When PF establishes a connection with Switch Manager, it receives
a logic port range from SM, and registers certain logic ports from
that range, then a default VID will be send back from SM. This whole
transaction needs to be finished in dev_init, otherwise, in dev_start
the interrupt setting will be changed according to RX queue number,
and probably will cause this transaction failed.
Signed-off-by: Shaopeng He <shaopeng.he at intel.com>
Acked-by: Jing Chen <jing.d.chen at intel.com>
---
drivers/net/fm10k/fm10k_ethdev.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/net/fm10k/fm10k_ethdev.c b/drivers/net/fm10k/fm10k_ethdev.c
index 9b210d7..2cb0b94 100644
--- a/drivers/net/fm10k/fm10k_ethdev.c
+++ b/drivers/net/fm10k/fm10k_ethdev.c
@@ -2786,6 +2786,21 @@ eth_fm10k_dev_init(struct rte_eth_dev *dev)
fm10k_mbx_unlock(hw);
+ /* Make sure default VID is ready before going forward. */
+ if (hw->mac.type == fm10k_mac_pf) {
+ for (i = 0; i < MAX_QUERY_SWITCH_STATE_TIMES; i++) {
+ if (hw->mac.default_vid)
+ break;
+ /* Delay some time to acquire async port VLAN info. */
+ rte_delay_us(WAIT_SWITCH_MSG_US);
+ }
+
+ if (!hw->mac.default_vid) {
+ PMD_INIT_LOG(ERR, "default VID is not ready");
+ return -1;
+ }
+ }
+
/* Add default mac address */
fm10k_MAC_filter_set(dev, hw->mac.addr, true,
MAIN_VSI_POOL_NUMBER);
--
1.9.3
