Bonjour, Je me décide à écrire parceque là je comprends vraiment plus ce qui se passe... Jusqu'à hier j'avais une config bi-écran avec comme display principal une Ati Rage Pro AGP sur un Sony Trinitron 17'' et comme display secondaire une TNT PCI sur un vieux 15''. Le tout avait été configuré sans aucun problème? Avant la TNT avait été remplacée par une Matrox Mystique sans aucun problème (modulo les modifs mineures dans la config de X).
Et hier j'ai eu une Banshee 16Mb PCI, pour remplacer la TNT. Etant donné le peu de problème que j'avais eu jusqu'à présent avec le bi-écran, je pensais que ce serait sans problème, mais en fait pas vraiment :-( J'ai tout d'abord rajouté le support pour la Banshee dans le kernel (CONFIG_DRM_TDFX), puis après reboot le kernel disait l'intialiser correctement. J'ai donc configuré X pour elle (donc en ayant enlevé l'Ati), tout se passe bien, X tourne sur le 15'' en 1024x768 16bits. reboot pour rebrancher l'Ati et modifier le XF86Config-4 comme j'avait fait les autres fois. Et là quand je lance startx, je vois sur le 15'' les messages du bios de la Voodoo, et là le système complet se plante! obligé de faire un hard reset... Après de multiples essais, j'ai finalement tenté de changer dans les options du BIOS la carte graphique initialisée au démarrage (INIT DISPLAY FIRST -> PCI SLOT), et là comme par miracle tout fonctionne! Pour essayer d'avoir quand même le 17'' comme écran utilisé en mode console j'ai interverti les cables écrans, et là je me retrouve avec une fréquence de rafraichissement ridicule sur le 17'' (donc branchée sur la banshee) -> ca fait mal aux yeux, et j'ai beau modifier les paramètres de fréquence de rafraichissment, rien à faire. Pourtant j'ai jamais eu ce problème avec l'Ati et la Banshee est censée être largement capable d'afficher cette résolution en 16bits (infos dans la doc de la carte). Donc je finis par réintervertir les cables pour que ce soit plus regardable, mais ca m'embète quand même d'utiliser le 15'' en mode console (en framebuffer 1024x768 16bits, si ca a quelque chose à voir) J'ai franchement du mal à comprendre pourquoi le fait de changer la carte initialisée par le BIOS change tant de choses alors que toutes les infos données par lspci et le kernel sont rigoureusement les mêmes dans les 2 cas. Donc si quelqu'un avait une explication ou un début de solution pour moi... Je joins mon XF86Config-4 et ce que me donne lspci pour les 2 cartes vidéo : 00:09.0 VGA compatible controller: 3Dfx Interactive, Inc. Voodoo Banshee (rev 03) 01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP 1X/2X (rev 5c) ### BEGIN DEBCONF SECTION # XF86Config-4 (XFree86 server configuration file) generated by dexconf, the # Debian X Configuration tool, using values from the debconf database. # # Edit this file with caution, and see the XF86Config-4 manual page. # (Type "man XF86Config-4" at the shell prompt.) # # If you want your changes to this file preserved by dexconf, only make changes # before the "### BEGIN DEBCONF SECTION" line above, and/or after the # "### END DEBCONF SECTION" line below. # # To change things within the debconf section, run the command: # dpkg-reconfigure xserver-xfree86 # as root. Also see "How do I add custom sections to a dexconf-generated # XF86Config or XF86Config-4 file?" in /usr/share/doc/xfree86-common/FAQ.gz. Section "Files" FontPath "unix/:7100" # local font server # if the local font server has problems, we can fall back on these FontPath "/usr/lib/X11/fonts/misc" FontPath "/usr/lib/X11/fonts/cyrillic" FontPath "/usr/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/lib/X11/fonts/Type1" FontPath "/usr/lib/X11/fonts/Speedo" FontPath "/usr/lib/X11/fonts/100dpi" FontPath "/usr/lib/X11/fonts/75dpi" EndSection Section "Module" Load "GLcore" Load "bitmap" Load "dbe" Load "ddc" Load "dri" Load "extmod" Load "freetype" Load "glx" Load "int10" Load "record" Load "speedo" Load "type1" Load "vbe" Load "pex5" Load "xie" EndSection Section "InputDevice" Identifier "Generic Keyboard" Driver "keyboard" Option "CoreKeyboard" Option "XkbRules" "xfree86" Option "XkbModel" "pc102" Option "XkbLayout" "fr" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" Option "Device" "/dev/psaux" Option "Protocol" "ImPS/2" Option "Emulate3Buttons" "true" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Generic Mouse" Driver "mouse" Option "SendCoreEvents" "true" Option "Device" "/dev/input/mice" Option "Protocol" "ImPS/2" Option "Emulate3Buttons" "true" Option "ZAxisMapping" "4 5" EndSection Section "Device" Identifier "Banshee" Driver "tdfx" BusID "PCI:0:9:0" EndSection Section "Device" Identifier "Ati" Driver "ati" BusID "PCI:1:0:0" EndSection Section "Monitor" Identifier "Ecran Sony" HorizSync 30-70 VertRefresh 50-160 Option "DPMS" ModeLine "768x576" 47.30 768 800 960 1024 576 578 590 616 EndSection Section "Monitor" Identifier "Ecran Rezo" HorizSync 30-57 VertRefresh 43-72 Option "DPMS" EndSection Section "Screen" Identifier "Primaire" Device "Ati" Monitor "Ecran Sony" DefaultDepth 16 SubSection "Display" Depth 1 Modes "1280x1024" EndSubSection SubSection "Display" Depth 4 Modes "1280x1024" EndSubSection SubSection "Display" Depth 8 Modes "1280x1024" EndSubSection SubSection "Display" Depth 15 Modes "1280x1024" EndSubSection SubSection "Display" Depth 16 Modes "1280x1024" "768x576" EndSubSection SubSection "Display" Depth 24 Modes "1280x1024" EndSubSection EndSection Section "Screen" Identifier "Secondaire" Device "Banshee" Monitor "Ecran Rezo" DefaultDepth 16 SubSection "Display" Depth 1 Modes "1024x768" EndSubSection SubSection "Display" Depth 4 Modes "1024x768" EndSubSection SubSection "Display" Depth 8 Modes "1024x768" EndSubSection SubSection "Display" Depth 15 Modes "1024x768" EndSubSection SubSection "Display" Depth 16 Modes "1024x768" EndSubSection SubSection "Display" Depth 24 Modes "1024x768" EndSubSection EndSection Section "ServerLayout" Identifier "Default Layout" Screen "Primaire" Screen "Secondaire" LeftOf "Primaire" InputDevice "Generic Keyboard" InputDevice "Configured Mouse" InputDevice "Generic Mouse" EndSection Section "DRI" Mode 0666 EndSection ### END DEBCONF SECTION