-19 at 09:11, Ogya Chief wrote:
It failed
with the message NO DIALTONE. I also tried with pppconfig and I got the
same message.
That's a big clue. Try plugging a 'phone into your wall socket and try
dialling out. Did you hear a dial tone? If that works try plugging in
your
Iain Mac Donald wrote:
On Wed, 2004-05-19 at 09:11, Ogya Chief wrote:
It failed
with the message NO DIALTONE. I also tried with pppconfig and I got the
same message.
That's a big clue. Try plugging a 'phone into your wall socket and try
dialling out. Did you hear a dial tone? If that
That's a big clue. Try plugging a 'phone into your wall socket and try
dialling out. Did you hear a dial tone? If that works try plugging in
your modem again. If it still doesn't work are you using the correct
cables?
I did plug a phone into the phone socket of the modem and it worked.
If your
On Wed, 2004-05-19 at 13:04, Katipo wrote:
If you don't have a dial tone, nothing will dial out, it doesn't matter
what string you attach to it, you've got a dead line.
You have to attend to that variable before you can go any further with
any sort of analysis.
Not true! The dial tone is
David writes:
If you don't have a dial tone, nothing will dial out, it doesn't matter
what string you attach to it, you've got a dead line.
We don't know where the OP is located. Some phone systems produce
non-standard dialtones that are not recognized by some modems.
BTW you do not have to
On Wed, 2004-05-19 at 13:00, Ogya Chief wrote:
I will check the modem documentation to see what is required.
As an example here is the pertinent line for one of my modems
cat /etc/wvdial.conf | grep X3
Init2 = ATQ0 V1 E1 X3 S0=0 C1 D2 +FCLASS=0
But check your modem manual your settings
On Tue, 18 May 2004 00:03:34 +0200
C. Mourad Jaber [EMAIL PROTECTED] wrote:
Bonjour,
mon démon ppp ne supporte pas la déconnexion hebdomataire de mon
fournisseur d'accés...
J'ai pourtant mi le options ki vont bien ( persist, configré un noubre
de reconnexion... ).
dans mon syslog j'ai
701 - 800 of 4967 matches
Mail list logo