Additional support for HARQ memory loopback
Signed-off-by: Nicolas Chautru <nicolas.chau...@intel.com>
Acked-by: Liu Tianjiao <tianjiao....@intel.com>
---
drivers/baseband/acc100/rte_acc100_pmd.c | 158 +++++++++++++++++++++++++++++++
1 file changed, 158 insertions(+)
diff --git a/drivers/baseband/acc100/rte_acc100_pmd.c
b/drivers/baseband/acc100/rte_acc100_pmd.c
index b223547..e484c0a 100644
--- a/drivers/baseband/acc100/rte_acc100_pmd.c
+++ b/drivers/baseband/acc100/rte_acc100_pmd.c
@@ -658,6 +658,7 @@
RTE_BBDEV_LDPC_HQ_COMBINE_IN_ENABLE |
RTE_BBDEV_LDPC_HQ_COMBINE_OUT_ENABLE |
#ifdef ACC100_EXT_MEM
+ RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_LOOPBACK |
RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_IN_ENABLE |
RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_OUT_ENABLE |
#endif
@@ -1480,12 +1481,169 @@
return 1;
}
+static inline int
+harq_loopback(struct acc100_queue *q, struct rte_bbdev_dec_op *op,
+ uint16_t total_enqueued_cbs) {
+ struct acc100_fcw_ld *fcw;
+ union acc100_dma_desc *desc;
+ int next_triplet = 1;
+ struct rte_mbuf *hq_output_head, *hq_output;
+ uint16_t harq_in_length = op->ldpc_dec.harq_combined_input.length;
+ if (harq_in_length == 0) {
+ rte_bbdev_log(ERR, "Loopback of invalid null size\n");
+ return -EINVAL;
+ }
+
+ int h_comp = check_bit(op->ldpc_dec.op_flags,
+ RTE_BBDEV_LDPC_HARQ_6BIT_COMPRESSION
+ ) ? 1 : 0;
+ if (h_comp == 1)
+ harq_in_length = harq_in_length * 8 / 6;
+ harq_in_length = RTE_ALIGN(harq_in_length, 64);
+ uint16_t harq_dma_length_in = (h_comp == 0) ?
+ harq_in_length :
+ harq_in_length * 6 / 8;
+ uint16_t harq_dma_length_out = harq_dma_length_in;
+ bool ddr_mem_in = check_bit(op->ldpc_dec.op_flags,
+ RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_IN_ENABLE);
+ union acc100_harq_layout_data *harq_layout = q->d->harq_layout;
+ uint16_t harq_index = (ddr_mem_in ?
+ op->ldpc_dec.harq_combined_input.offset :
+ op->ldpc_dec.harq_combined_output.offset)
+ / ACC100_HARQ_OFFSET;
+
+ uint16_t desc_idx = ((q->sw_ring_head + total_enqueued_cbs)
+ & q->sw_ring_wrap_mask);
+ desc = q->ring_addr + desc_idx;
+ fcw = &desc->req.fcw_ld;
+ /* Set the FCW from loopback into DDR */
+ memset(fcw, 0, sizeof(struct acc100_fcw_ld));
+ fcw->FCWversion = ACC100_FCW_VER;
+ fcw->qm = 2;
+ fcw->Zc = 384;
+ if (harq_in_length < 16 * N_ZC_1)
+ fcw->Zc = 16;
+ fcw->ncb = fcw->Zc * N_ZC_1;
+ fcw->rm_e = 2;
+ fcw->hcin_en = 1;
+ fcw->hcout_en = 1;
+
+ rte_bbdev_log(DEBUG, "Loopback IN %d Index %d offset %d length %d %d\n",
+ ddr_mem_in, harq_index,
+ harq_layout[harq_index].offset, harq_in_length,
+ harq_dma_length_in);
+
+ if (ddr_mem_in && (harq_layout[harq_index].offset > 0)) {
+ fcw->hcin_size0 = harq_layout[harq_index].size0;
+ fcw->hcin_offset = harq_layout[harq_index].offset;
+ fcw->hcin_size1 = harq_in_length - fcw->hcin_offset;
+ harq_dma_length_in = (fcw->hcin_size0 + fcw->hcin_size1);
+ if (h_comp == 1)
+ harq_dma_length_in = harq_dma_length_in * 6 / 8;
+ } else {
+ fcw->hcin_size0 = harq_in_length;
+ }
+ harq_layout[harq_index].val = 0;
+ rte_bbdev_log(DEBUG, "Loopback FCW Config %d %d %d\n",
+ fcw->hcin_size0, fcw->hcin_offset, fcw->hcin_size1);
+ fcw->hcout_size0 = harq_in_length;
+ fcw->hcin_decomp_mode = h_comp;
+ fcw->hcout_comp_mode = h_comp;
+ fcw->gain_i = 1;
+ fcw->gain_h = 1;
+
+ /* Set the prefix of descriptor. This could be done at polling */
+ desc->req.word0 = ACC100_DMA_DESC_TYPE;
+ desc->req.word1 = 0; /**< Timestamp could be disabled */
+ desc->req.word2 = 0;
+ desc->req.word3 = 0;
+ desc->req.numCBs = 1;
+
+ /* Null LLR input for Decoder */
+ desc->req.data_ptrs[next_triplet].address =
+ q->lb_in_addr_phys;
+ desc->req.data_ptrs[next_triplet].blen = 2;
+ desc->req.data_ptrs[next_triplet].blkid = ACC100_DMA_BLKID_IN;
+ desc->req.data_ptrs[next_triplet].last = 0;
+ desc->req.data_ptrs[next_triplet].dma_ext = 0;
+ next_triplet++;
+
+ /* HARQ Combine input from either Memory interface */
+ if (!ddr_mem_in) {
+ next_triplet = acc100_dma_fill_blk_type_out(&desc->req,
+ op->ldpc_dec.harq_combined_input.data,
+ op->ldpc_dec.harq_combined_input.offset,
+ harq_dma_length_in,
+ next_triplet,
+ ACC100_DMA_BLKID_IN_HARQ);
+ } else {
+ desc->req.data_ptrs[next_triplet].address =
+ op->ldpc_dec.harq_combined_input.offset;
+ desc->req.data_ptrs[next_triplet].blen =
+ harq_dma_length_in;
+ desc->req.data_ptrs[next_triplet].blkid =
+ ACC100_DMA_BLKID_IN_HARQ;
+ desc->req.data_ptrs[next_triplet].dma_ext = 1;
+ next_triplet++;
+ }
+ desc->req.data_ptrs[next_triplet - 1].last = 1;
+ desc->req.m2dlen = next_triplet;
+
+ /* Dropped decoder hard output */
+ desc->req.data_ptrs[next_triplet].address =
+ q->lb_out_addr_phys;
+ desc->req.data_ptrs[next_triplet].blen = BYTES_IN_WORD;
+ desc->req.data_ptrs[next_triplet].blkid = ACC100_DMA_BLKID_OUT_HARD;
+ desc->req.data_ptrs[next_triplet].last = 0;
+ desc->req.data_ptrs[next_triplet].dma_ext = 0;
+ next_triplet++;
+
+ /* HARQ Combine output to either Memory interface */
+ if (check_bit(op->ldpc_dec.op_flags,
+ RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_OUT_ENABLE
+ )) {
+ desc->req.data_ptrs[next_triplet].address =
+ op->ldpc_dec.harq_combined_output.offset;
+ desc->req.data_ptrs[next_triplet].blen =
+ harq_dma_length_out;
+ desc->req.data_ptrs[next_triplet].blkid =
+ ACC100_DMA_BLKID_OUT_HARQ;
+ desc->req.data_ptrs[next_triplet].dma_ext = 1;
+ next_triplet++;
+ } else {
+ hq_output_head = op->ldpc_dec.harq_combined_output.data;
+ hq_output = op->ldpc_dec.harq_combined_output.data;
+ next_triplet = acc100_dma_fill_blk_type_out(
+ &desc->req,
+ op->ldpc_dec.harq_combined_output.data,
+ op->ldpc_dec.harq_combined_output.offset,
+ harq_dma_length_out,
+ next_triplet,
+ ACC100_DMA_BLKID_OUT_HARQ);
+ /* HARQ output */
+ mbuf_append(hq_output_head, hq_output, harq_dma_length_out);
+ op->ldpc_dec.harq_combined_output.length =
+ harq_dma_length_out;
+ }
+ desc->req.data_ptrs[next_triplet - 1].last = 1;
+ desc->req.d2mlen = next_triplet - desc->req.m2dlen;
+ desc->req.op_addr = op;
+
+ /* One CB (one op) was successfully prepared to enqueue */
+ return 1;
+}
+
/** Enqueue one decode operations for ACC100 device in CB mode */
static inline int
enqueue_ldpc_dec_one_op_cb(struct acc100_queue *q, struct rte_bbdev_dec_op *op,
uint16_t total_enqueued_cbs, bool same_op)
{
int ret;
+ if (unlikely(check_bit(op->ldpc_dec.op_flags,
+ RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_LOOPBACK))) {
+ ret = harq_loopback(q, op, total_enqueued_cbs);
+ return ret;
+ }
union acc100_dma_desc *desc;
uint16_t desc_idx = ((q->sw_ring_head + total_enqueued_cbs)
--
1.8.3.1
