Hola compañeros listeros.
Hace casi un año investigué al amigo Sendmail para tratar de instalarlo y
manipularlo en mi Debian, pero resultó ser de lo más enrrevesadamente
complejo (al menos para alguien sin mucha experiencia en linux como yo), por
lo que no llegué muy lejos. Este año me he
Christian Kerbetz [EMAIL PROTECTED] meinte:
ich versuche krampfhaft dem Exchange 2003 Server mit Servicepack 1
beizubringen dass er die Mails ueber einen Sendmail (SMTP AUTH + TLS)
Server schicken soll. Die Authentifizierung klappt, nur der Exchange
uebergibt dann keine Daten
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hallo Liste,
ich versuche krampfhaft dem Exchange 2003 Server mit Servicepack 1
beizubringen dass er die Mails ueber einen Sendmail (SMTP AUTH + TLS)
Server schicken soll. Die Authentifizierung klappt, nur der Exchange
uebergibt dann keine Daten...
Am
Bonjour,
après une reinstall de sendmail j'ai les messages d'erreur suivants:
Configuring network interfaces.../etc/mail/Makefile:232: warning:
overriding commands for target `update_tls'
/etc/mail/Makefile:225: warning: ignoring old commands for target
`/etc/mail/tls/starttls.m4'
Updating
requisito tengo que tiene que estar instalado el sendmail
hago un apt-get install sendmail y obtengo lo siguiente:
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have
Bonjour,
je voudrais monter
un sendmail en relai SMTP.
J'ai un photocopieur
avec une fonctionalité d'email mais il me faut un serveur-relai SMTP sur mon
LAN.
Pour l'instant, la
question n'est pas de monter un serveur de messagerie, je voudrais juste que ce
copieur envoi les documents
El mensaje te dice que seria necesario instalar los paquetes sendmail-bin y
rmail, pero que ellos no serán instalados.
Hay estos parquetes para Sarge?
Saludos, Miguel D.
On Thu, 10 Feb 2005 11:41:02 +0100
[EMAIL PROTECTED] wrote:
Buenas, tengo Debian Sarge instalado. Quiero instalar el
11:10 AM
Para
debian-user-spanish@lists.debian.org
cc
Asunto
Re: problemas instalando
el sendmail
El mensaje te dice que seria necesario instalar los
paquetes sendmail-bin y rmail, pero que ellos no serán instalados.
Hay estos parquetes para Sarge?
Saludos, Miguel D.
On Thu, 10
Hallo,
mittels ethtool kann ich in meinem mapscript auf meinem Notebook beim Booten
feststellen ob ein Link da ist oder nicht (Link detected:). Je nach
Netzwerkumgebung kann ich damit dann Sendmail oder anderes (apt-proxy)
parametrisieren.
Mein Anliegen wäre nun um den Boot-Prozess etwas zu
Am 2005-01-24 16:00:40, schrieb [EMAIL PROTECTED]:
Hallo,
Mein Anliegen wäre nun um den Boot-Prozess etwas zu beschleunigen Sendmail
ganz abzudrehen, falls ich ohne Netzwerk boote. Sendmail versucht beim
Booten an 2 Stellen den Hostnamen aufzulösen, was mangels DNS recht lange
dauert
Pessoal estou usando sendmail no meu servidor, porem o
provedor mudou para postfix, estou usando desvio de
smtp.
Porem quando o sendmail vai tentar autenticar no
postfix, acusa o seguinte erro durante a tentativa de
autenticacao. Ja procurei e nao encontrei nada, estou
postando tambem a pergunta
Pessoal estou usando sendmail no meu servidor, porem o
provedor mudou para postfix, estou usando desvio de
smtp.
Porem quando o sendmail vai tentar autenticar no
postfix, acusa o seguinte erro durante a tentativa de
autenticacao. Ja procurei e nao encontrei nada, estou
postando tambem a pergunta
lägga till utan någon större framgång.
Finns det något vettigt sätt att med sendmail ändra vad den pillar in som
hostname?
Det finns ingen möjlighet att byta ut sendmail helt och hållet istället?
Postfix t.ex. är till stor del kompatibel med sendmail, förutom på bugg
och svår-konfig fronten då
Tomas Gradin skrev:
Det finns ingen möjlighet att byta ut sendmail helt och hållet
istället?
Postfix t.ex. är till stor del kompatibel med sendmail, förutom på bugg
och svår-konfig fronten då =)
Det där är FUD. En modern sendmail är varken buggig eller
svårkonfigurerad.
Tja, det var
Nu hänger jag inte med i sendmailsvängarna så bra, men har cf-formatet
bytts ut mot något enklare? Visst, m4-makron och ev ännu högre abstraktion
i all ära, men ska man göra mer avancerade inställningar behöver man väl
fortfarande försöka förstå vad som händer i exempelvis en rad som denna:
R$+
duplicado, no es mi intención mandarlo 2 veces. Aquí va:
Hola, muy buenas noches a todos.
En primer lugar voy a plantear el problema. El sendmail funciona
perfectamente, excepto cuando lo intento enviar a alguna dirección
@geanostrum.org. El host de mi pc es el mismo, .geanostrum.org. Yo soy nuevo
en
duplicado, no es mi intención mandarlo 2 veces. Aquí va:
Hola, muy buenas noches a todos.
En primer lugar voy a plantear el problema. El sendmail funciona
perfectamente, excepto cuando lo intento enviar a alguna dirección
@geanostrum.org. El host de mi pc es el mismo, .geanostrum.org. Yo soy nuevo
en
?is respondido por otros motivos disculpad por el correo
duplicado, no es mi intenci?n mandarlo 2 veces. Aqu? va:
Hola, muy buenas noches a todos.
En primer lugar voy a plantear el problema. El sendmail funciona
perfectamente, excepto cuando lo intento enviar a alguna direcci?n
voy a plantear el problema. El sendmail funciona
perfectamente, excepto cuando lo intento enviar a alguna dirección
@geanostrum.org. El host de mi pc es el mismo, .geanostrum.org. Yo soy nuevo
en esto y no sé si me esté explicando bien para que me entendáis. El caso es
que me va bien con todos menos
Hola, muy buenas noches a todos.
En primer lugar voy a plantear el problema. El sendmail funciona
perfectamente, excepto cuando lo intento enviar a alguna dirección
@geanostrum.org. El host de mi pc es el mismo, .geanostrum.org. Yo soy nuevo
en esto y no sé si me esté explicando bien para que me
Hi,
I want to be able to send mail from the console, i tried this and
thats the result,
any one recognizing the problem ?
slg:/home/zazu# mail [EMAIL PROTECTED]
Subject: hi
testing
.
Cc:
slg:/home/zazu# Can't send mail: sendmail process failed with error code 67
Checking sendmail running
send mail: sendmail process failed with error code 67
Checking sendmail running:
root 5630 0.0 2.3 7244 2888 ?Ss 17:37 0:00
sendmail: MTA: accepting connections
root 5681 0.0 1.7 15180 2224 ?Ss 17:42 0:00 sshd:
zazu [priv] v]
zazu 5684 0.0 1.8
Kim Onnel wrote:
I want to be able to send mail from the console, i tried this and
thats the result,
Cc:
slg:/home/zazu# Can't send mail: sendmail process failed with error code 67
It would be nice if there was a list of those codes, but they seem to be
pretty elusive. Wishlist bug.
You
Is it possible to set-up auth SMTP using sendmail in debian?
I have a mail server with sendmail installed (and openprotect).
I would like to set-up authenticated smtp so that users can send email
through this server by authenticating first.
All the users have pop3 accounts on the server.
How
Playing with munin on unstable. Trying to get the sendmail_mailstats
and sendmail_mailtraffic plugins to work.
These rely on the mailstats program.
mailstats returns the following:
MSP statistics...
mailstats: /var/lib/sendmail/sm-client.st: No such file or directory
MTA statistics
Dear readers,
I think that I were not too smart when upgrading the held back package
sendmail for Debian testing. I got the following troubles:
1) The installation program tries to build databases e.g. /etc/mail/access.db.
For some reasons it tries to create a file access.new.db
On Mon, 13 Dec 2004, Steven Jones wrote:
piffle...sendmail works fine, real easy to add in clamav/clamav-milter
...and rootkits :-)
as well, far easier than postfix.
eh six of one and half a dozen of the other I suppose. I've used
sendmail, exim, and postfix. I prefer postfix. None
On Fri, 10 Dec 2004, Paul Hailey wrote:
Hi
I've installed various webmin packages on Debian Woody successfully but
both webmin-sendmail and webmin-fetchmail do not yet appear on the webmin
page used remotely from a client browser sourced from the server.
Has anyone come across this non
piffle...sendmail works fine, real easy to add in clamav/clamav-milter as well,
far easier than postfix.
MS's NT stands for new technology are you suggesting because its newer than
unix we should swap to it?
;]
Also the webmin sendmail (o) options in Sarge 3.1 edits the sendmail.cf
directly
Hello all
When I Made A New sendmail.cf for antispam
it shows an error related temporary system failure.
NOw what is this process called ...
telnet localhost smtp
Thanks in advance.
=
Birthdays ---
1869 Henri Matisse (artist) - December 31
1976 Jeffrin Jose (Hobby Sinner) - December
On Thu, Dec 09, 2004 at 07:36:27PM +0100, Sebastian Niehaus wrote:
Peter Wiersig [EMAIL PROTECTED] writes:
Diese IP-Adresse musst du im sendmail bekannt machen, damit
diese Mails loswerden darf.
/etc/mail/access oder so, dann hash?
So wie ich die /etc/mail/submit.cf verstehe muesste
On Thu, 2004-12-09 at 23:35 -0500, Henry Flores / EasyComp wrote:
-Mensaje original-
De: Henry Flores / EasyComp [mailto:[EMAIL PROTECTED]
Enviado el: Jueves, 09 de Diciembre de 2004 11:06 p.m.
Para: '[EMAIL PROTECTED]'
CC: '[EMAIL PROTECTED]'
Asunto: RV: Error en sendmail al tratar
On Thu, 2004-12-09 at 22:42 -0300, Rossy Roman Salgado wrote:
[...]
Si el server de tu trabajo permite relay de ips dinamicas debe tener
autentificacion para decidir a quien permite el relay si no es un open
relay listo para ser presa de los spammers.
Por supuesto que no es open relay.
On Thu, 2004-12-09 at 23:05 -0500, Henry Flores / EasyComp wrote:
Hola.
Ingresando a la pagina web y via(web mail) SquirrelMail version 1.2.10
si puedo enviar los correos desde las 2 pcs que estan en otra red (pues
ahora ambas tiene el problema del relay denied).
Alguna otra
Hi
I've installed various webmin packages on Debian Woody successfully but
both webmin-sendmail and webmin-fetchmail do not yet appear on the webmin
page used remotely from a client browser sourced from the server.
Has anyone come across this non-appearance of webmin-sendmail?
webmin-sendmail
Christian Völker [EMAIL PROTECTED] writes:
[...]
Insgesamt sind mailserver nicht mein Spezialgebiet.
Das wäre für mich schon ein guter Grund, Sendmail nicht zu benutzen.
[...]
- Wenn ich mich per ssh einlogge und auf der Konsole mail
aufrufe, um mir selbst eine Mail zu schicken
musst du im sendmail bekannt machen, damit diese
Mails loswerden darf.
/etc/mail/access oder so, dann hash?
--
Haeufig gestellte Fragen und Antworten (FAQ):
http://www.de.debian.org/debian-user-german-FAQ/
Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED]
mit dem Subject unsubscribe
Re enviando
-Mensaje
original-
De: Henry Flores / Cibertec
[mailto:[EMAIL PROTECTED]
Enviado el: Jueves, 09 de
Diciembre de 2004 04:12 p.m.
Para:
debian-user-spanish@lists.debian.org
Asunto: Error en sendmail al
tratar de enviar correos desde Microsoft outlook
Buenas tardes
On Thu, 2004-12-09 at 16:32 -0500, Henry Flores / EasyComp wrote:
Re enviando
-Mensaje original-
De: Henry Flores / Cibertec [mailto:[EMAIL PROTECTED]
Enviado el: Jueves, 09 de Diciembre de 2004 04:12 p.m.
Para: debian-user-spanish@lists.debian.org
Asunto: Error en sendmail
On Thu, 2004-12-09 at 16:32 -0500, Henry Flores / EasyComp wrote:
Re enviando
-Mensaje original-
De: Henry Flores / Cibertec [mailto:[EMAIL PROTECTED]
Enviado el: Jueves, 09 de Diciembre de 2004 04:12 p.m.
Para: debian-user-spanish@lists.debian.org
Asunto: Error en sendmail al
On Thu, 2004-12-09 at 17:12 -0500, Henry Flores / EasyComp wrote:
Buenas tardes:
No se exactamente que es eso, pero te adjunto el mensaje.
El winfile.dat (Transport Neutral Encapsulation Format) no me
funciona ;)
Aqui te paso una liga de como enviar los headers del mensaje de error en
Buenas tardes.
Rossy
La pc desde la cual quiero enviar los mensajes se conecta a internte via
adsl y obtiene una ip para salida a internet aleatoriamente, esta pc se
encuentra en una oficina distinta a la del servidor de correos
(sendmail) el cual tiene la ip pública ¿Lo que me comentas lineas
Asunto: RE: Error en sendmail al tratar de enviar correos desde
Microsoftoutlook
On Thu, 2004-12-09 at 17:12 -0500, Henry Flores / EasyComp wrote:
Buenas tardes:
No se exactamente que es eso, pero te adjunto el mensaje.
El winfile.dat (Transport Neutral Encapsulation Format) no me
funciona
Buenas tardes:
No se exactamente que es eso, pero te adjunto el mensaje.
-Mensaje original-
De: Erick Lopez Carreon [mailto:[EMAIL PROTECTED]
Enviado el: Jueves, 09 de Diciembre de 2004 04:59 p.m.
Para: Henry Flores / EasyComp
CC: debian_user_spanish
Asunto: RE: Error en sendmail al
correos
(sendmail) el cual tiene la ip pública ¿Lo que me comentas lineas abajo
se aplica también a este caso particular.
No importa donde este el servidor. En mi caso, envio mi correo desde mi
casa (conexion de banda ancha, con ip dinamica) a un servidor en mi
trabajo (ip fija), en otra red
, esta pc se
encuentra en una oficina distinta a la del servidor de correos
(sendmail) el cual tiene la ip pblica Lo que me comentas lineas abajo
se aplica tambin a este caso particular.
No importa donde este el servidor. En mi caso, envio mi correo desde mi
casa (conexion de banda ancha
[...]
Si el server de tu trabajo permite relay de ips dinamicas debe tener
autentificacion para decidir a quien permite el relay si no es un open
relay listo para ser presa de los spammers.
Por supuesto que no es open relay. Hay opciones como pop-before-smtp y
los DNS dinamicos para poder
keine weiter gehenden Ansprueche daran, er
soll einfach moeglichst bald laufen und kein open relay sein.
Deshalb moechte ich moeglichst den vorinstallierten sendmail
weiter nutzen und nicht auf den mir an sich sympathischeren
postfix umsteigen.
- Meine Debian Erfahrung ist sehr endlich. Zu
laufen und kein open relay sein.
Deshalb moechte ich moeglichst den vorinstallierten sendmail
weiter nutzen und nicht auf den mir an sich sympathischeren
postfix umsteigen.
Was heisst Backend? Nur senden und postfix@ abuse@ webmaster@ und die
Adresse von der aus du sendest als moegliche
anfangen.
Du versuchst, per smtp nach 127.0.0.1 eine Mail mit externen
Empfaenger loszuwerden. Schau mal in /var/log/mail/mail.log nach,
welche Remote-IP versuchte, die Mail loszuwerden.
Diese IP-Adresse musst du im sendmail bekannt machen, damit diese
Mails loswerden darf. (Oder die Submit-Methode von
verkehrt: Wenn man einen Dienst nur
nach innen hin anbieten will, ist es einfacherer und sicherer,
dafuer zu sorgen, dass er auch nur nach innen angeboten wird.
Im konkreten Fall bedeutet das, den MTA so zu konfigurieren, dass er
nur auf 127.0.0.1 lauscht.
Wie das mit sendmail funktioniert, kann ich
moeglichst bald laufen und kein open relay sein.
Nimm exim - das ist quasi der Standard-MTA eines Debian-Systems.
Deshalb moechte ich moeglichst den vorinstallierten sendmail
weiter nutzen und nicht auf den mir an sich sympathischeren
postfix umsteigen.
Schau Dich mal ein wenig im Umfeld von
Benedikt Christopeit schrieb am Donnerstag, 02. Dezember 2004 um 13:31:48 +0100:
Hat sich hier schon mal mit sendmail und sender based header rewriting
auseinandergesetzt?
ja, aber ich kapier' nicht was Du machen willst
Stellt euch vor, ihr habt die domaene abc.de von dort gehen mails raus
Hat sich hier schon mal mit sendmail und sender based header rewriting
auseinandergesetzt?
Stellt euch vor, ihr habt die domaene abc.de von dort gehen mails raus
an einen kunden: fgh.ij da abc.de aber zum netz von fgh.ij gehoert,
leasst die firewall mails, die von abc.de oder fgh.ij kommen nicht
Pessoal,
Alguém já viu o erro abaixo ?
Eu digitei no prompt
# echo . | mail -s TEste [EMAIL PROTECTED]
E não consegui enviar a mensagem porque recebi mensagem abaixo.
Dec 1 12:04:23 larissa sendmail[7675]: My unqualified host name
(larissa) unknown; sleeping for retry
PS. larissa é o
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hugo Rebello wrote:
| Pessoal,
|
| Alguém já viu o erro abaixo ?
| Eu digitei no prompt
| # echo . | mail -s TEste [EMAIL PROTECTED]
|
| E não consegui enviar a mensagem porque recebi mensagem abaixo.
|
| Dec 1 12:04:23 larissa sendmail[7675]: My
consegui enviar a mensagem porque recebi mensagem abaixo.
|
| Dec 1 12:04:23 larissa sendmail[7675]: My unqualified host name
| (larissa) unknown; sleeping for retry
Falta voce qualificar o dominio no arquivo de configuracao do sendmail.
A configuracao padrao é localhost, que pega o hostname da
I have just built a sendmail box with the sarge verion of Debian, I find it is
refusing connections inward but send mail out correctly. How can I get the
server to accept incoming mail?
I have put lines into access with,
Connect:localhost RELAY
Connect:130.195
On Mon, 29 Nov 2004, Steven Jones wrote:
I have just built a sendmail box with the sarge verion of Debian, I find it
is refusing connections inward but send mail out correctly. How can I get the
server to accept incoming mail?
I have put lines into access with,
Connect:localhost
AM
Subject: Re: php + sendmail
Correccion... la función si trabaja.. el sendmail y esas cosas si
funciona, lo que no funciona es el traspaso de variables de un php a
otro... me explico... se ingresan los datos en una web, luego al
presionar enviar... van a dar a otra web que envia el correo con
O syslog-ng não funcionou.
Juro que ainda não entendi tudo. Mas, olhando com calma, vejo o seguinte:
- o cron.daily/sysklogd faz um roteamento baseado em
/usr/sbin/syslogd-listfiles
- /usr/sbin/syslogd-listfiles é um perl que começa assim: $conf =
/etc/syslog.conf
- dentro do
# syslogd-listfiles --help
Debian GNU/Linux syslogd-listfiles. Copyright (c) 1997,2001
Martin Schulze. This is free software; see the GNU General Public Licence
version 2 or later for copying conditions. There is NO warranty.
Usage: syslogd-listfiles options
Options: -f file
Hello,
I need some help with sendmail.. I am trying to make it write out some type
of information in the message to who the message is for. I thought I could
use the for [EMAIL PROTECTED] part in the message..
But it seems that it ignores to write this out if there is more then one
recipient
Hi Sven,
Sven Göran [EMAIL PROTECTED] wrote :
I need some help with sendmail.. I am trying to make it write out
some type of information in the message to who the message is for.
I thought I could use the for [EMAIL PROTECTED] part in the
message..
There is no for part in SMTP afaik
On Sat, 13 Nov 2004 14:36:41 -0800 (PST), Matt Perry
[EMAIL PROTECTED] wrote:
Can anyone tell me if there's a QA setup procedure for sendmail on
Debian? dpkg-reconfigure sendmail just exits to the shell with no output.
You can try to change debconf verbosity, dpkg-reconfigure -plow
sendmail
Can anyone tell me if there's a QA setup procedure for sendmail on
Debian? dpkg-reconfigure sendmail just exits to the shell with no output.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
El vie, 29-10-2004 a las 11:07 -0300, Carlos Molina M. escribió:
Nelson... al cambiar el valor de register_globals, funciono altiro...
Es un error modificar register_globals a on. Mucho mejor hubiera sido
que modificaras tus scripts para adaptarlos a la sintaxis de php4.
--
faro arroba
Eriberto, e ai?? Obteve alguma resposta positiva? Ou tudo anda na mesma?
Obrigado,
Marcos Lazarini
Eriberto wrote:
Já havia reparado isso. No caso, eu acabo de instalr o syslog-ng. Vamos
ver se funciona...
[]s
Eriberto - www.eriberto.cjb.net
Marcos Vinicius Lazarini escreveu:
Cara, eu
Eriberto wrote:
Pessoal,
Estou usando sendmail. O /etc/logrotate.conf está configurado para
rotear semanalmente. No entanto, o mail.log está sendo roteado
diariamente. Solicitei 48 backups de roteamento. Ele só faz 6. O
/etc/logrotate.d/sendmail está desabilitado.
Alguém pode ajudar
Já havia reparado isso. No caso, eu acabo de instalr o syslog-ng. Vamos
ver se funciona...
[]s
Eriberto - www.eriberto.cjb.net
Marcos Vinicius Lazarini escreveu:
Cara, eu sempre tive problemas com logrotate e adjacencias.
pushed through
just fine (as I said mail from places like gmail gets to [EMAIL PROTECTED]
just fine).
host.foo.com does not show up anywhere in any of the sendmail configuration
files, but mail.foo.com is set up to relay for .foo.com But I don't think
that is the issue.
If I listen (read: tcpdump
sendmail-8.13.1 ... to avoid silly avoidable problems
c ya
alvin
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
as host.foo.com), but no host.foo.com
any machine that receives email should be an A record vs a cname
in your dns config files ( esp if it cannot deliver/receive the mail
properly )
Both mail.foo.com and host.foo.com are A records.
you should be using sendmail-8.13.1 ... to avoid silly
/root once in a while
( i like to see it delivered and look for whacky emails than
( delete it later
Both mail.foo.com and host.foo.com are A records.
good
you should be using sendmail-8.13.1 ... to avoid silly avoidable problems
Well, as I said I am using woody (Sendmail
...
- i'd use sendmail-8.13.1 and replace submit.cf too as its
broken in whacky ways
( 8.13.1 usually fixed any of my mail delivery/receipt issues )
I am looking into it.
-SHane
--
*
Shane Liebling
On Thu, 4 Nov 2004, Shane Liebling wrote:
But will this mater if it is addressed to [EMAIL PROTECTED], or only if it
is sent to [EMAIL PROTECTED]
many machine with foo.com listed in its /etc/mail/local-host-names will
receive the email ... which ever machine replied first
emails addressed to
Pessoal,
Estou usando sendmail. O /etc/logrotate.conf está configurado para
rotear semanalmente. No entanto, o mail.log está sendo roteado
diariamente. Solicitei 48 backups de roteamento. Ele só faz 6. O
/etc/logrotate.d/sendmail está desabilitado.
Alguém pode ajudar?
[]s
Eriberto
Hello,
My /etc/logrotate.conf:
weekly
rotate 48
create
#compress
#include /etc/logrotate.d
However, the mail.log is rotated daily and compressed. How to make
logrotate work fine with sendmail?
Thanks,
Eriberto
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble
On Wed, 3 Nov 2004, Eriberto wrote:
However, the mail.log is rotated daily and compressed. How to make
logrotate work fine with sendmail?
Use a different syslog package (that doesn't do its own rotation).
--
Rick Nelson
MSDOS didn't get as bad as it is overnight -- it took over ten years
Diferent package? I don't understanding.
Thanks for your response.
Eriberto
Richard A Nelson wrote:
On Wed, 3 Nov 2004, Eriberto wrote:
However, the mail.log is rotated daily and compressed. How to make
logrotate work fine with sendmail?
Use a different syslog package (that doesn't do its
Correccion... la función si trabaja.. el sendmail y esas cosas si
funciona, lo que no funciona es el traspaso de variables de un php a
otro... me explico... se ingresan los datos en una web, luego al
presionar enviar... van a dar a otra web que envia el correo con los
datos previamente
register global a on. Yo estube varios dias
liados y era solo eso...
Suerte.
On Fri, 29 Oct 2004 10:32:16 -0300, Carlos Molina M. [EMAIL PROTECTED] wrote:
Correccion... la función si trabaja.. el sendmail y esas cosas si
funciona, lo que no funciona es el traspaso de variables de un php a
otro... me
:32 AM
Subject: Re: php + sendmail
Correccion... la función si trabaja.. el sendmail y esas cosas si
funciona, lo que no funciona es el traspaso de variables de un php a
otro... me explico... se ingresan los datos en una web, luego al
presionar enviar... van a dar a otra web que envia el correo con
+ sendmail
Correccion... la función si trabaja.. el sendmail y esas cosas si
funciona, lo que no funciona es el traspaso de variables de un php a
otro... me explico... se ingresan los datos en una web, luego al
presionar enviar... van a dar a otra web que envia el correo con los
datos
si trabaja.. el sendmail y esas cosas si
funciona, lo que no funciona es el traspaso de variables de un php a
otro... me explico... se ingresan los datos en una web, luego al
presionar enviar... van a dar a otra web que envia el correo con los
datos previamente recolectados...
los log
Hola a todos,
instale un servidor apache+ssl+php
funciona todo menos el enviar un correo por medio de una pagina echa en
php...
si envio un correo a traves de la linea de comando funciona...
pero al hacerlo desde la web no.
lo que veo es que no entra a la funcion que envia el correo.
Alguien sabe
Hola, ¿que error te da?, ¿como estas haciendo para enviar el mail?
revisa que tengas todo bien configurado en tu php.ini y que estes
usando la sintáxis correcta puedes leerte:
http://ve.php.net/manual/es/ref.mail.php
Saludos.
On Thu, 28 Oct 2004 12:59:14 -0300, Carlos Molina M. [EMAIL PROTECTED]
no me da ningun error.. ningun mensaje
solo es como si no le pasara los datos a la funcion.. de echo, en ningun momento
entra a ella..
... cuando compile e instale php, no se creo el php.ini
tampoco veo el directorio phplib
por esta el error???
Christian Sanchez ha escrito:
Hola, ¿que error
Revisa los logs de sendmail, de apache y fijate si esta pasando algo,
compilaste el php? o lo instalaste con apt-get?, revisa bien la
sintáxis que estás usando para el script.
Saludos
On Thu, 28 Oct 2004 15:59:21 -0300, Carlos Molina M. [EMAIL PROTECTED] wrote:
no me da ningun error.. ningun
Hallo ihr alle,
ich habe hier ein System mit sendmail und sasl.
Soweit funzt auch alles pop3 und smtp funzen komplett i.O.
Nur jetzt habe ich 2 kleine Probleme:
Ich kann trotz sasl mails senden ohne mich authen zu muessen
Das würde ich gern abstellen.
Das zweite Problem ist wenn ich local
I'm having some errors after upgrading to sargs. For the most part
sendmail seems to be working fine, but upon noticing that my mail queue
was getting quite large, I had the following errors with the emails
Cannot open hash database /etc/mail/aliases.db: Invalid argument
and
Cannot open hash
lista,
resolvi tentar enviar e-mail usando o exim + o sendmail.
eu com um problema:
- como faço para mudar o campo from das mensagens para meu e-mail pessoal?
configurei o exim para enviar mensagens com o dominio terra.com.br
so que o problema é que ele envia e-mail com o seguinte formato
Em Fri, 22 Oct 2004 11:40:26 -0300, Franz Gustav Niederheitmann [EMAIL
PROTECTED] disse:
lista,
resolvi tentar enviar e-mail usando o exim + o sendmail.
eu com um problema:
desculpe pelos erros:
comrregindo : estou com um problema
- como faço para mudar o campo from das mensagens para
Jag försöker få sendmail att autentisera mot relay.bostream.com,
den burken kräver att man loggar in med login/lösen i klartext.
Någon som har lyckats med det?
Så här presenterar den sig (efter ehlo):
(Vissa strängar bytta mot ,,mittmaskinnamn och example.com)
250
This turned up in my mail log last night (logcheck). Is it anything to
worry about? I'm running woody with sendmail (latest stable version). I've
looked on Goog but haven't got much information about it.
Active System Attack Alerts
=-=-=-=-=-=-=-=-=-=-=-=-=-=
Oct 17 23:59:15 debian sm-mta
client settings have not changed, only the sendmail
server(upgrade).
And the funny thing is, this only happens to one domain, while there are
4 others that are having no problem, plus I don't even send out through
that server I send out through roadrunner, and none of my other email
accounts have
settings.
The above is *not* a message in the sendmail distribution
Now my client settings have not changed, only the sendmail
server(upgrade).
Are you sure it was sendmail ?
And the funny thing is, this only happens to one domain, while there are
4 others that are having no problem, plus I don't
requires authentication. Please check your mail
client settings.
The above is *not* a message in the sendmail distribution
Now my client settings have not changed, only the sendmail
server(upgrade).
Are you sure it was sendmail ?
And the funny thing is, this only happens to one
Hallo,
mein sarge system mit exim4 meldet regelmaessig diesen Fehler:
/usr/share/sendmail/sendmail: line 812: /usr/sbin/sendmail-msp: Datei
oder Verzeichnis nicht gefunden
Richtig ist: es gibt keine Datei /usr/sbin/sendmail.msp
Leider bin ich kein Scriptguru, dehalb weiss ich hier auch nicht
On Sun, 17 Oct 2004 the mental interface of
Werner Gast told:
Hallo,
mein sarge system mit exim4 meldet regelmaessig diesen Fehler:
/usr/share/sendmail/sendmail: line 812: /usr/sbin/sendmail-msp: Datei
^^^
Ist nicht Bestandteil einer exim Installation!
oder Verzeichnis
701 - 800 of 3010 matches
Mail list logo