Hello,
J'aimerais faire fonctionner smartmontools sur ma debian etch avec noyau
halfetch 2.6.24.
Apparemment, je supporte la technologie smart :
# smartctl -i -d ata /dev/sda
smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: ST3320620AS
Serial Number: 9QF22KEW
Firmware Version: 3.AAJ
User Capacity: 320 072 933 376 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sun Aug 24 12:17:21 2008 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Mais, quand je veux voir les caractérisitqques par valeur de mon disque
dur, ca ne amrche aps:
# smartctl -a /dev/sda
smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
Device: ATA ST3320620AS Version: 3.AA
Serial number: 9QF22KEW
Device type: disk
Local Time is: Sun Aug 24 12:17:52 2008 CEST
Device does not support SMART
Error Counter logging not supported
[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
Device does not support Self Test logging
J'ai tenté ca: smartctl -s on -d ata /dev/sda puis, smartctl -S on -d
ata /dev/sda, mais ca n'a pas l'air de changer quelque chose.
# smartctl -S on -d ata /dev/sda
smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
Error SMART Enable Auto-save failed: Input/output error
Smartctl: SMART Enable Attribute Autosave Failed.
A mandatory SMART command failed: exiting. To continue, add one or more
'-T permissive' options.
Malgrès le fait que j'ai du raid + lvm sur cette machine, ca serait
interessant d'arriver à faire fonctionner smartmontools dessus en plus :-)
Une idée?
Merci :-)
--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/DebFrFrenchLists
Vous pouvez aussi ajouter le mot ``spam'' dans vos champs "From" et
"Reply-To:"
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]