Hi,
See
> http://www.xilinx.com/support/answers/29310.htm (and specifically NOTE 3)
>
> You should have the file xusbdfwu.rules in /etc/udev/rules.d/ and the .hex
> files
> in /usr/share.
>
yes, i did follow manually xusbdfwu.rules copied from
/ISE_install_dir/bin/lin/xusbdfwu.hex
and all xusb*.
On Tuesday 16 November 2010 12:21:57 Adam Wang wrote:
> But my Platform Cable USB II LED doesn't light up when I plug it after
> installed fxload.
> Somethings I still missed?
See
http://www.xilinx.com/support/answers/29310.htm (and specifically NOTE 3)
You should have the file xusbdfwu.rules in
> But my Platform Cable USB II LED doesn't light up when I plug it after
> installed fxload.
> Somethings I still missed?
>
Bus 002 Device 018: ID 03fd:0013 Xilinx, Inc. <<== shown by lsusb.
Adam
___
http://lists.milkymist.org/listinfo.cgi/devel-milkymi
Hi,
when you try to use the cable 1 times out of 5, etc.)
>
> If your cable's LED lights up when you plug it (ie firmware was
> successfully
> loaded with fxload), all you should need to do is run impact, since ISE
> 11.1
> libusb support (that replaces that windrv6 crap) is included and enabled b
> "Sébastien" == Sébastien Bourdeauducq writes:
Sébastien> On Tuesday 16 November 2010 11:07:37 Uwe Bonnes wrote:
>> Don't use windrv6. It is a security hole as big as a barn door.
Sébastien> And it doesn't even work (cable detection works half the
Sébastien> time, kernel pa
On Tuesday 16 November 2010 11:07:37 Uwe Bonnes wrote:
> Don't use windrv6.
> It is a security hole as big as a barn door.
And it doesn't even work (cable detection works half the time, kernel panics
when you try to use the cable 1 times out of 5, etc.)
If your cable's LED lights up when you plu
> "Adam" == Adam Wang writes:
Adam> Hi, Could someone provide some hints on installing drivers while
Adam> running iMPACT?
Adam>
--
Adam> AutoDetecting cable. Please wait. PROGRES
Hi,
I used "sudo su" to do without no effect.
so:
1, Ubuntu uses "bash" by default as the "shell".
2, I have changed the /bin/sh to bin/bash
3.1, wget wget
http://www.xilinx.com/support/documentation/user_guides/install_drivers.tar.gz
3.2, tar xvf install_drivers.tar.gz
3.3 cd install_drivers
3.4
