lug USB cable in
>
> - Issue fastboot devices command to verify
>
>
>
> Dave Hylands
>
>
>
>
> From: "Michael Meelis"
> To: mozilla...@lists.mozilla.org
> Sent: Wednesday, October 22, 2014 3:34:04 AM
> Subject: Re: [b2g] Bricked flame. help: Only adb si
, October 22, 2014 3:34:04 AM
> Subject: Re: [b2g] Bricked flame. help: Only adb sideload file still works.
> Op maandag 20 oktober 2014 10:14:23 UTC+2 schreef ahmad...@gmail.com:
> > On Tuesday, 14 October 2014 12:37:02 UTC+5, Julien Wajsberg wrote:
> >
> > > > Problem I
Op maandag 20 oktober 2014 10:14:23 UTC+2 schreef ahmad...@gmail.com:
> On Tuesday, 14 October 2014 12:37:02 UTC+5, Julien Wajsberg wrote:
>
> > > Problem I face is that when these instructions are followed (whether
>
> >
>
> > Power+VolDown or adb reboot bootloader) by set boots displaying th
Op maandag 20 oktober 2014 10:14:23 UTC+2 schreef ahmad...@gmail.com:
> On Tuesday, 14 October 2014 12:37:02 UTC+5, Julien Wajsberg wrote:
>
> > > Problem I face is that when these instructions are followed (whether
>
> >
>
> > Power+VolDown or adb reboot bootloader) by set boots displaying th
On Tuesday, 14 October 2014 12:37:02 UTC+5, Julien Wajsberg wrote:
> > Problem I face is that when these instructions are followed (whether
>
> Power+VolDown or adb reboot bootloader) by set boots displaying the
>
> ThunderSoft logo and stays that way for indefinite time.
>
>
>
> This is fast
> Problem I face is that when these instructions are followed (whether
Power+VolDown or adb reboot bootloader) by set boots displaying the
ThunderSoft logo and stays that way for indefinite time.
This is fastboot mode :)
In this state, you can plug in your device, call "fastboot devices", and
exp
On Monday, 13 October 2014 16:15:53 UTC+5, florin.strugariu wrote:
> I had the same issue with my flame.
>
>
>
> Take out the battery and put it back in; Then press the power button and
>
> vol down at the same time for a few sec.
>
> This should start the phone in fast boot mode. After this
I had the same issue with my flame.
Take out the battery and put it back in; Then press the power button and
vol down at the same time for a few sec.
This should start the phone in fast boot mode. After this you can run
the flash script.
Hope it works,
Bebe
On 11.10.2014 15:28, Michael Meel
On 09.10.2014 21:57, Michael Meelis wrote:
> Hi, seems I bricked my flame with a 2.1 shallow-flash over 1.3 installed.
> Seems I read the instruction page incorrectly and was hoping for some
> safeguard protection.
>
> fastboot <...> is not working anymore. 'adb sideload ' does still
> work. Pr
Op vrijdag 10 oktober 2014 20:37:32 UTC+2 schreef Kartikaya Gupta:
> On 9/10/2014, 15:57, Michael Meelis wrote:
>
> > Hi, seems I bricked my flame with a 2.1 shallow-flash over 1.3 installed.
> > Seems I read the instruction page incorrectly and was hoping for some
> > safeguard protection.
>
>
On 9/10/2014, 15:57, Michael Meelis wrote:
Hi, seems I bricked my flame with a 2.1 shallow-flash over 1.3 installed. Seems
I read the instruction page incorrectly and was hoping for some safeguard
protection.
fastboot <...> is not working anymore. 'adb sideload ' does still
work. Problem is:
Hi, seems I bricked my flame with a 2.1 shallow-flash over 1.3 installed. Seems
I read the instruction page incorrectly and was hoping for some safeguard
protection.
fastboot <...> is not working anymore. 'adb sideload ' does still
work. Problem is: I keep on getting aborts because of signature
Le 30/09/2014 19:38, Dietrich Ayala a écrit :
> Thanks Julien. No vibration ever happens.
>
> The only way I ever see any reaction on the device is a single blink of the
> LED when I am holding voldown+sleep with battery removed and then plug into
> USB.
As far as I remember, this is a symptom
Thanks Julien. No vibration ever happens.
The only way I ever see any reaction on the device is a single blink of the LED
when I am holding voldown+sleep with battery removed and then plug into USB.
___
dev-b2g mailing list
dev-b2g@lists.mozilla.org
htt
Le 29/09/2014 00:28, Dietrich Ayala a écrit :
> While flashing a Flame to the new KK base image, the script exited partway
> through flashing fsg, saying couldn't detect device.
>
> Now the device will not turn on at all. If I remove the battery, then hold
> voldown+sleep and plug in USB, I can
While flashing a Flame to the new KK base image, the script exited partway
through flashing fsg, saying couldn't detect device.
Now the device will not turn on at all. If I remove the battery, then hold
voldown+sleep and plug in USB, I can see the LED next to the front-camera flash
briefly. How
16 matches
Mail list logo