As you can see by the subject of the e-mail I have a Tekram DC-390U2W Scsi controller and am trying to get kernel-2.6.0 running, but I can not get The sym53c8xx_2 driver to work properly. I have it build into my kernel and It detects my scsi hardware, but when it tries to mount any scsi partitions I get error reports about "parity error". I also have kernel-2.4.18 Installed and using the sym53c8xx driver without any problems. I have tried using: linux sym53c8xx=3Dmpar:n, pcifix:3 With no luck. Is the syntax wrong I have tried several way of typing this with no luck. I have also read the sym53c8xx.txt file included with the kernel documentation. One thing that I thought was strange was when booting kernel-2.4.18 and When detecting my hardware it shows: sym53c8xx: at PCI bus 0, device 15, function 0 sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up) sym53c8xx: 53c895 detected with Tekram NVRAM sym53c895-0: rev 0x1 on pci bus 0 device 15 function 0 irq 11 sym53c895-0: Tekram format NVRAM, ID 7, Fast-40, NO Parity sym53c895-0: SCSI bus mode change from 80 to 80. scsi0 : sym53c8xx-1.7.3c-20010512 but when booting kernel 2.6.0 the sym53c8xx: is replaced by sym: is this correct? Sorry to be so long winded, but I am NOT a programmer just a regular user, but this problem is driving me crazy. Could you please give me some insight to what I should try next. Also I tried compiling kernel-2.6.1 with no nluck Brad Cramer
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]