[dpdk-dev] kernel panic when stop my test demo

On 2014/10/15 18:08, Richardson, Bruce wrote: > > >> -Original Message- >> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Lilijun >> Sent: Wednesday, October 15, 2014 10:43 AM >> To: dev at dpdk.org; stephen at networkplumber.org >> Subject: R

[dpdk-dev] kernel panic when stop my test demo

> -Original Message- > From: Lilijun [mailto:jerry.lilijun at huawei.com] > Sent: Thursday, October 16, 2014 3:40 AM > To: Richardson, Bruce; dev at dpdk.org; stephen at networkplumber.org > Subject: Re: [dpdk-dev] kernel panic when stop my test demo > > On 2014/10

[dpdk-dev] kernel panic when stop my test demo

Hi all, After adding unmap uio resources operations in process signal handler functions, An new error was found as follows: Call Trace: [] uio_release+0x40/0x60 [uio] [] __fput+0xe9/0x270 [] fput+0xe/0x10 [] task_work_run+0xa7/0xe0 [] do_notify_resume+0x97/0xb0 [] int_signal+0x12/0x17

[dpdk-dev] kernel panic when stop my test demo

Hi Stephen and all, I have a same problem as this older email describes on Aug 14, 2013. Any help will be appreciated. The details is shown as follows. The key step implementation of my demo is: 1. Firstly, call rte_eal_init() to do some initialization. 2. Switch the driver of my Intel 82599

[dpdk-dev] kernel panic when stop my test demo

Hi ereryone, I have a problem when I stop my test demo with ?CTRL+C?, and then kernel panic. Any suggestions? BTW, I?m using the version 1.4.1-7 in RHEL6.4, kernel version is 3.2.28 uio device registered with irq 33 general protection fault: [#1] SMP CPU 2 Modules linked

[dpdk-dev] kernel panic when stop my test demo

Does your application have a signal handler and stop the device on shutdown? Since DPDK app's have raw access to the hardware it is critical to stop the hardware on exit. Other wise the Ethernet device can overwrite random memory. Perhaps the igb_uio driver should also have a fail safe and write