All:
I have to use uart0 as the HCI, but I want to use the console too. Anyone do
this before?
I'm assuming I have to change the BSP, but I think it's more that that.
Jeff
Hi Jeff,
In general, NimBLE host does assume that (depending on features
enabled) certain functionality has to be supported by controller and
it will just try to use it. For example, if Privacy feature is enabled
host assumes that Link Layer Privacy is supported by controller thus
at least 4.2
Jeff:
I may not be answering the question you want but the controller itself runs on
the nordic chips only so you will not be able to run the nimble controller on
those devices. What *is* supported is the nimble host. The nimble host should
be able to talk to any controller. The set of HCI
All:
I was wondering how mynewt handles different controller. For example
CC2564b vs BCM43438
Both of these have a 4 wire HCI interface, but I would think they would have
slightly different command sets. When working with HCI, is there a list of
qualified BT controllers it works with?
Jeff
Hi Jeff,
It seems you have explicit dependency to net/nimble/transport/ram
somewhere in your configuration (target, I suppose) which you need to
remove. bleprph app already includes net/nimble/transport package
which pulls proper HCI transport package depending on
BLE_HCI_TRANSPORT_* syscfg
Hi Jeff,
The `ble_hci_ram_rx_cmd_ll_cb` callback should be getting configured by
the controller at startup (assuming you are running the
combined-host-controller).
I have a few questions:
1. What version of Mynewt are you using?
2. What changes have you made to the apps that are failing?
Also,
Nimble error?
I have tried the bleprph and bleuart and both fail at this point in the
ble_hci_ram.c
assert(ble_hci_ram_rx_cmd_ll_cb != NULL);
Either I'm missing a setting or maybe an error in Nimble
/This is the whole trace
#12 0x08020b30
Hi Andrey,
I have built Android and iOS NewtMgr implementations which are
currently in a "private beta" (if you will) and are still under active
development. The plan is to release these libraries (Apache 2.0) when
they have stabilized, which for Android should be soon.
If you'd like access to
+1 (binding)
Best,
Sasa
On Fri, Jun 22, 2018 at 7:14 AM, Szymon Janc wrote:
> Hello all,
>
> I am pleased to be calling this vote for the source release of
> Apache Mynewt 1.4.1.
>
> Apache Mynewt is a community-driven, permissively licensed open source
> initiative for constrained, embedded
Hi
On Fri, Jun 22, 2018, 16:14 Szymon Janc wrote:
> Hello all,
>
> I am pleased to be calling this vote for the source release of
> Apache Mynewt 1.4.1.
>
> Apache Mynewt is a community-driven, permissively licensed open source
> initiative for constrained, embedded applications. Mynewt
Hi,
+1 (binding)
Best,
Andrzej
On Fri, Jun 22, 2018 at 4:14 PM Szymon Janc wrote:
>
> Hello all,
>
> I am pleased to be calling this vote for the source release of
> Apache Mynewt 1.4.1.
>
> Apache Mynewt is a community-driven, permissively licensed open source
> initiative for constrained,
I dont know if that runtime sensors app has firmware update, but it has oic
which would get you close
https://github.com/runtimeco/android_sensor
Also I have a web bluetooth solution that would work on a lot of android
phones
https://github.com/jacobrosenthal/web-newtmgr
On Wed, Jun 27, 2018
Also I keep getting these errors when I try to debug, any ideas
Program received signal SIGTRAP, Trace/breakpoint trap.
__assert_func (file=0x0, line=0, func=, e=)
at repos/apache-mynewt-core/kernel/os/src/arch/cortex_m4/os_fault.c:137
137asm("bkpt");
(gdb) c
Continuing.
A few more questions
1) If I configure to UART 2, what pins does it select. UART 2 on the STM32F4
can be configured to different pins.
2) HAL_UART_FLOW_CTL_RTS_CTS <- Where is this definition
3) When Selection UART 2. Is that actual UART 2 or is it really UART 1.
What I mean to say the
Hi René,
unittest framework was developed assuming that apps themselves
would not have test suites. Only individual packages/libraries.
So the method you described is pretty much what you’d need to do.
Or alternatively create a library out of the components you want to
create unittests for.
>
15 matches
Mail list logo