Hi,
> > *Do you experience the problem with CD-R or CD-RW media ?*
> Yes. The exact same error message as when I tried to make a DVD.
Then it is not exactly the same problem as with the DRW-24D5MT of
Mauro Sacchetto and my BW-16D1HT as of Debian bug 998718.
Your Brasero version 3.12.1-4ubuntu2
Hi,
C. Clear wrote:
> What does doing a power off/on cycle entail ???
Just a shutdown so that the burner drive has no electrical power.
If in doubt whether the power is really off, press the drive's eject
button. The drive should not react.
Have a nice day :)
Thomas
--
You received this
Hi,
C. Clear wrote:
> Drive type : vendor 'ASUS' product 'BW-16D1HT' revision '3.10'
That would match the Debian bug of last year.
> Did try Nero for Linux and had the same
> result as I did with Brasero.
Keep in mind that in the Debian bug scenario Brasero's bad read attempt
spoiled the
Hi,
the error message stems from the burner drive and was forwarded by libburn
to Brasero. Strangely the code ASC=21 , ASCQ=04 is not specified in in
the SCSI specs for optical drives (MMC).
In the overall error code list
https://www.t10.org/lists/asc-num.htm
it is listed for other device
Hi,
sorry for your drive.
But good for Linux burn programs that MS-Windows does not know something
essential about drive error messages which we Linuxers don't know.
> the srange this is that if you use the Disks program in utilities.
That's probably a message from the kernel via systemd and
Hi,
well, at least we got over the strange error code.
> libburn : SORRY : Timeout exceed (3 ms). Retry canceled.
> libburn : SORRY : Command: READ DISC INFORMATION #63,[2 04 00] : 51 00
> 00 00 00 00 00 00 22 00 : dxfer_len= 34
The command READ DISC INFORMATION was retried 63 times. The
Correction:
The single command READ DISC INFORMATION probably did not timeout, but was
repeated
with intermediate waiting until 30 seconds had elapsed. So the drive probably
reacts swiftly but
always says that it is not yet ready.
--
You received this bug notification because you are a member
Hi,
> libburn : SORRY : Asynchronous SCSI error on waiting after START UNIT
> (+ LOAD) [6 28 81] Drive event. Unknown ASCQ with drive event ASC 28.
Grr. A higher level intervened.
In line 198 of file
~/xorriso/xorriso-1.5.3/libburn/spc.c
there is
if (key == 0x6 &&
The line with the absolute address was meant to be:
/home/chris/xorriso/xorriso-1.5.3/xorriso/xorriso -outdev /dev/sr0
-toc
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to brasero in Ubuntu.
https://bugs.launchpad.net/bugs/1896804
Hi,
> Sense Key 6 "Drive event", ASC 28 ASCQ 81.
This SCSI error reply is not listed in SCSI specs SPC or MMC or in the
summary of T10 committee
https://www.t10.org/lists/asc-num.htm#ASC_28
So the drive's firmware programmers were overly creative.
If it was ASCQ 0 or 2, then libburn would
I forgot to ask for putting in the desired medium before performing
xorriso -outdev /dev/sr0 -toc
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to brasero in Ubuntu.
https://bugs.launchpad.net/bugs/1896804
Title:
CD/DVD drive
Hi,
i understand from the category "brasero package" that you inspect the drive
by Brasero.
Which burn backend is it using (cdrecord, wodim, libburn ) ?
What kind of medium did you try (CD-R, DVD+R, DVD-R, DVD+RW, BD-R, ...) ?
Which task of Brasero do you want to perform (Audio project, Data
I feel like the update im-config 0.34-1ubuntu1.1 bugged out ibus-mozc on
Wayland.
I'm getting crashes in LibreOffice---and in some other applications
(Gnome shell search bar), the candidate window is not showing up. It
was definitely working at some point before this update.
Could be that I'm
Hi,
the first message about lack of permissions is common and should be
harmless. The failure happens possibly with the attempt to get 16 MiB
of memory via call mmap(2). But it is not obvious why this only succeeds
if you are superuser.
So this might too be a red herring and the actual reason for
Hi,
regrettably there is no debugging facility in libisofs which one could
enable without modifying Brasero. Further the Joliet mangler of libisofs
does not produce messages even if i enable DEBUG verbosity when it runs
underneath xorriso.
The problem with libisofs is only that it does not
*** This bug is a security vulnerability ***
Public security bug reported:
See the bug report
https://bugs.launchpad.net/ubuntu/+source/evolution/+bug/1738564
created with ubuntu-bug.
Apport includes the file JournalErrors.txt
This file includes e.g. the following line.
Dez 16 19:11:31
JournalErrors.txt has been deleted – see
https://bugs.launchpad.net/ubuntu/+source/apport/+bug/1738581
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to evolution in Ubuntu.
https://bugs.launchpad.net/bugs/1738564
Title:
'File/Save
** Attachment removed: "JournalErrors.txt"
https://bugs.launchpad.net/ubuntu/+source/evolution/+bug/1738564/+attachment/5023512/+files/JournalErrors.txt
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to evolution in Ubuntu.
On some machines I'm using a 'no change backport' from artfull:
3.26.2-1~ubuntu16.04.1~c42.ppa1 from ppa:dirk-computer42/c42-backport-gnome3
The problem isn't related to this version - so it seems for me to be
solved (or hidden) in a newer version.
--
You received this bug notification
Public bug reported:
Composing a new mail and selecting in the menu '/File/Save As' should
normally save the composed email message to a local file.
This applies to the current xenial package: 3.18.5.2-0ubuntu3.2 and can
be reproduced on several machines.
ProblemType: Bug
DistroRelease: Ubuntu
Hi,
the initial error report of 2009 is probably due to a hardware problem
in the computers bus controller, or the cabling, or the drive's bus
controller.
> BraseroWodim stderr: CDB: 2A 00 00 01 6C 7E 00 00 1F 00
> ...
> BraseroWodim stderr: Sense Key: 0x0 No Additional Sense, Segment 11
> ...
>
The undocumented location is implemented in the file pkcs11/gkm/gkm-
util.c
gkm_util_locate_keyrings_directory (void)
{
[…]
old_directory = g_build_filename (g_get_home_dir (), ".gnome2",
"keyrings", NULL);
new_directory = g_build_filename (g_get_user_data_dir (), "keyrings",
Public bug reported:
I found keyrings on different locations.
Sometime below ~/.gnome2/keyrings, sometimes below ~/.local/share/keyrings/,
sometimes in both locations.
The README.Debian is only mentioning: .gnome2/keyrings
The man page for gnome-keyring-daemon doesn't document any location.
** Package changed: ubuntu => nautilus (Ubuntu)
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to nautilus in Ubuntu.
https://bugs.launchpad.net/bugs/1705290
Title:
all windows are put in the top left cornerThe following packages
Public bug reported:
The handling of codepages by gedit is inconsistent and
may corrupt files and/or cause loss of data:
gedit 3.18.3 / Ubuntu 16.04 LTS
If I use the command
gedit --encoding ISO-8859-15
If, for some reason, the (new) input contains an UTF-8 character
(e.g., by typing, or
** Summary changed:
- locales are missing
+ locales are missing - menu entries and messages only in english
** Attachment added: "Here is a sample screen shot."
The problem applies also to the packages in
ppa:gnome3-team/gnome3-staging
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to evolution in Ubuntu.
https://bugs.launchpad.net/bugs/1584538
Title:
locales are missing
To manage
Public bug reported:
The localization is missing in evolution-common.
e.g. the file /usr/share/locale/de/LC_MESSAGES/evolution-3.18.mo
The debian version in stretch contain this file.
Comparing the file size of the packages between debian and ubuntu show also
that a huge part of files are
Hi,
it is quite sure that you do not suffer from this old bug.
Please file a new bug. Tell what you did with which program,
which drive, which kind of media. Tell what error messages
you get when you try to read the discs.
Please notify me by mail to scdbac...@gmx.net about the
new bug report
Dani, your problem is not related to this old Brasero bug.
You experience problems between drive and medium after
Brasero, libburn, and the drive all accepted the medium
as suitable for writing. The drive performed two WRITE
commands before it complained about the outcome of the
third one.
This narrows the set to: DVD-R, DVD-RW, DVD+R, DVD+RW.
(DVD-RAM and DVD+R DL have significantly different sizes.)
You should try a different brand of media. Best a different
type. E.g. try DVD+R if the failing ones are DVD-R.
If all reachable kinds of DVD fail, then consider to exchange
the
Hi,
since the problem will soon be old enough to go to school,
i propose to fix a bug in the libburn plugin of Brasero
which is to see at
https://git.gnome.org/browse/brasero/tree/plugins/libburnia/burn-libburn.c#n558
This line obviously gets a number out of brasero's state:
Hi,
the drive tells libburn that the medium is not a DVD-RW
but a DVD+R. xorriso forwards this info:
Media current: DVD+R
Media status : is written , is closed
The perception of media type stems from 00 1b in the reply
to the GET CONFIGURATION command
GET CONFIGURATION
46 00 00 00 00 00
still a problem in raring
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gdm in Ubuntu.
https://bugs.launchpad.net/bugs/449506
Title:
No GUI option to set screen rotation of greeter
To manage notifications about this bug go to:
*** This bug is a duplicate of bug 1004515 ***
https://bugs.launchpad.net/bugs/1004515
** Also affects: accountsservice (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gdm in
*** This bug is a duplicate of bug 1004515 ***
https://bugs.launchpad.net/bugs/1004515
** This bug has been marked a duplicate of bug 1004515
segfault in accounts-daemon when logging in
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is
** Summary changed:
- segfault in accounts-daemon when logging in
+ segfault in accounts-daemon when logging in / gdm crash if user account is
added or deleted
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gdm in Ubuntu.
I have a similar problem as described in
https://bugs.launchpad.net/ubuntu/+source/accountsservice/+bug/1067414
I can confirm that the solution is to upgrade the accountservice
packages.
In my ppa https://launchpad.net/~dirk-
computer42/+archive/c42-backport/+packages I provide a no change
Add backport request https://bugs.launchpad.net/bugs/1184572
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gdm in Ubuntu.
https://bugs.launchpad.net/bugs/1004515
Title:
segfault in accounts-daemon when logging in / gdm crash if
Problem also triggered by installing libvirt-bin and virt-manager which
triggers the add of:
libvirt-qemu:x:124:128:Libvirt Qemu,,,:/var/lib/libvirt:/bin/false
libvirt-dnsmasq:x:125:138:Libvirt Dnsmasq,,,:/var/lib/libvirt/dnsmasq:/bin/false
---
Ubuntu Bug Squad volunteer triager
Error message in syslog: gdm-session-wor[4145]: segfault at 50 ip
7f0a30df22ff sp 7499e230 error 4 in
libc-2.15.so[7f0a30d72000+1b5000]
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gdm in Ubuntu.
Maybe related:
https://bugs.launchpad.net/ubuntu/+source/accountsservice/+bug/1004515
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gdm in Ubuntu.
https://bugs.launchpad.net/bugs/1067414
Title:
gdm crashes if a user account is
Problem still existing
---
Ubuntu Bug Squad volunteer triager
http://wiki.ubuntu.com/BugSquad
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gdm in Ubuntu.
https://bugs.launchpad.net/bugs/1067414
Title:
gdm crashed if a user
On 05/17/2013 08:19 PM, Matthieu Baerts wrote:
Hello and thank you for this bug report,
Is it maybe possible to share a screenshot with us?
Do you also have this bug if you use the dock without the OpenGL backend?
$ cairo-dock -c
Or with the default theme?
$ cairo-dock -d ~/cd-tmp
On 05/17/2013 11:20 PM, Matthieu Baerts wrote:
Ok thank you,
Can you check that you're using Compiz? E.g. by launching this command from a
terminal which should print something if Compiz is running:
$ ps aux | grep [c]ompiz
If Compiz is running, can you give us more details about your
Hi,
i am the developer of libburn, which might be employed as burn backend
by Brasero. In this case i offer my help with finding the reasons of failure.
Needed would be a tester with an affected Brasero program, the necessary
type of media, and the willingness to run experiments with command
Hi,
i noticed that the properties of DVD-RW are misrepresented
in some of the posts.
DVD-RW can assume two states: sequential and overwritable.
The sequential state behaves much like CD-R or DVD-R. The medium
has an own table-of-content where it records the track boundaries
of one or more burn
Hi,
i am the developer of libburn, which would probably be in charge
for burning underneath Brasero in younger Ubuntu versions.
(One can learn from Brasero logs, whether libburn is used as
burn backend. Search for Libburn.)
There was a bug when the application asked for minimum speed
and the
Hi,
To my own experience, the code which governs creation and burning of
ISO images on-the-fly is separate from the code that governs burning
of pre-produced image files from hard disk.
(I am developer of libburn and libisofs, not a user of Brasero.
But i once had reason to find out how Brasero
Hi,
So I was in good luck that I only had to wait 2 days for the fix :-)
I guess the fix for your problem was available since a while.
But if you had installed it, you had gotten the bug that was fixed here.
So your luck is a very wise one which knows how long to wait. Congrats.
Have a nice
Hi,
As source I used the downloaded ISO of PartedMagic from 2012_11_30.
I simply opened this with Brasero to start burning on a DVD-RW,
which first had to be erased.
The bug that was fixed here did not affect burning of prepared
ISO images, but only composition of ISO images from hard disk
Hi,
I was using a CD-RW, not DVD-RW, 650 MB, 4x
I'm not sure, if -format would concern here?
Not with xorriso, and not desirable for your purpose.
Now I tried again with just updated 3.4.1-0ubuntu1.1:
Burning took ~ 10 min. at 4x -- successful
Some bugs were fixed in the meantime. The bug
Hi,
i am glad to see that this time not the libburn plugin is
to blame. :))
Telling from the log, i would say that burning via libburn
succeeded:
Burning from 0 to 355990
TAO pre-track 01 : get_nwa(0)=1, d=0 , demand=729067520 , cap=736966656
[... no visible error messages ...]
Aync CLOSE
Hi,
there was a brasero bug fixed in the course of
https://bugs.launchpad.net/ubuntu/+source/brasero/+bug/780117
which began by a different problem but collected several
reports about unmountable CD and DVD.
It hit data burning on-the-fly but not burning of pre-produced
ISO images or of CD
Hi,
some technical comments to Nico Zanferrari's notes:
(I always use a fresh standard live 32 bit USB key with the same DVD-RW)
[...]
- the unreadable coasters produced from other Ubuntu versions are seen as
blank disk from standard brasero 12.10, and can be easily blanked with it.
This is
Hi,
this problem could be caused by the Brasero bug
that was found in the course of
https://bugs.launchpad.net/ubuntu/+source/brasero/+bug/780117
Have a nice day :)
Thomas
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to brasero
Public bug reported:
Scenario:
* LDAP User Account (NFS Home Directory)
* nslcd and gdm are used
* user account information is manipulated, e.g. apt-get remove --purge tomcat7*
Result:
gdm session crashed
Syslog:
Oct 16 17:48:29 dilbert kernel: [24735.236935] gdm-session-wor[4316] general
Hi,
for completeness: One of the two Debian patches replaces
the theory of SAO-versus-TAO.
It turned out that the function, which transmits the
libisofs image data to the burn software, dropped every
second data block. (Actually the first block of each pair
of blocks.)
Hi,
Paul Menzel wrote:
The way to solve this error, is that people provide the necessary log
files from Brasero and to improve the things Thomas Schmitt and George
Danchev have found out to be incorrect [1].
Well, actually we [George and me] do not have any good idea left what
goes wrong
Hi,
Austin Dempewolff wrote:
I'm not sure if my problem was exactly the same bug (Brasero was producing
coasters
without any errors,
That seems to be the much more often occuring problem, although it is
not the original cause of this bug report thread.
but I was burning ISOs, not data
Hi,
i wrote:
cdrskin -tao padsize=300k -v dev=/dev/sr0 blank=as_needed -eject image.iso
Austin Dempewolff wrote:
Done, worked great. Stdout attached.
I assume you tested full readability afterwards.
That cdrskin command is supposed to do quite the same with libburn
as Brasero does. One
Hi,
i am the upstream programmer of libisofs and libburn but not
directly involved in Brasero.
Andrea Amoroso wrote in #63:
still the mp3 cds I burnt are full of the mp3 i chose, with some
of them unreadable and others readable but with many lags
It is not clear to me whether libisofs was
Am 17.11.2011 11:08, schrieb Sebastien Bacher:
Thank you for taking the time to report this bug and helping to make
Ubuntu better. Please answer these questions:
I forgot to mention the OS version, it's 11.10 with German language
* Is this reproducible?
yes
* If so, what specific steps should
Public bug reported:
I have the german implementation, where places is called orte.
Clicking on that just jumps into the files display and doesn't bring the
popup window which was available in former version. So I can't insert
any domain or user names or passwords. No connection to desired place
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to nautilus in Ubuntu.
https://bugs.launchpad.net/bugs/891259
Title:
application part places does not show popup window for selections
To manage notifications about this bug go to:
*** This bug is a duplicate of bug 731785 ***
https://bugs.launchpad.net/bugs/731785
** This bug has been marked a duplicate of bug 731785
failure to establish video stream
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to
*** This bug is a duplicate of bug 731785 ***
https://bugs.launchpad.net/bugs/731785
** This bug has been marked a duplicate of bug 731785
failure to establish video stream
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to
** Tags added: natty
** Tags added: lucid
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to empathy in Ubuntu.
https://bugs.launchpad.net/bugs/731785
Title:
failure to establish video stream
To manage notifications about this bug
After migration from lucid to natty the problem hasn't happens any more.
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gdm in Ubuntu.
https://bugs.launchpad.net/bugs/676442
Title:
gdm ignore sometimes nis accounts
To manage
I have here the problem since migration from lucid to natty.
If i switch the gnome-network-preferences from direct connection to
automatic proxy configuration epiphany crashes.
With direct connection no problem occurs.
** Summary changed:
- epiphany-browser segmentation fault with url *
+
** Summary changed:
- gdm ingore sometimes nis accounts
+ gdm ignore sometimes nis accounts
--
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gdm in ubuntu.
https://bugs.launchpad.net/bugs/676442
Title:
gdm ignore sometimes nis
Me too.
epiphany-browser 2.30.2-1ubuntu1.1 lucid de.archive.ubuntu.com
epiphany-browser 2.30.2-1ubuntu1.1 install ok installed
libgirepository1.0-0 0.9.3-0ubuntu1~ppa10.04+1 install ok installed
libgirepository1.0-0 0.6.8-1 lucid de.archive.ubuntu.com
Public bug reported:
Binary package hint: gdm
I have here a quick computer ( AMD Phenom(tm) II X6, SSD).
The GDM seems to start before nis account infos are loaded.
The nis users accounts are not shown in the greeter (local accounts are
visible).
Entering the user name of a nis account works.
--
gdm ingore sometimes nis accounts
https://bugs.launchpad.net/bugs/676442
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to gdm in ubuntu.
--
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
** Tags added: maverick
--
compiz --replace fails to kill metacity, resulting in cpu overload
https://bugs.launchpad.net/bugs/389686
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is subscribed to metacity in ubuntu.
--
desktop-bugs mailing list
Similar problem in maverick for a Fujitsu T4310 notebook.
Running icewm doesn't cause a problem.
Running compiz, metacity or mutter trigger this problem.
Workaround in xorg.conf fixes this problem for me and allow start of gdm again
Section Extensions
Option Composite Disable
EndSection
in addition to what I said above: when I try with firefox and this causes
firefox to crash I get messages in .xsession-errors
Here is the relvant part of .xsession-errors:
(firefox-bin:2449): Gtk-CRITICAL **: _gtk_file_system_model_get_iter_for_file:
assertion `G_IS_FILE (file)' failed
**
No, I don't get any messages related to this problem in ~/.xsession-
errors (I repeated the procedure described above and monitored the
output in xsession-errors with: tail -f ~/.xsession-errors)
Nevertheless I attached my xsession-errors file. Tell me if you need any
additional information.
**
Public bug reported:
release: Ubuntu 10.04, Ubuntu 10.10
package: libgtk2.0-0 2.20.1-0ubuntu2 (Ubuntu 10.04), libgtk2.0-0
2.21.6-1ubuntu1 (Ubuntu 10.10)
Creating a new folder using gtk filechooser dialog does not work when in
the current directory some network related file activity takes place
Public bug reported:
Binary package hint: empathy
We use our own internal CA for ssl certificates.
The CA certificate is properly installed in /etc/ssl/certs and proved to work
with other applications (e.g. postfix, lynx, ...).
Empathy seems to ignore the system wide file ca certificates in
changed package to gtk+2.0
** Changed in: gtk+2.0 (Ubuntu)
Sourcepackagename: None = gtk+2.0
--
Usability of gnome file chooser when saving file to new folder
https://bugs.launchpad.net/bugs/293767
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is
Update for 8.10:
The dialog pops up on ssh-add, but not on SSH login attempts.That still
isn't particularly nice, but at least the system is in a usable state
after clicking Deny only once.
--
ssh always asks to unlock private key with no password set
https://bugs.launchpad.net/bugs/187127
You
Frankly, I didn't quite understand the request from upstream. Has there
been any change inside 8.04 that justifies creating a new user to test
this with, or would it be more appropriate to test with 8.10 already?
--
ssh always asks to unlock private key with no password set
Sorry, no time to do it on 8.10 right now, but here you go on 8.04:
---
groupadd martin2
useradd -g martin2 -d /home/martin2 -m -s /bin/bash martin2
passwd martin2
mkdir ~martin2/.ssh
cp ~martin/.ssh/id_dsa ~martin/.ssh/id_dsa.pub ~martin2/.ssh
chown -R martin2:martin2 ~martin2/.ssh
Log out
-BEGIN DSA PRIVATE KEY-
What did you expect?
--
ssh always asks to unlock private key with no password set
https://bugs.launchpad.net/bugs/187127
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is a bug assignee.
--
desktop-bugs mailing list
Similar issue here, 8.04 final.
Even though ssh-agent has been unlocked via ssh-add, the dialog comes up
everytime the ssh-agent is being used for anything. After clicking
Refuse (or whatever the untranslated button is called), regular
operation proceeds.
How do I disable this annoying popup? I
Okay,I found directions on how to fix this at:
http://live.gnome.org/GnomeKeyring/Ssh
gconftool-2 --set -t bool /apps/gnome-keyring/daemon-components/ssh
false silences the SSH part of gnome-keyring.
--
ssh always asks to unlock private key with no password set
Dear Carthik,
thanks for your enquiry. My entire computer configuration has changed. I
have a completely new computer and printer. Furthermore, I switched to
KDE (Kubuntu, Edgy) and so, I'm not using Evince by default any more.
Hence, I cannot answer your question. But so far, printing is
88 matches
Mail list logo