Re: Arduino zero Blinky : build bootloader error

Hi Sterling, Thanks for pointing out. I haven't played with SWD interface either. Arduino M0 was the only board which was available locally which roughly matches the BSPs supported by MyNewt. I already have given my address to Aditi. Anyway, I'll send it to you as well. Regards, Sanjeewa On

Re: Arduino zero Blinky : build bootloader error

Hi Pradeep, It looks like CN2 brings out the SWD interface (here: http://download.arduino.org/products/M0/arduino-M0-schematic.pdf), although I haven't played with one myself. I'll give it a try Monday, when I have access to a Segger to play with. Either way, if you ping me or Aditi

Re: Arduino zero Blinky : build bootloader error

Hi Sterling, It just has an SPI header. No pin-out for jtag :( Looks like I'm in bit of a trouble here. Regards, Sanjeewa On Sun, May 15, 2016 at 11:11 PM, Sterling Hughes < sterling.hughes.pub...@gmail.com> wrote: > Hi Pradeep: > > Welcome! > > Unfortunately the M0 does not have built in

Re: Arduino zero Blinky : build bootloader error

Hi Pradeep: Welcome! Unfortunately the M0 does not have built in debugger access like the M0 Pro, Zero and Zero Pro, which is why we haven't yet added support for it. I believe it does bring out pins that allows you to connect a jtag debugger, so if you have one handy: that should help you

Re: Arduino zero Blinky : build bootloader error

Hi Christopher, Somehow I had missed that part. Thanks for noting. But still there is a error : Error: unable to find CMSIS-DAP device. Please note that I'm not using Docker Regards, Sanjeewa On Sun, May 15, 2016 at 9:26 PM, Christopher Collins wrote: > Hi Pradeep, > > On

Re: Arduino zero Blinky : build bootloader error

Hi Pradeep, On Sun, May 15, 2016 at 06:47:29PM +0530, Pradeep Sanjeewa wrote: > But when I try to download the bootloader (newt load arduino_boot) , it > gives an error. > > line 61: openocd: command not found > Error: exit status 127 Did you see the documentation for getting started in Linux?

Arduino zero Blinky : build bootloader error

Hi All, I am in the process of implementing blinky on Arduino M0(which is not supported yet). I am following the tutorial "Blinky on Arduino Zero" . There was an error when trying to build the bootloader. Command : $ newt build arduino_boot